On Thu, 23 Aug 2007 01:50:10 +0530
Kamalesh Babulal <[email protected]> wrote:
> Hi Andrew,
>
> I see call trace followed by the kernel bug with the 2.6.23-rc3-mm1
> kernel and have attached the boot log and config file.
>
> =======================================================
> SLUB: Genslabs=12, HWalign=128, Order=0-1, MinObjects=4, CPUs=4, Nodes=16
> Bad page state in process 'swapper'
> page:cf00000000015818 flags:0x0000020000000400 mapping:0000000000000000
> mapcount:0 count:0
> Trying to fix it up, but a reboot is needed
> Backtrace:
> Call Trace:
> [c0000000005cbab0] [c000000000010344] .show_stack+0x68/0x1b4 (unreliable)
> [c0000000005cbb60] [c0000000000a6c54] .bad_page+0x84/0x138
> [c0000000005cbbf0] [c0000000000aa9e0] .free_hot_cold_page+0xdc/0x21c
> [c0000000005cbc90] [c0000000000ad7ec] .put_page+0x158/0x180
> [c0000000005cbd30] [c0000000000d4de8] .kfree+0x74/0xf0
> [c0000000005cbdb0] [c0000000000a866c] .process_zones+0x1a8/0x1f8
> [c0000000005cbe60] [c0000000004b5160] .setup_per_cpu_pageset+0x24/0x48
> [c0000000005cbee0] [c0000000004978d8] .start_kernel+0x304/0x3f4
> [c0000000005cbf90] [c0000000003bef10] .start_here_common+0x54/0x58
> Hexdump:
> 000: cf 00 00 00 00 01 57 d0 00 00 02 00 00 00 04 00
> 010: 00 00 00 01 ff ff ff ff 00 00 00 00 00 00 00 00
> 020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 030: cf 00 00 00 00 01 58 08 cf 00 00 00 00 01 58 08
> 040: 00 00 02 00 00 00 04 00 00 00 00 00 ff ff ff ff
> 050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 060: 00 00 00 00 00 00 00 00 cf 00 00 00 00 01 58 40
> 070: cf 00 00 00 00 01 58 40 00 00 02 00 00 00 04 00
> 080: 00 00 00 01 ff ff ff ff 00 00 00 00 00 00 00 00
> 090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0a0: cf 00 00 00 00 01 58 78 cf 00 00 00 00 01 58 78
> 0b0: 00 00 02 00 00 00 04 00 00 00 00 01 ff ff ff ff
> ------------[ cut here ]------------
> kernel BUG at mm/page_alloc.c:2876!
> cpu 0x0: Vector: 700 (Program Check) at [c0000000005cbbe0]
> pc: c0000000004b5160: .setup_per_cpu_pageset+0x24/0x48
> lr: c0000000004b5160: .setup_per_cpu_pageset+0x24/0x48
> sp: c0000000005cbe60
> msr: 8000000000029032
> current = 0xc0000000004fd1b0
> paca = 0xc0000000004fdd80
> pid = 0, comm = swapper
> kernel BUG at mm/page_alloc.c:2876!
>
Looks like process_zones() got a kmalloc_node() failure and then crashed in
the recovery code.
This:
--- a/mm/page_alloc.c~a
+++ a/mm/page_alloc.c
@@ -2814,6 +2814,8 @@ static int __cpuinit process_zones(int c
return 0;
bad:
for_each_zone(dzone) {
+ if (!populated_zone(zone))
+ continue;
if (dzone == zone)
break;
kfree(zone_pcp(dzone, cpu));
_
might help avoid the crash, but why did kmalloc_node() fail?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]