This patch contains errata fixes for the realtek phy. It only renamed the
defines to be phy specific.
Signed-off-by: Ayaz Abdulla <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
---
drivers/net/forcedeth.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 54 insertions(+), 0 deletions(-)
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index c383dc3..dbfdbed 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -554,6 +554,7 @@ union ring_type {
#define PHY_OUI_MARVELL 0x5043
#define PHY_OUI_CICADA 0x03f1
#define PHY_OUI_VITESSE 0x01c1
+#define PHY_OUI_REALTEK 0x01c1
#define PHYID1_OUI_MASK 0x03ff
#define PHYID1_OUI_SHFT 6
#define PHYID2_OUI_MASK 0xfc00
@@ -583,6 +584,13 @@ union ring_type {
#define PHY_VITESSE_INIT8 0x0100
#define PHY_VITESSE_INIT9 0x8f82
#define PHY_VITESSE_INIT10 0x0
+#define PHY_REALTEK_INIT_REG1 0x1f
+#define PHY_REALTEK_INIT_REG2 0x19
+#define PHY_REALTEK_INIT_REG3 0x13
+#define PHY_REALTEK_INIT1 0x0000
+#define PHY_REALTEK_INIT2 0x8e00
+#define PHY_REALTEK_INIT3 0x0001
+#define PHY_REALTEK_INIT4 0xad17
#define PHY_GIGABIT 0x0100
@@ -1106,6 +1114,28 @@ static int phy_init(struct net_device *dev)
return PHY_ERROR;
}
}
+ if (np->phy_oui == PHY_OUI_REALTEK) {
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.
", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
+ printk(KERN_INFO "%s: phy init failed.
", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
+ printk(KERN_INFO "%s: phy init failed.
", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
+ printk(KERN_INFO "%s: phy init failed.
", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.
", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ }
/* set advertise register */
reg = mii_rw(dev, np->phyaddr, MII_ADVERTISE, MII_READ);
@@ -1242,6 +1272,30 @@ static int phy_init(struct net_device *dev)
return PHY_ERROR;
}
}
+ if (np->phy_oui == PHY_OUI_REALTEK) {
+ /* reset could have cleared these out, set them back */
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.
", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
+ printk(KERN_INFO "%s: phy init failed.
", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
+ printk(KERN_INFO "%s: phy init failed.
", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
+ printk(KERN_INFO "%s: phy init failed.
", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.
", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ }
+
/* some phys clear out pause advertisment on reset, set it back */
mii_rw(dev, np->phyaddr, MII_ADVERTISE, reg);
--
1.5.2.5
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
