On Tuesday 21 August 2007 14:27:31 Alan Cox wrote:
> > The transfer mode decreases from UDMA/100 to UDMA/66 and then UDMA/33 but
> > it doesn't help at all. The drive itself is fine, the problems also
> > appear with
>
> Does it settle at UDMA33 or keep going down lower ?
It does not go below UDMA33.
dd if=/dev/zero of=some.file bs=131072 count=1024 takes 526 seconds (amazing
transfer rate 255KB/s) with system being unresponsive most of the time.
Commenting out the UDMA support in sata_via.c (.udma_mask and .set_dmamode for
PATA port) causes the driver to run in PIO4 mode which seems to work without
errors but slowly (3MB/s with 100% CPU load).
--
Ondrej Zary
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
