> Tested on ATP865 (1191:0008 rev 07) in a DS101 box (an ARM-based NAS).
> Seems to work fine.
Its tested fairly hard on several NAS boxes (and still needs a fix for
one)
> However, I'm gettting consistently lower read throughput with pata_artop
> (13-19 MB/s) than with aec62xx (22 MB/s) on an oldish WD drive, and using
> pata_artop triggers a WARN_ON(irqs_disabled()) in arch/arm/mm/consistent.c:
It would be nice to know why - is the cable detet coming out right on
this ?
> WARNING: at arch/arm/mm/consistent.c:364 dma_free_coherent()
ARM has a problem with dma_free_coherent with IRQ disabled. Unfortunately
under high load ARM decides to use dma_free_coherent inside
dma_unmap_sg(). This as far as I can see is an ARM problem not a libata
problem and one you can duplicate with other drivers under high load.
If any ARM people can tell me what is going on and help fix it either in
ARM or libata that would be great.
Alan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
