Re: 2.6.23-rc1: USB hard disk broken

[David Brownell <david-b@pacbell.net>]

On Sunday 05 August 2007, Oliver Neukum wrote:
> > 
> > 2007-08-05_10:30:27.75572 kern.err:
> > 		ehci_hcd 0000:00:1d.7: dev 6 ep1in scatterlist error 0/-121

That's rather strange since it means a *success* (urb->status 0) was
reported after a short read (scatterlist status -120, -EREMOTEIO).

The hardware should have stopped queue processing after the short
read, because of how qtd->hw_alt_next gets set up ... at least,
that's how I remember it, these many years after writing that code.

It might be that because of the issue noted below, it was wrongly
restarted by the software.


> > 2007-08-05_10:30:27.86576 kern.info: usb 1-6: reset high speed USB device using ehci_hcd and address 5
> > 2007-08-05_10:30:55.95293 kern.info: usb 1-6: USB disconnect, address 5
> > 2007-08-05_10:30:55.95300 kern.err:
> > 		ehci_hcd 0000:00:1d.7: dev 6 ep1in scatterlist error -108/-108 

That one just means nobody updated that test to recognize that
the -ESHUTDOWN (-108) triggered after disconnect is a "clean"
failure like the ones triggered by unlinking.

However it also indicates that something changed in the unlink
code paths, since I see the *expected* code (-ECONNRESET) is no
longer being set by usbcore during unlinks ... it's not quite
clear to me what else that change will have broken.  Including
whether that might not explain how the hardware queue got wrongly
restarted after the short read above.

- Dave

 
> David, does this error say anything to you?


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/