[RFC][PATCH] uli526x: Add suspend and resume routines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[Sorry for the excessive CCs, but I don't know who's the maintainer. ;-)]
---
From: Rafael J. Wysocki <[email protected]>

Add suspend/resume support to the uli526x network driver (tested on x86_64,
with "Ethernet controller: ALi Corporation M5263 Ethernet Controller, rev 40").

This patch is based on the suspend/resume code in the tg3 driver.

Signed-off-by: Rafael J. Wysocki <[email protected]>
---
 drivers/net/tulip/uli526x.c |  108 +++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 102 insertions(+), 6 deletions(-)

Index: linux-2.6.23-rc2/drivers/net/tulip/uli526x.c
===================================================================
--- linux-2.6.23-rc2.orig/drivers/net/tulip/uli526x.c	2007-08-05 20:18:57.000000000 +0200
+++ linux-2.6.23-rc2/drivers/net/tulip/uli526x.c	2007-08-05 20:47:07.000000000 +0200
@@ -1110,19 +1110,15 @@ static void uli526x_timer(unsigned long 
 
 
 /*
- *	Dynamic reset the ULI526X board
  *	Stop ULI526X board
  *	Free Tx/Rx allocated memory
- *	Reset ULI526X board
- *	Re-initialize ULI526X board
+ *	Init system variable
  */
 
-static void uli526x_dynamic_reset(struct net_device *dev)
+static void uli526x_reset_prepare(struct net_device *dev)
 {
 	struct uli526x_board_info *db = netdev_priv(dev);
 
-	ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
-
 	/* Sopt MAC controller */
 	db->cr6_data &= ~(CR6_RXSC | CR6_TXSC);	/* Disable Tx/Rx */
 	update_cr6(db->cr6_data, dev->base_addr);
@@ -1141,6 +1137,22 @@ static void uli526x_dynamic_reset(struct
 	db->link_failed = 1;
 	db->init=1;
 	db->wait_reset = 0;
+}
+
+
+/*
+ *	Dynamic reset the ULI526X board
+ *	Stop ULI526X board
+ *	Free Tx/Rx allocated memory
+ *	Reset ULI526X board
+ *	Re-initialize ULI526X board
+ */
+
+static void uli526x_dynamic_reset(struct net_device *dev)
+{
+	ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
+
+	uli526x_reset_prepare(dev);
 
 	/* Re-initialize ULI526X board */
 	uli526x_init(dev);
@@ -1150,6 +1162,88 @@ static void uli526x_dynamic_reset(struct
 }
 
 
+#ifdef CONFIG_PM_SLEEP
+
+/*
+ *	Suspend the interface.
+ */
+
+static int uli526x_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	int err = 0;
+
+	ULI526X_DBUG(0, "uli526x_suspend", 0);
+
+	if (dev && netdev_priv(dev)) {
+		pci_power_t power_state;
+
+		pci_save_state(pdev);
+
+		if (!netif_running(dev))
+			return 0;
+
+		netif_device_detach(dev);
+		uli526x_reset_prepare(dev);
+
+		power_state = pci_choose_state(pdev, state);
+		pci_enable_wake(pdev, power_state, 0);
+		err = pci_set_power_state(pdev, power_state);
+		if (err) {
+			netif_device_attach(dev);
+			/* Re-initialize ULI526X board */
+			uli526x_init(dev);
+			/* Restart upper layer interface */
+			netif_wake_queue(dev);
+		}
+	}
+	return err;
+}
+
+/*
+ *	Resume the interface.
+ */
+
+static int uli526x_resume(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct uli526x_board_info *db = netdev_priv(dev);
+
+	ULI526X_DBUG(0, "uli526x_resume", 0);
+
+	if (dev && db) {
+		int err;
+
+		pci_restore_state(pdev);
+
+		if (!netif_running(dev))
+			return 0;
+
+		err = pci_set_power_state(pdev, PCI_D0);
+		if (err) {
+			printk(KERN_WARNING
+				"%s: Could not put device into D0\n",
+				dev->name);
+			return err;
+		}
+
+		netif_device_attach(dev);
+		/* Re-initialize ULI526X board */
+		uli526x_init(dev);
+		/* Restart upper layer interface */
+		netif_wake_queue(dev);
+	}
+	return 0;
+}
+
+#else /* !CONFIG_PM_SLEEP */
+
+#define uli526x_suspend	NULL
+#define uli526x_resume	NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
+
 /*
  *	free all allocated rx buffer
  */
@@ -1689,6 +1783,8 @@ static struct pci_driver uli526x_driver 
 	.id_table	= uli526x_pci_tbl,
 	.probe		= uli526x_init_one,
 	.remove		= __devexit_p(uli526x_remove_one),
+	.suspend	= uli526x_suspend,
+	.resume		= uli526x_resume,
 };
 
 MODULE_AUTHOR("Peer Chen, [email protected]");
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux