Hi Linus,
Please pull from 'for-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6.git for-linus
to receive the following updates:
arch/blackfin/Kconfig | 2 +-
arch/blackfin/kernel/bfin_gpio.c | 291 ++++++++++++++--
arch/blackfin/kernel/init_task.c | 1 +
arch/blackfin/kernel/process.c | 2 +
arch/blackfin/kernel/sys_bfin.c | 1 +
arch/blackfin/kernel/traps.c | 1 +
arch/blackfin/mach-bf548/Kconfig | 4 +-
arch/blackfin/mach-bf548/boards/ezkit.c | 367 ++++++++++++++++++++-
arch/blackfin/mach-bf548/gpio.c | 98 +++++-
arch/blackfin/mach-common/ints-priority-dc.c | 4 +-
arch/blackfin/mach-common/ints-priority-sc.c | 8 +-
drivers/spi/spi_bfin5xx.c | 149 +++++----
include/asm-blackfin/bfin5xx_spi.h | 6 +
include/asm-blackfin/gpio.h | 31 ++
include/asm-blackfin/mach-bf533/bfin_serial_5xx.h | 11 +-
include/asm-blackfin/mach-bf533/blackfin.h | 2 +-
include/asm-blackfin/mach-bf533/irq.h | 2 +
include/asm-blackfin/mach-bf533/portmux.h | 2 +-
include/asm-blackfin/mach-bf537/bfin_serial_5xx.h | 23 +-
include/asm-blackfin/mach-bf537/blackfin.h | 2 +-
include/asm-blackfin/mach-bf537/irq.h | 2 +
include/asm-blackfin/mach-bf537/portmux.h | 35 ++-
include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 39 +--
include/asm-blackfin/mach-bf548/blackfin.h | 2 +-
include/asm-blackfin/mach-bf548/defBF54x_base.h | 17 +
include/asm-blackfin/mach-bf548/gpio.h | 5 -
include/asm-blackfin/mach-bf548/irq.h | 2 +
include/asm-blackfin/mach-bf561/bfin_serial_5xx.h | 11 +-
include/asm-blackfin/mach-bf561/blackfin.h | 2 +-
include/asm-blackfin/mach-bf561/irq.h | 2 +
include/asm-blackfin/portmux.h | 22 ++
31 files changed, 971 insertions(+), 175 deletions(-)
Bryan Wu (4):
Blackfin arch: bug fixing, add missing BF533_FAMILY GPIO_PFx definition
Blackfin arch: update platform driver resource information to the ezkitBF548 board file
Blackfin arch: after removing fs.h from mm.h, fix the broken on Blackfin arch.
Blackfin SPI driver: Initial supporting BF54x in SPI driver
Michael Hennerich (11):
Blackfin arch: store labels so we later know who allocated GPIO/Peripheral resources
Blackfin arch: add peripheral resource allocation support
Blackfin arch: Add label to call new GPIO API
Blackfin arch: fix PORT_J BUG for BF537/6 EMAC driver
Blackfin arch: Finalize the generic gpio support - add gpio_to_irq and irq_to_gpio
Blackfin arch: Advertise GENERIC_GPIO and remove duplicated GENERIC_CALIBRATE_DELAY
Blackfin arch: Add PORT_J.High (needed for BF548-EZkit Touchscreen interrupts) - remove PORT_C.H
Blackfin arch: add missing gpio error handling to make sure we roll back requests in case one fails
Blackfin serial driver: use new GPIO API
Blackfin SPI driver: Make BF54x SPI work and add support for portmux API
Blackfin SPI driver: use new GPIO API and add error handling
Mike Frysinger (1):
Blackfin arch: scrub remaining ASSEMBLY usage since the switch to __ASSEMBLY__
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 017defa..5c1e215 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -57,7 +57,7 @@ config GENERIC_TIME
bool
default n
-config GENERIC_CALIBRATE_DELAY
+config GENERIC_GPIO
bool
default y
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index bafcfa5..f712772 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -84,6 +84,7 @@
#include <linux/err.h>
#include <asm/blackfin.h>
#include <asm/gpio.h>
+#include <asm/portmux.h>
#include <linux/irq.h>
#ifdef BF533_FAMILY
@@ -115,7 +116,11 @@ static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
};
#endif
-static unsigned short reserved_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS + 16)];
+char *str_ident = NULL;
+
+#define RESOURCE_LABEL_SIZE 16
#ifdef CONFIG_PM
static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -143,22 +148,100 @@ inline int check_gpio(unsigned short gpio)
return 0;
}
+static void set_label(unsigned short ident, const char *label)
+{
+
+ if (label && str_ident) {
+ strncpy(str_ident + ident * RESOURCE_LABEL_SIZE, label,
+ RESOURCE_LABEL_SIZE);
+ str_ident[ident * RESOURCE_LABEL_SIZE +
+ RESOURCE_LABEL_SIZE - 1] = 0;
+ }
+}
+
+static char *get_label(unsigned short ident)
+{
+ if (!str_ident)
+ return "UNKNOWN";
+
+ return (str_ident[ident * RESOURCE_LABEL_SIZE] ?
+ (str_ident + ident * RESOURCE_LABEL_SIZE) : "UNKNOWN");
+}
+
+static int cmp_label(unsigned short ident, const char *label)
+{
+ if (label && str_ident)
+ return strncmp(str_ident + ident * RESOURCE_LABEL_SIZE,
+ label, strlen(label));
+ else
+ return -EINVAL;
+}
+
#ifdef BF537_FAMILY
static void port_setup(unsigned short gpio, unsigned short usage)
{
- if (usage == GPIO_USAGE) {
- if (*port_fer[gpio_bank(gpio)] & gpio_bit(gpio))
- printk(KERN_WARNING "bfin-gpio: Possible Conflict with Peripheral "
- "usage and GPIO %d detected!\n", gpio);
- *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
- } else
- *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
- SSYNC();
+ if (!check_gpio(gpio)) {
+ if (usage == GPIO_USAGE) {
+ *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ } else
+ *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
+ SSYNC();
+ }
}
#else
# define port_setup(...) do { } while (0)
#endif
+#ifdef BF537_FAMILY
+
+#define PMUX_LUT_RES 0
+#define PMUX_LUT_OFFSET 1
+#define PMUX_LUT_ENTRIES 41
+#define PMUX_LUT_SIZE 2
+
+static unsigned short port_mux_lut[PMUX_LUT_ENTRIES][PMUX_LUT_SIZE] = {
+ {P_PPI0_D13, 11}, {P_PPI0_D14, 11}, {P_PPI0_D15, 11},
+ {P_SPORT1_TFS, 11}, {P_SPORT1_TSCLK, 11}, {P_SPORT1_DTPRI, 11},
+ {P_PPI0_D10, 10}, {P_PPI0_D11, 10}, {P_PPI0_D12, 10},
+ {P_SPORT1_RSCLK, 10}, {P_SPORT1_RFS, 10}, {P_SPORT1_DRPRI, 10},
+ {P_PPI0_D8, 9}, {P_PPI0_D9, 9}, {P_SPORT1_DRSEC, 9},
+ {P_SPORT1_DTSEC, 9}, {P_TMR2, 8}, {P_PPI0_FS3, 8}, {P_TMR3, 7},
+ {P_SPI0_SSEL4, 7}, {P_TMR4, 6}, {P_SPI0_SSEL5, 6}, {P_TMR5, 5},
+ {P_SPI0_SSEL6, 5}, {P_UART1_RX, 4}, {P_UART1_TX, 4}, {P_TMR6, 4},
+ {P_TMR7, 4}, {P_UART0_RX, 3}, {P_UART0_TX, 3}, {P_DMAR0, 3},
+ {P_DMAR1, 3}, {P_SPORT0_DTSEC, 1}, {P_SPORT0_DRSEC, 1},
+ {P_CAN0_RX, 1}, {P_CAN0_TX, 1}, {P_SPI0_SSEL7, 1},
+ {P_SPORT0_TFS, 0}, {P_SPORT0_DTPRI, 0}, {P_SPI0_SSEL2, 0},
+ {P_SPI0_SSEL3, 0}
+};
+
+static void portmux_setup(unsigned short per, unsigned short function)
+{
+ u16 y, muxreg, offset;
+
+ for (y = 0; y < PMUX_LUT_ENTRIES; y++) {
+ if (port_mux_lut[y][PMUX_LUT_RES] == per) {
+
+ /* SET PORTMUX REG */
+
+ offset = port_mux_lut[y][PMUX_LUT_OFFSET];
+ muxreg = bfin_read_PORT_MUX();
+
+ if (offset != 1) {
+ muxreg &= ~(1 << offset);
+ } else {
+ muxreg &= ~(3 << 1);
+ }
+
+ muxreg |= (function << offset);
+ bfin_write_PORT_MUX(muxreg);
+ }
+ }
+}
+
+#else
+# define portmux_setup(...) do { } while (0)
+#endif
static void default_gpio(unsigned short gpio)
{
@@ -179,22 +262,15 @@ static void default_gpio(unsigned short gpio)
static int __init bfin_gpio_init(void)
{
- int i;
-
- printk(KERN_INFO "Blackfin GPIO Controller\n");
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE)
- reserved_map[gpio_bank(i)] = 0;
+ str_ident = kzalloc(RESOURCE_LABEL_SIZE * 256, GFP_KERNEL);
+ if (!str_ident)
+ return -ENOMEM;
-#if defined(BF537_FAMILY) && (defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
-# if defined(CONFIG_BFIN_MAC_RMII)
- reserved_map[gpio_bank(PORT_H)] = 0xC373;
-# else
- reserved_map[gpio_bank(PORT_H)] = 0xFFFF;
-# endif
-#endif
+ printk(KERN_INFO "Blackfin GPIO Controller\n");
return 0;
+
}
arch_initcall(bfin_gpio_init);
@@ -223,7 +299,7 @@ arch_initcall(bfin_gpio_init);
void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
{ \
unsigned long flags; \
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
local_irq_save(flags); \
if (arg) \
gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
@@ -243,7 +319,7 @@ SET_GPIO(both)
#define SET_GPIO_SC(name) \
void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
{ \
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
if (arg) \
gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
else \
@@ -258,7 +334,7 @@ SET_GPIO_SC(maskb)
void set_gpio_data(unsigned short gpio, unsigned short arg)
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
if (arg)
gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
@@ -277,7 +353,7 @@ SET_GPIO_SC(data)
void set_gpio_toggle(unsigned short gpio)
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
bfin_read_CHIPID();
@@ -286,7 +362,7 @@ void set_gpio_toggle(unsigned short gpio)
#else
void set_gpio_toggle(unsigned short gpio)
{
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
}
#endif
@@ -350,7 +426,7 @@ unsigned short get_gpio_data(unsigned short gpio)
{
unsigned long flags;
unsigned short ret;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->data >> gpio_sub_n(gpio));
bfin_read_CHIPID();
@@ -494,13 +570,14 @@ u32 gpio_pm_setup(void)
gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir;
gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge;
gpio_bank_saved[bank].both = gpio_bankb[bank]->both;
- gpio_bank_saved[bank].reserved = reserved_map[bank];
+ gpio_bank_saved[bank].reserved =
+ reserved_gpio_map[bank];
gpio = i;
while (mask) {
if (mask & 1) {
- reserved_map[gpio_bank(gpio)] |=
+ reserved_gpio_map[gpio_bank(gpio)] |=
gpio_bit(gpio);
bfin_gpio_wakeup_type(gpio,
wakeup_flags_map[gpio]);
@@ -540,7 +617,8 @@ void gpio_pm_restore(void)
gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge;
gpio_bankb[bank]->both = gpio_bank_saved[bank].both;
- reserved_map[bank] = gpio_bank_saved[bank].reserved;
+ reserved_gpio_map[bank] =
+ gpio_bank_saved[bank].reserved;
}
@@ -550,6 +628,147 @@ void gpio_pm_restore(void)
#endif
+
+
+
+int peripheral_request(unsigned short per, const char *label)
+{
+ unsigned long flags;
+ unsigned short ident = P_IDENT(per);
+
+ /*
+ * Don't cares are pins with only one dedicated function
+ */
+
+ if (per & P_DONTCARE)
+ return 0;
+
+ if (!(per & P_DEFINED))
+ return -ENODEV;
+
+ local_irq_save(flags);
+
+ if (!check_gpio(ident)) {
+
+ if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
+ printk(KERN_ERR
+ "%s: Peripheral %d is already reserved as GPIO by %s !\n",
+ __FUNCTION__, ident, get_label(ident));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ }
+
+ if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) {
+
+ /*
+ * Pin functions like AMC address strobes my
+ * be requested and used by several drivers
+ */
+
+ if (!(per & P_MAYSHARE)) {
+
+ /*
+ * Allow that the identical pin function can
+ * be requested from the same driver twice
+ */
+
+ if (cmp_label(ident, label) == 0)
+ goto anyway;
+
+ printk(KERN_ERR
+ "%s: Peripheral %d function %d is already"
+ "reserved by %s !\n",
+ __FUNCTION__, ident, P_FUNCT2MUX(per),
+ get_label(ident));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ }
+
+anyway:
+
+
+ portmux_setup(per, P_FUNCT2MUX(per));
+
+ port_setup(ident, PERIPHERAL_USAGE);
+
+ reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
+ local_irq_restore(flags);
+ set_label(ident, label);
+
+ return 0;
+}
+EXPORT_SYMBOL(peripheral_request);
+
+int peripheral_request_list(unsigned short per[], const char *label)
+{
+ u16 cnt;
+ int ret;
+
+ for (cnt = 0; per[cnt] != 0; cnt++) {
+
+ ret = peripheral_request(per[cnt], label);
+
+ if (ret < 0) {
+ for ( ; cnt > 0; cnt--) {
+ peripheral_free(per[cnt - 1]);
+ }
+ return ret;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(peripheral_request_list);
+
+void peripheral_free(unsigned short per)
+{
+ unsigned long flags;
+ unsigned short ident = P_IDENT(per);
+
+ if (per & P_DONTCARE)
+ return;
+
+ if (!(per & P_DEFINED))
+ return;
+
+ if (check_gpio(ident) < 0)
+ return;
+
+ local_irq_save(flags);
+
+ if (unlikely(!(reserved_peri_map[gpio_bank(ident)]
+ & gpio_bit(ident)))) {
+ local_irq_restore(flags);
+ return;
+ }
+
+ if (!(per & P_MAYSHARE)) {
+ port_setup(ident, GPIO_USAGE);
+ }
+
+ reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident);
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(peripheral_free);
+
+void peripheral_free_list(unsigned short per[])
+{
+ u16 cnt;
+
+ for (cnt = 0; per[cnt] != 0; cnt++) {
+ peripheral_free(per[cnt]);
+ }
+
+}
+EXPORT_SYMBOL(peripheral_free_list);
+
/***********************************************************
*
* FUNCTIONS: Blackfin GPIO Driver
@@ -574,13 +793,13 @@ int gpio_request(unsigned short gpio, const char *label)
local_irq_save(flags);
- if (unlikely(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
dump_stack();
local_irq_restore(flags);
return -EBUSY;
}
- reserved_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+ reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
local_irq_restore(flags);
@@ -599,7 +818,7 @@ void gpio_free(unsigned short gpio)
local_irq_save(flags);
- if (unlikely(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+ if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio);
dump_stack();
local_irq_restore(flags);
@@ -608,7 +827,7 @@ void gpio_free(unsigned short gpio)
default_gpio(gpio);
- reserved_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
local_irq_restore(flags);
}
@@ -618,7 +837,7 @@ void gpio_direction_input(unsigned short gpio)
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
@@ -631,7 +850,7 @@ void gpio_direction_output(unsigned short gpio)
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c
index b45188f..673c860 100644
--- a/arch/blackfin/kernel/init_task.c
+++ b/arch/blackfin/kernel/init_task.c
@@ -31,6 +31,7 @@
#include <linux/module.h>
#include <linux/init_task.h>
#include <linux/mqueue.h>
+#include <linux/fs.h>
static struct fs_struct init_fs = INIT_FS;
static struct files_struct init_files = INIT_FILES;
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 5a51dd6..6a7aefe 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -33,6 +33,8 @@
#include <linux/user.h>
#include <linux/a.out.h>
#include <linux/uaccess.h>
+#include <linux/fs.h>
+#include <linux/err.h>
#include <asm/blackfin.h>
#include <asm/fixed_code.h>
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index f5e1ae3..abcd148 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -37,6 +37,7 @@
#include <linux/syscalls.h>
#include <linux/mman.h>
#include <linux/file.h>
+#include <linux/fs.h>
#include <linux/uaccess.h>
#include <linux/ipc.h>
#include <linux/unistd.h>
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 8766bd6..792a841 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -31,6 +31,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/kallsyms.h>
+#include <linux/fs.h>
#include <asm/traps.h>
#include <asm/cacheflush.h>
#include <asm/blackfin.h>
diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig
index e78b03d..3976b7f 100644
--- a/arch/blackfin/mach-bf548/Kconfig
+++ b/arch/blackfin/mach-bf548/Kconfig
@@ -282,7 +282,7 @@ menu "Assignment"
config PINTx_REASSIGN
bool "Reprogram PINT Assignment"
- default n
+ default y
help
The interrupt assignment registers controls the pin-to-interrupt
assignment in a byte-wide manner. Each option allows you to select
@@ -303,7 +303,7 @@ config PINT1_ASSIGN
config PINT2_ASSIGN
hex "PINT2_ASSIGN"
depends on PINTx_REASSIGN
- default 0x00000101
+ default 0x07000101
config PINT3_ASSIGN
hex "PINT3_ASSIGN"
depends on PINTx_REASSIGN
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 96ad95f..59e64c5 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -35,9 +35,13 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/irq.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/dma.h>
+#include <asm/gpio.h>
+#include <asm/mach/nand.h>
+#include <asm/mach/bf54x_keys.h>
+#include <linux/spi/ad7877.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -48,6 +52,87 @@ char *bfin_board_name = "ADSP-BF548-EZKIT";
* Driver needs to know address, irq and flag pin.
*/
+#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+
+#include <asm/mach/bf54x-lq043.h>
+
+static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
+ .width = 480,
+ .height = 272,
+ .xres = {480, 480, 480},
+ .yres = {272, 272, 272},
+ .bpp = {24, 24, 24},
+ .disp = GPIO_PE3,
+};
+
+static struct resource bf54x_lq043_resources[] = {
+ {
+ .start = IRQ_EPPI0_ERR,
+ .end = IRQ_EPPI0_ERR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bf54x_lq043_device = {
+ .name = "bf54x-lq043",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bf54x_lq043_resources),
+ .resource = bf54x_lq043_resources,
+ .dev = {
+ .platform_data = &bf54x_lq043_data,
+ },
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+static int bf548_keymap[] = {
+ KEYVAL(0, 0, KEY_ENTER),
+ KEYVAL(0, 1, KEY_HELP),
+ KEYVAL(0, 2, KEY_0),
+ KEYVAL(0, 3, KEY_BACKSPACE),
+ KEYVAL(1, 0, KEY_TAB),
+ KEYVAL(1, 1, KEY_9),
+ KEYVAL(1, 2, KEY_8),
+ KEYVAL(1, 3, KEY_7),
+ KEYVAL(2, 0, KEY_DOWN),
+ KEYVAL(2, 1, KEY_6),
+ KEYVAL(2, 2, KEY_5),
+ KEYVAL(2, 3, KEY_4),
+ KEYVAL(3, 0, KEY_UP),
+ KEYVAL(3, 1, KEY_3),
+ KEYVAL(3, 2, KEY_2),
+ KEYVAL(3, 3, KEY_1),
+};
+
+static struct bfin_kpad_platform_data bf54x_kpad_data = {
+ .rows = 4,
+ .cols = 4,
+ .keymap = bf548_keymap,
+ .keymapsize = ARRAY_SIZE(bf548_keymap),
+ .debounce_time = 5000, /* ns (5ms) */
+ .coldrive_time = 1000, /* ns (1ms) */
+ .keyup_test_interval = 50, /* ms (50ms) */
+};
+
+static struct resource bf54x_kpad_resources[] = {
+ {
+ .start = IRQ_KEY,
+ .end = IRQ_KEY,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bf54x_kpad_device = {
+ .name = "bf54x-keys",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bf54x_kpad_resources),
+ .resource = bf54x_kpad_resources,
+ .dev = {
+ .platform_data = &bf54x_kpad_data,
+ },
+};
+#endif
+
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
@@ -94,6 +179,248 @@ static struct platform_device bfin_uart_device = {
};
#endif
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct resource smsc911x_resources[] = {
+ {
+ .name = "smsc911x-memory",
+ .start = 0x24000000,
+ .end = 0x24000000 + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PE8,
+ .end = IRQ_PE8,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE)
+static struct resource bf54x_hcd_resources[] = {
+ {
+ .start = 0xFFC03C00,
+ .end = 0xFFC040FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bf54x_hcd = {
+ .name = "bf54x-hcd",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bf54x_hcd_resources),
+ .resource = bf54x_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+static struct resource bfin_atapi_resources[] = {
+ {
+ .start = 0xFFC03800,
+ .end = 0xFFC0386F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_ATAPI_ERR,
+ .end = IRQ_ATAPI_ERR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_atapi_device = {
+ .name = "bf54x-atapi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_atapi_resources),
+ .resource = bfin_atapi_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF54X) || defined(CONFIG_MTD_NAND_BF54X_MODULE)
+static struct mtd_partition partition_info[] = {
+ {
+ .name = "Linux Kernel",
+ .offset = 0,
+ .size = 4 * SIZE_1M,
+ },
+ {
+ .name = "File System",
+ .offset = 4 * SIZE_1M,
+ .size = (256 - 4) * SIZE_1M,
+ },
+};
+
+static struct bf54x_nand_platform bf54x_nand_platform = {
+ .page_size = NFC_PG_SIZE_256,
+ .data_width = NFC_NWIDTH_8,
+ .partitions = partition_info,
+ .nr_partitions = ARRAY_SIZE(partition_info),
+ .rd_dly = 3,
+ .wr_dly = 3,
+};
+
+static struct resource bf54x_nand_resources[] = {
+ {
+ .start = 0xFFC03B00,
+ .end = 0xFFC03B4F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = CH_NFC,
+ .end = CH_NFC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bf54x_nand_device = {
+ .name = "bf54x-nand",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bf54x_nand_resources),
+ .resource = bf54x_nand_resources,
+ .dev = {
+ .platform_data = &bf54x_nand_platform,
+ },
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+/* SPI flash chip (m25p16) */
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00030000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ }, {
+ .name = "linux kernel",
+ .size = 0x1d0000,
+ .offset = 0x30000
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p16",
+};
+
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+ .cs_change_per_word = 0,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+ .cs_change_per_word = 1,
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+ .model = 7877,
+ .vref_delay_usecs = 50, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .pressure_max = 1000,
+ .pressure_min = 0,
+ .stopacq_polarity = 1,
+ .first_conversion_delay = 3,
+ .acquisition_time = 1,
+ .averaging = 1,
+ .pen_down_acc_interval = 1,
+};
+#endif
+
+static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 1, /* SPI_SSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+{
+ .modalias = "ad7877",
+ .platform_data = &bfin_ad7877_ts_info,
+ .irq = IRQ_PJ11,
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data = &spi_ad7877_chip_info,
+},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI0,
+ .end = CH_SPI0,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bf54x_spi_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device bf54x_spi_master_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
+ .dev = {
+ .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+ [0] = {
+ .start = 0xFFC01400,
+ .end = 0xFFC014FF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TWI0,
+ .end = IRQ_TWI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device i2c_bfin_twi0_device = {
+ .name = "i2c-bfin-twi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+ .resource = bfin_twi0_resource,
+};
+#endif
+
static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
@@ -102,12 +429,50 @@ static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
+
+#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+ &bf54x_lq043_device,
+#endif
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+ &smsc911x_device,
+#endif
+
+#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE)
+ &bf54x_hcd,
+#endif
+
+#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+ &bfin_atapi_device,
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF54X) || defined(CONFIG_MTD_NAND_BF54X_MODULE)
+ &bf54x_nand_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &bf54x_spi_master_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+ &bf54x_kpad_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+ &i2c_bfin_twi0_device,
+#endif
};
static int __init stamp_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bf54x_spi_board_info,
+ ARRAY_SIZE(bf54x_spi_board_info));
+#endif
+
return 0;
}
diff --git a/arch/blackfin/mach-bf548/gpio.c b/arch/blackfin/mach-bf548/gpio.c
index 0da5f00..f3b9dea 100644
--- a/arch/blackfin/mach-bf548/gpio.c
+++ b/arch/blackfin/mach-bf548/gpio.c
@@ -49,6 +49,9 @@ static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+char *str_ident = NULL;
+
+#define RESOURCE_LABEL_SIZE 16
inline int check_gpio(unsigned short gpio)
{
@@ -70,7 +73,6 @@ inline void portmux_setup(unsigned short portno, unsigned short function)
pmux |= (function & 0x3) << (2 * gpio_sub_n(portno));
gpio_array[gpio_bank(portno)]->port_mux = pmux;
-
}
inline u16 get_portmux(unsigned short portno)
@@ -80,16 +82,11 @@ inline u16 get_portmux(unsigned short portno)
pmux = gpio_array[gpio_bank(portno)]->port_mux;
return (pmux >> (2 * gpio_sub_n(portno)) & 0x3);
-
}
static void port_setup(unsigned short gpio, unsigned short usage)
{
if (usage == GPIO_USAGE) {
- if (gpio_array[gpio_bank(gpio)]->port_fer & gpio_bit(gpio))
- printk(KERN_WARNING
- "bfin-gpio: Possible Conflict with Peripheral "
- "usage and GPIO %d detected!\n", gpio);
gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
} else
gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
@@ -98,6 +95,11 @@ static void port_setup(unsigned short gpio, unsigned short usage)
static int __init bfin_gpio_init(void)
{
+
+ str_ident = kzalloc(RESOURCE_LABEL_SIZE * 256, GFP_KERNEL);
+ if (!str_ident)
+ return -ENOMEM;
+
printk(KERN_INFO "Blackfin GPIO Controller\n");
return 0;
@@ -105,11 +107,47 @@ static int __init bfin_gpio_init(void)
arch_initcall(bfin_gpio_init);
+static void set_label(unsigned short ident, const char *label)
+{
+
+ if (label && str_ident) {
+ strncpy(str_ident + ident * RESOURCE_LABEL_SIZE, label,
+ RESOURCE_LABEL_SIZE);
+ str_ident[ident * RESOURCE_LABEL_SIZE +
+ RESOURCE_LABEL_SIZE - 1] = 0;
+ }
+}
+
+static char *get_label(unsigned short ident)
+{
+ if (!str_ident)
+ return "UNKNOWN";
+
+ return (str_ident[ident * RESOURCE_LABEL_SIZE] ?
+ (str_ident + ident * RESOURCE_LABEL_SIZE) : "UNKNOWN");
+}
+
+static int cmp_label(unsigned short ident, const char *label)
+{
+ if (label && str_ident)
+ return strncmp(str_ident + ident * RESOURCE_LABEL_SIZE,
+ label, strlen(label));
+ else
+ return -EINVAL;
+}
+
int peripheral_request(unsigned short per, const char *label)
{
unsigned long flags;
unsigned short ident = P_IDENT(per);
+ /*
+ * Don't cares are pins with only one dedicated function
+ */
+
+ if (per & P_DONTCARE)
+ return 0;
+
if (!(per & P_DEFINED))
return -ENODEV;
@@ -120,8 +158,8 @@ int peripheral_request(unsigned short per, const char *label)
if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
printk(KERN_ERR
- "%s: Peripheral %d is already reserved as GPIO!\n",
- __FUNCTION__, per);
+ "%s: Peripheral %d is already reserved as GPIO by %s !\n",
+ __FUNCTION__, ident, get_label(ident));
dump_stack();
local_irq_restore(flags);
return -EBUSY;
@@ -131,22 +169,38 @@ int peripheral_request(unsigned short per, const char *label)
u16 funct = get_portmux(ident);
+ /*
+ * Pin functions like AMC address strobes my
+ * be requested and used by several drivers
+ */
+
if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) {
+
+ /*
+ * Allow that the identical pin function can
+ * be requested from the same driver twice
+ */
+
+ if (cmp_label(ident, label) == 0)
+ goto anyway;
+
printk(KERN_ERR
- "%s: Peripheral %d is already reserved!\n",
- __FUNCTION__, per);
+ "%s: Peripheral %d function %d is already reserved by %s !\n",
+ __FUNCTION__, ident, P_FUNCT2MUX(per), get_label(ident));
dump_stack();
local_irq_restore(flags);
return -EBUSY;
}
}
+anyway:
reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
portmux_setup(ident, P_FUNCT2MUX(per));
port_setup(ident, PERIPHERAL_USAGE);
local_irq_restore(flags);
+ set_label(ident, label);
return 0;
}
@@ -154,16 +208,22 @@ EXPORT_SYMBOL(peripheral_request);
int peripheral_request_list(unsigned short per[], const char *label)
{
-
u16 cnt;
int ret;
for (cnt = 0; per[cnt] != 0; cnt++) {
+
ret = peripheral_request(per[cnt], label);
- if (ret < 0)
- return ret;
+
+ if (ret < 0) {
+ for ( ; cnt > 0; cnt--) {
+ peripheral_free(per[cnt - 1]);
+ }
+ return ret;
+ }
}
+
return 0;
}
EXPORT_SYMBOL(peripheral_request_list);
@@ -173,6 +233,9 @@ void peripheral_free(unsigned short per)
unsigned long flags;
unsigned short ident = P_IDENT(per);
+ if (per & P_DONTCARE)
+ return;
+
if (!(per & P_DEFINED))
return;
@@ -182,8 +245,6 @@ void peripheral_free(unsigned short per)
local_irq_save(flags);
if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) {
- printk(KERN_ERR "bfin-gpio: Peripheral %d wasn't reserved!\n", per);
- dump_stack();
local_irq_restore(flags);
return;
}
@@ -234,7 +295,8 @@ int gpio_request(unsigned short gpio, const char *label)
local_irq_save(flags);
if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
+ printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
+ gpio, get_label(gpio));
dump_stack();
local_irq_restore(flags);
return -EBUSY;
@@ -242,7 +304,8 @@ int gpio_request(unsigned short gpio, const char *label)
if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
printk(KERN_ERR
- "bfin-gpio: GPIO %d is already reserved as Peripheral!\n", gpio);
+ "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
+ gpio, get_label(gpio));
dump_stack();
local_irq_restore(flags);
return -EBUSY;
@@ -253,6 +316,7 @@ int gpio_request(unsigned short gpio, const char *label)
local_irq_restore(flags);
port_setup(gpio, GPIO_USAGE);
+ set_label(gpio, label);
return 0;
}
diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c
index 660f881..d5d9e57 100644
--- a/arch/blackfin/mach-common/ints-priority-dc.c
+++ b/arch/blackfin/mach-common/ints-priority-dc.c
@@ -221,7 +221,7 @@ static unsigned int bf561_gpio_irq_startup(unsigned int irq)
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
@@ -261,7 +261,7 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type)
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c
index 4708023..505b948 100644
--- a/arch/blackfin/mach-common/ints-priority-sc.c
+++ b/arch/blackfin/mach-common/ints-priority-sc.c
@@ -343,7 +343,7 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
u16 gpionr = irq - IRQ_PF0;
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
@@ -377,7 +377,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
@@ -587,7 +587,7 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
}
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
@@ -627,7 +627,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index 48587c2..05a5b3f 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -1,17 +1,20 @@
/*
- * File: drivers/spi/bfin5xx_spi.c
- * Based on: N/A
- * Author: Luke Yang (Analog Devices Inc.)
+ * File: drivers/spi/bfin5xx_spi.c
+ * Maintainer:
+ * Bryan Wu <[email protected]>
+ * Original Author:
+ * Luke Yang (Analog Devices Inc.)
*
- * Created: March. 10th 2006
- * Description: SPI controller driver for Blackfin 5xx
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * Created: March. 10th 2006
+ * Description: SPI controller driver for Blackfin BF5xx
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Modified:
* March 10, 2006 bfin5xx_spi.c Created. (Luke Yang)
* August 7, 2006 added full duplex mode (Axel Weiss & Luke Yang)
+ * July 17, 2007 add support for BF54x SPI0 controller (Bryan Wu)
*
- * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2004-2007 Analog Devices Inc.
*
* This program is free software ; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -31,28 +34,27 @@
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/io.h>
#include <linux/ioport.h>
+#include <linux/irq.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/workqueue.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
#include <asm/dma.h>
-
+#include <asm/portmux.h>
#include <asm/bfin5xx_spi.h>
-MODULE_AUTHOR("Luke Yang");
-MODULE_DESCRIPTION("Blackfin 5xx SPI Contoller");
+MODULE_AUTHOR("Bryan Wu, Luke Yang");
+MODULE_DESCRIPTION("Blackfin BF5xx SPI Contoller Driver");
MODULE_LICENSE("GPL");
+#define DRV_NAME "bfin-spi-master"
#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
#define DEFINE_SPI_REG(reg, off) \
@@ -125,6 +127,7 @@ struct chip_data {
u16 flag;
u8 chip_select_num;
+ u8 chip_select_requested;
u8 n_bytes;
u8 width; /* 0 or 1 */
u8 enable_dma;
@@ -189,53 +192,37 @@ static void restore_state(struct driver_data *drv_data)
bfin_spi_disable(drv_data);
dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n");
-#if defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
- dev_dbg(&drv_data->pdev->dev,
- "chip select number is %d\n", chip->chip_select_num);
-
- switch (chip->chip_select_num) {
- case 1:
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3c00);
- SSYNC();
- break;
+ if (!chip->chip_select_requested) {
- case 2:
- case 3:
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PJSE_SPI);
- SSYNC();
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3800);
- SSYNC();
- break;
-
- case 4:
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS4E_SPI);
- SSYNC();
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3840);
- SSYNC();
- break;
-
- case 5:
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS5E_SPI);
- SSYNC();
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3820);
- SSYNC();
- break;
+ dev_dbg(&drv_data->pdev->dev,
+ "chip select number is %d\n", chip->chip_select_num);
- case 6:
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS6E_SPI);
- SSYNC();
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3810);
- SSYNC();
- break;
+ switch (chip->chip_select_num) {
+ case 1:
+ peripheral_request(P_SPI0_SSEL1, DRV_NAME);
+ break;
+ case 2:
+ peripheral_request(P_SPI0_SSEL2, DRV_NAME);
+ break;
+ case 3:
+ peripheral_request(P_SPI0_SSEL3, DRV_NAME);
+ break;
+ case 4:
+ peripheral_request(P_SPI0_SSEL4, DRV_NAME);
+ break;
+ case 5:
+ peripheral_request(P_SPI0_SSEL5, DRV_NAME);
+ break;
+ case 6:
+ peripheral_request(P_SPI0_SSEL6, DRV_NAME);
+ break;
+ case 7:
+ peripheral_request(P_SPI0_SSEL7, DRV_NAME);
+ break;
+ }
- case 7:
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PJCE_SPI);
- SSYNC();
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3800);
- SSYNC();
- break;
+ chip->chip_select_requested = 1;
}
-#endif
/* Load the registers */
write_CTRL(chip->ctl_reg);
@@ -278,7 +265,7 @@ static void null_reader(struct driver_data *drv_data)
static void u8_writer(struct driver_data *drv_data)
{
- dev_dbg(&drv_data->pdev->dev,
+ dev_dbg(&drv_data->pdev->dev,
"cr8-s is 0x%x\n", read_STAT());
while (drv_data->tx < drv_data->tx_end) {
write_TDBR(*(u8 *) (drv_data->tx));
@@ -317,7 +304,7 @@ static void u8_cs_chg_writer(struct driver_data *drv_data)
static void u8_reader(struct driver_data *drv_data)
{
- dev_dbg(&drv_data->pdev->dev,
+ dev_dbg(&drv_data->pdev->dev,
"cr-8 is 0x%x\n", read_STAT());
/* clear TDBR buffer before read(else it will be shifted out) */
@@ -404,7 +391,7 @@ static void u8_cs_chg_duplex(struct driver_data *drv_data)
static void u16_writer(struct driver_data *drv_data)
{
- dev_dbg(&drv_data->pdev->dev,
+ dev_dbg(&drv_data->pdev->dev,
"cr16 is 0x%x\n", read_STAT());
while (drv_data->tx < drv_data->tx_end) {
@@ -817,7 +804,7 @@ static void pump_transfers(unsigned long data)
/* full duplex mode */
BUG_ON((drv_data->tx_end - drv_data->tx) !=
(drv_data->rx_end - drv_data->rx));
- cr = (read_CTRL() & (~BIT_CTL_TIMOD));
+ cr = (read_CTRL() & (~BIT_CTL_TIMOD));
cr |= CFG_SPI_WRITE | (width << 8) |
(CFG_SPI_ENABLE << 14);
dev_dbg(&drv_data->pdev->dev,
@@ -835,7 +822,7 @@ static void pump_transfers(unsigned long data)
cr = (read_CTRL() & (~BIT_CTL_TIMOD));
cr |= CFG_SPI_WRITE | (width << 8) |
(CFG_SPI_ENABLE << 14);
- dev_dbg(&drv_data->pdev->dev,
+ dev_dbg(&drv_data->pdev->dev,
"IO write: cr is 0x%x\n", cr);
write_CTRL(cr);
@@ -850,7 +837,7 @@ static void pump_transfers(unsigned long data)
cr = (read_CTRL() & (~BIT_CTL_TIMOD));
cr |= CFG_SPI_READ | (width << 8) |
(CFG_SPI_ENABLE << 14);
- dev_dbg(&drv_data->pdev->dev,
+ dev_dbg(&drv_data->pdev->dev,
"IO read: cr is 0x%x\n", cr);
write_CTRL(cr);
@@ -862,7 +849,7 @@ static void pump_transfers(unsigned long data)
}
if (!tranf_success) {
- dev_dbg(&drv_data->pdev->dev,
+ dev_dbg(&drv_data->pdev->dev,
"IO write error!\n");
message->state = ERROR_STATE;
} else {
@@ -917,8 +904,8 @@ static void pump_messages(struct work_struct *work)
"got a message to pump, state is set to: baud %d, flag 0x%x, ctl 0x%x\n",
drv_data->cur_chip->baud, drv_data->cur_chip->flag,
drv_data->cur_chip->ctl_reg);
-
- dev_dbg(&drv_data->pdev->dev,
+
+ dev_dbg(&drv_data->pdev->dev,
"the first transfer len is %d\n",
drv_data->cur_transfer->len);
@@ -1178,6 +1165,22 @@ static inline int destroy_queue(struct driver_data *drv_data)
return 0;
}
+static int setup_pin_mux(int action)
+{
+
+ u16 pin_req[] = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0};
+
+ if (action) {
+ if (peripheral_request_list(pin_req, DRV_NAME)) {
+ return -EFAULT;
+ }
+ } else {
+ peripheral_free_list(pin_req);
+ }
+
+ return 0;
+}
+
static int __init bfin5xx_spi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1194,6 +1197,12 @@ static int __init bfin5xx_spi_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "can not alloc spi_master\n");
return -ENOMEM;
}
+
+ if (setup_pin_mux(1)) {
+ dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
+ goto out_error;
+ }
+
drv_data = spi_master_get_devdata(master);
drv_data->master = master;
drv_data->master_info = platform_info;
@@ -1227,9 +1236,11 @@ static int __init bfin5xx_spi_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "controller probe successfully\n");
return status;
- out_error_queue_alloc:
+out_error_queue_alloc:
destroy_queue(drv_data);
+out_error:
spi_master_put(master);
+
return status;
}
@@ -1259,6 +1270,8 @@ static int __devexit bfin5xx_spi_remove(struct platform_device *pdev)
/* Disconnect from the SPI framework */
spi_unregister_master(drv_data->master);
+ setup_pin_mux(0);
+
/* Prevent double remove */
platform_set_drvdata(pdev, NULL);
diff --git a/include/asm-blackfin/bfin5xx_spi.h b/include/asm-blackfin/bfin5xx_spi.h
index 95c1c95..8b211ff 100644
--- a/include/asm-blackfin/bfin5xx_spi.h
+++ b/include/asm-blackfin/bfin5xx_spi.h
@@ -150,6 +150,12 @@
#define CFG_SPI_CS6VALUE 6
#define CFG_SPI_CS7VALUE 7
+#if defined(CONFIG_BF54x)
+#define CH_SPI CH_SPI0
+#define bfin_read_SPI_STAT bfin_read_SPI0_STAT
+#endif
+
+
/* device.platform_data for SSP controller devices */
struct bfin5xx_spi_master {
u16 num_chipselect;
diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h
index 7480cfa..dd203cd 100644
--- a/include/asm-blackfin/gpio.h
+++ b/include/asm-blackfin/gpio.h
@@ -144,6 +144,24 @@
#ifdef BF533_FAMILY
#define MAX_BLACKFIN_GPIOS 16
+
+#define GPIO_PF0 0
+#define GPIO_PF1 1
+#define GPIO_PF2 2
+#define GPIO_PF3 3
+#define GPIO_PF4 4
+#define GPIO_PF5 5
+#define GPIO_PF6 6
+#define GPIO_PF7 7
+#define GPIO_PF8 8
+#define GPIO_PF9 9
+#define GPIO_PF10 10
+#define GPIO_PF11 11
+#define GPIO_PF12 12
+#define GPIO_PF13 13
+#define GPIO_PF14 14
+#define GPIO_PF15 15
+
#endif
#ifdef BF537_FAMILY
@@ -421,6 +439,19 @@ unsigned short gpio_get_value(unsigned short gpio);
void gpio_direction_input(unsigned short gpio);
void gpio_direction_output(unsigned short gpio);
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+#include <asm/irq.h>
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return (gpio + GPIO_IRQ_BASE);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return (irq - GPIO_IRQ_BASE);
+}
+
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BLACKFIN_GPIO_H__ */
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index e043caf..69b9f8e 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -1,5 +1,6 @@
#include <linux/serial.h>
#include <asm/dma.h>
+#include <asm/portmux.h>
#define NR_PORTS 1
@@ -92,18 +93,24 @@ struct bfin_serial_res bfin_serial_resource[] = {
}
};
+#define DRIVER_NAME "bfin-uart"
int nr_ports = NR_PORTS;
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ peripheral_request(P_UART0_TX, DRIVER_NAME);
+ peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0) {
- gpio_request(uart->cts_pin, NULL);
+ gpio_request(uart->cts_pin, DRIVER_NAME);
gpio_direction_input(uart->cts_pin);
}
if (uart->rts_pin >= 0) {
- gpio_request(uart->rts_pin, NULL);
+ gpio_request(uart->rts_pin, DRIVER_NAME);
gpio_direction_input(uart->rts_pin);
}
#endif
diff --git a/include/asm-blackfin/mach-bf533/blackfin.h b/include/asm-blackfin/mach-bf533/blackfin.h
index e438449..f3b240a 100644
--- a/include/asm-blackfin/mach-bf533/blackfin.h
+++ b/include/asm-blackfin/mach-bf533/blackfin.h
@@ -38,7 +38,7 @@
#include "defBF532.h"
#include "anomaly.h"
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
#include "cdefBF532.h"
#endif
diff --git a/include/asm-blackfin/mach-bf533/irq.h b/include/asm-blackfin/mach-bf533/irq.h
index 9879e68..452fb82 100644
--- a/include/asm-blackfin/mach-bf533/irq.h
+++ b/include/asm-blackfin/mach-bf533/irq.h
@@ -128,6 +128,8 @@ Core Emulation **
#define IRQ_PF14 47
#define IRQ_PF15 48
+#define GPIO_IRQ_BASE IRQ_PF0
+
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PF15+1)
#else
diff --git a/include/asm-blackfin/mach-bf533/portmux.h b/include/asm-blackfin/mach-bf533/portmux.h
index b88d7a0..137f488 100644
--- a/include/asm-blackfin/mach-bf533/portmux.h
+++ b/include/asm-blackfin/mach-bf533/portmux.h
@@ -42,7 +42,7 @@
#define P_SPORT0_DRPRI (P_DONTCARE)
#define P_SPI0_MOSI (P_DONTCARE)
-#define P_SPI0_MIS0 (P_DONTCARE)
+#define P_SPI0_MISO (P_DONTCARE)
#define P_SPI0_SCK (P_DONTCARE)
#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF7))
#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF6))
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index 8f5d9c4..6fb328f 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -1,5 +1,6 @@
#include <linux/serial.h>
#include <asm/dma.h>
+#include <asm/portmux.h>
#define NR_PORTS 2
@@ -122,25 +123,29 @@ struct bfin_serial_res bfin_serial_resource[] = {
int nr_ports = ARRAY_SIZE(bfin_serial_resource);
+#define DRIVER_NAME "bfin-uart"
+
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
- unsigned short val;
- val = bfin_read16(BFIN_PORT_MUX);
- val &= ~(PFDE | PFTE);
- bfin_write16(BFIN_PORT_MUX, val);
- val = bfin_read16(PORTF_FER);
- val |= 0xF;
- bfin_write16(PORTF_FER, val);
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ peripheral_request(P_UART0_TX, DRIVER_NAME);
+ peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ peripheral_request(P_UART1_TX, DRIVER_NAME);
+ peripheral_request(P_UART1_RX, DRIVER_NAME);
+#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0) {
- gpio_request(uart->cts_pin, NULL);
+ gpio_request(uart->cts_pin, DRIVER_NAME);
gpio_direction_input(uart->cts_pin);
}
if (uart->rts_pin >= 0) {
- gpio_request(uart->rts_pin, NULL);
+ gpio_request(uart->rts_pin, DRIVER_NAME);
gpio_direction_output(uart->rts_pin);
}
#endif
diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/include/asm-blackfin/mach-bf537/blackfin.h
index bbd9705..f196588 100644
--- a/include/asm-blackfin/mach-bf537/blackfin.h
+++ b/include/asm-blackfin/mach-bf537/blackfin.h
@@ -43,7 +43,7 @@
#include "defBF537.h"
#endif
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
#include "cdefBF534.h"
/* UART 0*/
diff --git a/include/asm-blackfin/mach-bf537/irq.h b/include/asm-blackfin/mach-bf537/irq.h
index 8af2a83..36c44bc 100644
--- a/include/asm-blackfin/mach-bf537/irq.h
+++ b/include/asm-blackfin/mach-bf537/irq.h
@@ -160,6 +160,8 @@ Core Emulation **
#define IRQ_PH14 96
#define IRQ_PH15 97
+#define GPIO_IRQ_BASE IRQ_PF0
+
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PH15+1)
#else
diff --git a/include/asm-blackfin/mach-bf537/portmux.h b/include/asm-blackfin/mach-bf537/portmux.h
index 23e13c5..ae6c53b 100644
--- a/include/asm-blackfin/mach-bf537/portmux.h
+++ b/include/asm-blackfin/mach-bf537/portmux.h
@@ -106,4 +106,37 @@
#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(2))
-#endif /* _MACH_PORTMUX_H_ */
+#define P_MII0 {\
+ P_MII0_ETxD0, \
+ P_MII0_ETxD1, \
+ P_MII0_ETxD2, \
+ P_MII0_ETxD3, \
+ P_MII0_ETxEN, \
+ P_MII0_TxCLK, \
+ P_MII0_PHYINT, \
+ P_MII0_COL, \
+ P_MII0_ERxD0, \
+ P_MII0_ERxD1, \
+ P_MII0_ERxD2, \
+ P_MII0_ERxD3, \
+ P_MII0_ERxDV, \
+ P_MII0_ERxCLK, \
+ P_MII0_ERxER, \
+ P_MII0_CRS, \
+ P_MDC, \
+ P_MDIO, 0}
+
+
+#define P_RMII0 {\
+ P_MII0_ETxD0, \
+ P_MII0_ETxD1, \
+ P_MII0_ETxEN, \
+ P_MII0_ERxD0, \
+ P_MII0_ERxD1, \
+ P_MII0_ERxER, \
+ P_RMII0_REF_CLK, \
+ P_RMII0_MDINT, \
+ P_RMII0_CRS_DV, \
+ P_MDC, \
+ P_MDIO, 0}
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 2f4afc9..f21a162 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -1,5 +1,6 @@
#include <linux/serial.h>
#include <asm/dma.h>
+#include <asm/portmux.h>
#define NR_PORTS 4
@@ -143,50 +144,48 @@ struct bfin_serial_res bfin_serial_resource[] = {
int nr_ports = ARRAY_SIZE(bfin_serial_resource);
+#define DRIVER_NAME "bfin-uart"
+
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
#ifdef CONFIG_SERIAL_BFIN_UART0
- /* Enable UART0 RX and TX on pin 7 & 8 of PORT E */
- bfin_write_PORTE_FER(0x180 | bfin_read_PORTE_FER());
- bfin_write_PORTE_MUX(0x3C000 | bfin_read_PORTE_MUX());
+ peripheral_request(P_UART0_TX, DRIVER_NAME);
+ peripheral_request(P_UART0_RX, DRIVER_NAME);
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
- /* Enable UART1 RX and TX on pin 0 & 1 of PORT H */
- bfin_write_PORTH_FER(0x3 | bfin_read_PORTH_FER());
- bfin_write_PORTH_MUX(~0xF & bfin_read_PORTH_MUX());
+ peripheral_request(P_UART1_TX, DRIVER_NAME);
+ peripheral_request(P_UART1_RX, DRIVER_NAME);
+
#ifdef CONFIG_BFIN_UART1_CTSRTS
- /* Enable UART1 RTS and CTS on pin 9 & 10 of PORT E */
- bfin_write_PORTE_FER(0x600 | bfin_read_PORTE_FER());
- bfin_write_PORTE_MUX(~0x3C0000 & bfin_read_PORTE_MUX());
+ peripheral_request(P_UART1_RTS, DRIVER_NAME);
+ peripheral_request(P_UART1_CTS DRIVER_NAME);
#endif
#endif
#ifdef CONFIG_SERIAL_BFIN_UART2
- /* Enable UART2 RX and TX on pin 4 & 5 of PORT B */
- bfin_write_PORTB_FER(0x30 | bfin_read_PORTB_FER());
- bfin_write_PORTB_MUX(~0xF00 & bfin_read_PORTB_MUX());
+ peripheral_request(P_UART2_TX, DRIVER_NAME);
+ peripheral_request(P_UART2_RX, DRIVER_NAME);
#endif
#ifdef CONFIG_SERIAL_BFIN_UART3
- /* Enable UART3 RX and TX on pin 6 & 7 of PORT B */
- bfin_write_PORTB_FER(0xC0 | bfin_read_PORTB_FER());
- bfin_write_PORTB_MUX(~0xF000 | bfin_read_PORTB_MUX());
+ peripheral_request(P_UART3_TX, DRIVER_NAME);
+ peripheral_request(P_UART3_RX, DRIVER_NAME);
+
#ifdef CONFIG_BFIN_UART3_CTSRTS
- /* Enable UART3 RTS and CTS on pin 2 & 3 of PORT B */
- bfin_write_PORTB_FER(0xC | bfin_read_PORTB_FER());
- bfin_write_PORTB_MUX(~0xF0 | bfin_read_PORTB_MUX());
+ peripheral_request(P_UART3_RTS, DRIVER_NAME);
+ peripheral_request(P_UART3_CTS DRIVER_NAME);
#endif
#endif
SSYNC();
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0) {
- gpio_request(uart->cts_pin, NULL);
+ gpio_request(uart->cts_pin, DRIVER_NAME);
gpio_direction_input(uart->cts_pin);
}
if (uart->rts_pin >= 0) {
- gpio_request(uart->rts_pin, NULL);
+ gpio_request(uart->rts_pin, DRIVER_NAME);
gpio_direction_output(uart->rts_pin);
}
#endif
diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/include/asm-blackfin/mach-bf548/blackfin.h
index 791218f..19e84dd 100644
--- a/include/asm-blackfin/mach-bf548/blackfin.h
+++ b/include/asm-blackfin/mach-bf548/blackfin.h
@@ -54,7 +54,7 @@
#include "defBF549.h"
#endif
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
#ifdef CONFIG_BF542
#include "cdefBF542.h"
#endif
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h
index 895ddd4..56f0a76 100644
--- a/include/asm-blackfin/mach-bf548/defBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h
@@ -1637,8 +1637,25 @@
#define RESTART 0x20 /* Work Unit Transitions */
#define DI_SEL 0x40 /* Data Interrupt Timing Select */
#define DI_EN 0x80 /* Data Interrupt Enable */
+
#define NDSIZE 0xf00 /* Flex Descriptor Size */
+#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
+#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
+#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
+#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
+#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
+#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
+#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
+#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
+#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
+
#define DMAFLOW 0xf000 /* Next Operation */
+#define DMAFLOW_STOP 0x0000 /* Stop Mode */
+#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
+#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
+#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
/* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
diff --git a/include/asm-blackfin/mach-bf548/gpio.h b/include/asm-blackfin/mach-bf548/gpio.h
index dbf66bc..cb8b0f1 100644
--- a/include/asm-blackfin/mach-bf548/gpio.h
+++ b/include/asm-blackfin/mach-bf548/gpio.h
@@ -209,8 +209,3 @@ struct gpio_port_t {
unsigned short dummy7;
unsigned int port_mux;
};
-
-int gpio_request(unsigned short gpio, const char *label);
-void peripheral_free(unsigned short per);
-int peripheral_request_list(unsigned short per[], const char *label);
-void peripheral_free_list(unsigned short per[]);
diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h
index e548d3c..21f06f7 100644
--- a/include/asm-blackfin/mach-bf548/irq.h
+++ b/include/asm-blackfin/mach-bf548/irq.h
@@ -337,6 +337,8 @@ Events (highest priority) EMU 0
#define IRQ_PJ14 BFIN_PJ_IRQ(14) /* N/A */
#define IRQ_PJ15 BFIN_PJ_IRQ(15) /* N/A */
+#define GPIO_IRQ_BASE IRQ_PA0
+
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PJ15+1)
#else
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
index e043caf..69b9f8e 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -1,5 +1,6 @@
#include <linux/serial.h>
#include <asm/dma.h>
+#include <asm/portmux.h>
#define NR_PORTS 1
@@ -92,18 +93,24 @@ struct bfin_serial_res bfin_serial_resource[] = {
}
};
+#define DRIVER_NAME "bfin-uart"
int nr_ports = NR_PORTS;
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ peripheral_request(P_UART0_TX, DRIVER_NAME);
+ peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0) {
- gpio_request(uart->cts_pin, NULL);
+ gpio_request(uart->cts_pin, DRIVER_NAME);
gpio_direction_input(uart->cts_pin);
}
if (uart->rts_pin >= 0) {
- gpio_request(uart->rts_pin, NULL);
+ gpio_request(uart->rts_pin, DRIVER_NAME);
gpio_direction_input(uart->rts_pin);
}
#endif
diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/include/asm-blackfin/mach-bf561/blackfin.h
index 2537c84..562aee3 100644
--- a/include/asm-blackfin/mach-bf561/blackfin.h
+++ b/include/asm-blackfin/mach-bf561/blackfin.h
@@ -38,7 +38,7 @@
#include "defBF561.h"
#include "anomaly.h"
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
#include "cdefBF561.h"
#endif
diff --git a/include/asm-blackfin/mach-bf561/irq.h b/include/asm-blackfin/mach-bf561/irq.h
index a753ce7..1278992 100644
--- a/include/asm-blackfin/mach-bf561/irq.h
+++ b/include/asm-blackfin/mach-bf561/irq.h
@@ -289,6 +289,8 @@
#define IRQ_PF46 119
#define IRQ_PF47 120
+#define GPIO_IRQ_BASE IRQ_PF0
+
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PF47 + 1)
#else
diff --git a/include/asm-blackfin/portmux.h b/include/asm-blackfin/portmux.h
index 9d3681e..d1bcd91 100644
--- a/include/asm-blackfin/portmux.h
+++ b/include/asm-blackfin/portmux.h
@@ -14,6 +14,12 @@
#define P_MAYSHARE 0x2000
#define P_DONTCARE 0x1000
+
+int peripheral_request(unsigned short per, const char *label);
+void peripheral_free(unsigned short per);
+int peripheral_request_list(unsigned short per[], const char *label);
+void peripheral_free_list(unsigned short per[]);
+
#include <asm/gpio.h>
#include <asm/mach/portmux.h>
@@ -513,6 +519,22 @@
#define P_SPI0_SSEL3 P_UNDEF
#endif
+#ifndef P_SPI0_SSEL4
+#define P_SPI0_SSEL4 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL5
+#define P_SPI0_SSEL5 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL6
+#define P_SPI0_SSEL6 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL7
+#define P_SPI0_SSEL7 P_UNDEF
+#endif
+
#ifndef P_UART0_TX
#define P_UART0_TX P_UNDEF
#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
