I wrote:
> Now that I booted from 2.6.22-rc5 to 2.6.23-rc2 I noticed that ksensors
> displayed 1/16 of the actual speed of the CPU fan (correct is ca. 1400
> RPM under light load) and 0 for the case fan (correct is ca. 480 RPM
> under light load).
>
> I reverted patch
> hwmon/w83627ehf: No need to initialize fan_min
> and the behaviour changed as follows: ksensors displays the correct CPU
> fan speed when loaded for the first time after the w83627ehf was loaded,
> then drops to 1/16th the next time it refreshes the display. (I
> configured 30s update interval in ksensors.) But the case fan's speed
> is now correctly displayed all the time. Ksensors' fan speed
> multipliers are configured as 1.
...
> Booting back into 2.6.22-rc5 (which seems identical with 2.6.22 as far
> as w83627ehf is concerned) brings back the correct fan speeds.
PS: The actual behavior under 2.6.22-rc5 is that the CPU fan speed is
displayed correctly from the start, while the case fan speed is
initially shown as 0 but jumps to the correct speed after ksensors'
first display update.
--
Stefan Richter
-=====-=-=== =--- --=-=
http://arcgraph.de/sr/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
