(Adding Cc: linuxppc-dev, olh)
Robert Hancock wrote:
> Stefan Richter wrote:
>> Date: Wed, 1 Aug 2007 20:30:36 +0200 (CEST)
>> From: Stefan Richter <[email protected]>
>> Subject: ieee1394: revert "sbp2: enforce 32bit DMA mapping"
>>
>> Revert commit 0555659d63c285ceb7ead3115532e1b71b0f27a7 from 2.6.22-rc1.
>> The dma_set_mask call somehow failed on a PowerMac G5, PPC64:
>> http://lkml.org/lkml/2007/8/1/344
>>
>> Should there ever occur a DMA mapping beyond the physical DMA range, a
>> proper SBP-2 firmware will report transport errors. So let's leave it
>> at that.
>
> Isn't this a rather poor workaround? All this means is that if we fail
> to set a 32-bit DMA mask, we're likely to blow up at runtime instead of
> at initialization time, when we get a DMA mapping over 4GB.
I generally agree with you. But since I actually never heard of
problems that could directly be related to sbp2's DMA areas exceeding
the OHCI-1394 physical DMA range (4GB in most OHCI-1394
implementations), I consider this simple reversion good enough for post
2.6.23-rc1 and especially for 2.6.22.y.
My original commit 0555659.. was a violation of "If it ain't (known)
broken, don't fix it".
> If setting 32-bit DMA mask fails on ppc64, that sounds like a problem
> with the DMA implementation on that architecture. There are enough cards
> out there that only support 32-bit DMA that this really needs to work..
Yes, could the PPC folks please have a look at it? Thanks.
>> Signed-off-by: Stefan Richter <[email protected]>
>> Tested-by: Olaf Hering <[email protected]>
>> ---
>> Same as commit a9c2f18800753c82c45fc13b27bdc148849bdbb2.
>>
>> drivers/ieee1394/sbp2.c | 5 -----
>> 1 file changed, 5 deletions(-)
>>
>> Index: linux-2.6.22/drivers/ieee1394/sbp2.c
>> ===================================================================
>> --- linux-2.6.22.orig/drivers/ieee1394/sbp2.c
>> +++ linux-2.6.22/drivers/ieee1394/sbp2.c
>> @@ -774,11 +774,6 @@ static struct sbp2_lu *sbp2_alloc_device
>> SBP2_ERR("failed to register lower 4GB address range");
>> goto failed_alloc;
>> }
>> -#else
>> - if (dma_set_mask(hi->host->device.parent, DMA_32BIT_MASK)) {
>> - SBP2_ERR("failed to set 4GB DMA mask");
>> - goto failed_alloc;
>> - }
>> #endif
>> }
>>
--
Stefan Richter
-=====-=-=== =--- --=--
http://arcgraph.de/sr/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]