Re: 2.6.22 regression: thermal trip points

["Renato S. Yamane" <renatoyamane@mandic.com.br>]

Len Brown escreveu:
> On Thursday 02 August 2007 04:40, Knut Petersen wrote:
> > mainboard: AOpen i915GMm-hfs, AWARD BIOS
> > cpu: Pentium-M 750 (0.8 to 1.86 MHz)
> > openSuSE 10.2 with kernel 2.6.22.1
> >
> > The cpu fan can not be controled by linux kernel.
> > The BIOS will switch on the cpu fan a bit above 50 deg. Celsius.
> > The active and passive trip points both are set to 50 deg. Celsius.
> > Temperature of the idle cpu at 800 Mhz: 34 to 42 deg. C.
> > The BIOS never changes the trip points.
> > Cpufreq does work perfectly.

On my Toshiba M45-S355 (Toshiba Bios, Pentium M 750 - 0.8 at 1.86GHz, 
Debian Etch) I see the same using Kernel 2.6.21.6

> > Previously there was the possibility  to add something like
> >
> > echo  "100:0:65:70:0" > /proc/acpi/thermal_zone/THRM/trip_points
> > echo  2 > /proc/acpi/thermal_zone/THRM/polling_frequency
> > echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor

I never do that, but see below (Kernel 2.6.21.6):

cat /proc/acpi/thermal_zone/TZCL/trip_points
critical (S5):           105 C

cat /proc/acpi/thermal_zone/TZCL/polling_frequency
polling frequency:       2 seconds

cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
ondemand

Regards,
Renato S. Yamane
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/