Bernhard?
cu
Adrian
On Wed, Jul 18, 2007 at 11:33:55PM -0400, pat-lkml wrote:
> I received:
>
> PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0a) (try
> 'pci=assign-busses')
> Please report the result to linux-kernel to fix this permanently
>
> in my dmesg in 2.6.22, and am reporting it. Context of message follows.
> Full dmesg output available on request. This is a Clevo d900t laptop
> motherboard, and everything works perfectly on it.
>
> Pat Erley
>
> --
>
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> Brought up 2 CPUs
> migration_cost=22
> NET: Registered protocol family 16
> EISA bus registered
> ACPI: bus type pci registered
> PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
> PCI: Not using MMCONFIG.
> PCI: PCI BIOS revision 2.10 entry at 0xfd951, last bus=10
> PCI: Using configuration type 1
> Setting up standard PCI resources
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
> PCI quirk: region 1180-11bf claimed by ICH6 GPIO
> PCI: Transparent bridge - 0000:00:1e.0
> PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0a) (try
> 'pci=assign-busses')
> Please report the result to linux-kernel to fix this permanently
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *11
> ACPI: PCI Interrupt Link [LNKB] (IRQs 11) *10
> ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5
> ACPI: PCI Interrupt Link [LNKD] (IRQs 11) *10
> ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
> ACPI: PCI Interrupt Link [LNKF] (IRQs *11)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs *11)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 12 devices
> ACPI: ACPI bus type pnp unregistered
> SCSI subsystem initialized
> libata version 2.21 loaded.
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> Time: tsc clocksource has been installed.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
