Re: [PATCH 1/5 v3] Add the explanation and a sample of RapidIO OF node to the document of booting-without-of.txt file.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Jul 26, 2007, at 3:42 AM, Zhang Wei wrote:

Add the explanation and a sample of RapidIO OF node to the document of booting-without-of.txt file.

Signed-off-by: Zhang Wei <[email protected]>
---
Documentation/powerpc/booting-without-of.txt | 37 +++++++++++++++ +++++++++++
 1 files changed, 37 insertions(+), 0 deletions(-)

diff --git a/Documentation/powerpc/booting-without-of.txt b/ Documentation/powerpc/booting-without-of.txt
index 76733a3..d89b805 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1824,6 +1824,43 @@ platforms are moved over to use the flattened-device-tree model.
 		fsl,has-rstcr;
 	};

+   l) RapidIO
+
+   RapidIO is a definition of a system interconnect. This node add
+   the support for RapidIO processor in kernel. The node name is
+   suggested to be 'rapidio'.
+
+   Required properties:
+
+    - compatible : Using "fsl,rapidio-delta" for Freescale PowerPC
+      RapidIO controller.
+    - #address-cells : Address representation for "rapidio" devices.
+      This field represents the number of cells needed to represent
+      the RapidIO address of the registers.

Can you explain this a little further. I'm a bit confused by 'RapidIO address of the registers'.

+      See 1) above for more details on defining #address-cells.
+    - reg : Offset and length of the register set for the device
+    - ranges : Should be defined as specified in 1) to describe the
+      translation of addresses for memory mapped RapidIO memory
+      space.
+    - interrupts : binding interrupts for this device node,
+      please follow below orders:
+      <err_irq bell_outb_irq bell_inb_irq msg1_tx_irq msg1_rx_irq
+      msg2_tx_irq msg2_rx_irq ... msgN_tx_irq msgN_rx_irq>.
+
+  Example:
+
+	rapidio@c0000 {
+		compatible = "fsl,rapidio-delta";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <c0000 20000>;
+		ranges = <0 0 c0000000 20000000>;
+		interrupt-parent = <&mpic>;
+		/* err_irq bell_outb_irq bell_inb_irq msg1_tx_irq msg1_rx_irq
+						      msg2_tx_irq msg2_rx_irq */
+		interrupts = <30 2 31 2 32 2 35 2 36 2 37 2 38 2>;
+	};
+
    More devices will be defined as this spec matures.

 VII - Specifying interrupt information for devices
--
1.5.1

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux