Hi Linus
Please pull from 'for-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6.git/ for-linus
to receive the following updates:
- Bug fixing, code cleanup, anomaly handling update and GPIO API update.
- Serial, SPI, EMAC and RTC driver updating.
arch/blackfin/Kconfig | 83 ++++-
arch/blackfin/Makefile | 4 +
arch/blackfin/kernel/bfin_gpio.c | 301 +++++++++++--
arch/blackfin/kernel/cplbinit.c | 4 +-
arch/blackfin/kernel/dma-mapping.c | 3 +-
arch/blackfin/kernel/irqchip.c | 9 +
arch/blackfin/kernel/setup.c | 25 +-
arch/blackfin/kernel/traps.c | 55 ++-
arch/blackfin/kernel/vmlinux.lds.S | 16 +-
arch/blackfin/lib/memcmp.S | 2 +-
arch/blackfin/lib/memcpy.S | 2 +-
arch/blackfin/lib/memmove.S | 4 +-
arch/blackfin/mach-bf533/head.S | 24 +-
arch/blackfin/mach-bf537/head.S | 32 +-
arch/blackfin/mach-bf548/Kconfig | 4 +-
arch/blackfin/mach-bf548/boards/ezkit.c | 30 ++
arch/blackfin/mach-bf548/gpio.c | 98 ++++-
arch/blackfin/mach-bf548/head.S | 16 +-
arch/blackfin/mach-bf561/head.S | 35 +-
arch/blackfin/mach-common/cache.S | 8 +-
arch/blackfin/mach-common/cacheinit.S | 9 +-
arch/blackfin/mach-common/cplbmgr.S | 54 ++--
arch/blackfin/mach-common/dpmc.S | 52 ++--
arch/blackfin/mach-common/entry.S | 83 ++++-
arch/blackfin/mach-common/interrupt.S | 6 +-
arch/blackfin/mach-common/ints-priority-dc.c | 43 +-
arch/blackfin/mach-common/ints-priority-sc.c | 56 ++-
arch/blackfin/mach-common/lock.S | 20 +-
arch/blackfin/oprofile/op_blackfin.h | 8 +-
drivers/i2c/busses/Kconfig | 4 +-
drivers/input/serio/Kconfig | 2 +-
drivers/net/bfin_mac.c | 6 +-
drivers/rtc/rtc-bfin.c | 2 +-
drivers/serial/bfin_5xx.c | 14 +-
drivers/spi/spi_bfin5xx.c | 202 ++++-----
include/asm-blackfin/bfin-global.h | 1 +
include/asm-blackfin/bfin5xx_spi.h | 6 +
include/asm-blackfin/blackfin.h | 124 +++---
include/asm-blackfin/gpio.h | 31 ++
include/asm-blackfin/mach-bf533/anomaly.h | 467 ++++++++++----------
include/asm-blackfin/mach-bf533/bf533.h | 2 +-
include/asm-blackfin/mach-bf533/bfin_serial_5xx.h | 11 +-
include/asm-blackfin/mach-bf533/blackfin.h | 2 +-
include/asm-blackfin/mach-bf533/cdefBF532.h | 10 +-
include/asm-blackfin/mach-bf533/irq.h | 2 +
include/asm-blackfin/mach-bf533/portmux.h | 2 +-
include/asm-blackfin/mach-bf537/anomaly.h | 248 ++++++-----
include/asm-blackfin/mach-bf537/bf537.h | 2 +-
include/asm-blackfin/mach-bf537/bfin_serial_5xx.h | 23 +-
include/asm-blackfin/mach-bf537/blackfin.h | 2 +-
include/asm-blackfin/mach-bf537/cdefBF534.h | 4 +-
include/asm-blackfin/mach-bf537/irq.h | 2 +
include/asm-blackfin/mach-bf537/portmux.h | 35 ++-
include/asm-blackfin/mach-bf548/anomaly.h | 130 +++---
include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 39 +-
include/asm-blackfin/mach-bf548/blackfin.h | 2 +-
include/asm-blackfin/mach-bf548/cdefBF54x_base.h | 37 ++-
include/asm-blackfin/mach-bf548/defBF54x_base.h | 17 +
include/asm-blackfin/mach-bf548/gpio.h | 5 -
include/asm-blackfin/mach-bf548/irq.h | 3 +
include/asm-blackfin/mach-bf561/anomaly.h | 409 ++++++++++-------
include/asm-blackfin/mach-bf561/bf561.h | 2 +-
include/asm-blackfin/mach-bf561/bfin_serial_5xx.h | 11 +-
include/asm-blackfin/mach-bf561/blackfin.h | 2 +-
include/asm-blackfin/mach-bf561/cdefBF561.h | 15 +-
include/asm-blackfin/mach-bf561/defBF561.h | 4 +
include/asm-blackfin/mach-bf561/irq.h | 2 +
include/asm-blackfin/mach-common/cdef_LPBlackfin.h | 4 +-
include/asm-blackfin/mach-common/def_LPBlackfin.h | 132 +++---
include/asm-blackfin/portmux.h | 22 +
include/asm-blackfin/system.h | 93 +++--
include/asm-blackfin/thread_info.h | 12 +-
include/asm-blackfin/trace.h | 55 ++-
73 files changed, 2058 insertions(+), 1228 deletions(-)
Bernd Schmidt (3):
Blackfin arch: fix bug which unaligns the init thread's stack and causes the current macro to fail.
Blackfin arch: Initialize the exception vectors early in the boot process
Blackfin arch: Load P0 before storing through it
Bryan Wu (5):
Blackfin arch: fix a compiling warning about dma-mapping
Blackfin arch: bug fixing, add missing BF533_FAMILY GPIO_PFx definition
Blackfin arch: add BF54x I2C/TWI TWI0 driver support
Blackfin SPI driver: Initial supporting BF54x in SPI driver
Blackfin SPI driver update:
Michael Hennerich (14):
Blackfin arch: store labels so we later know who allocated GPIO/Peripheral resources
Blackfin arch: add peripheral resource allocation support
Blackfin arch: Add label to call new GPIO API
Blackfin arch: fix PORT_J BUG for BF537/6 EMAC driver
Blackfin arch: Finalize the generic gpio support - add gpio_to_irq and irq_to_gpio
Blackfin arch: Advertise GENERIC_GPIO and remove duplicated GENERIC_CALIBRATE_DELAY
Blackfin arch: add error message when IRQ no available
Blackfin arch: Add PORT_J.High (needed for BF548-EZkit Touchscreen interrupts) - remove PORT_C.H
Blackfin arch: add missing gpio error handling to make sure we roll back requests in case one fails
Blackfin Ethernet MAC driver: fix bug Report returned -ENOMEM upwards (in case L1/uncached memory alloc fails)
Blackfin serial driver: use new GPIO API
Blackfin SPI driver: Make BF54x SPI work and add support for portmux API
Blackfin SPI driver: use new GPIO API and add error handling
Input Serio: Blackfin doesnt support I8042 - make sure it doesnt get selected
Mike Frysinger (12):
Blackfin arch: cleanup and standardize anomaly.h file format -- no functional changes
Blackfin arch: setup aliases for some core Core A MMRs
Blackfin arch: use bfin_read_SWRST() now that BF561 provides it
Blackfin arch: add selections for BF544 and BF542
Blackfin arch: use HI/LO macros rather than masking the bit ranges ourselves
Blackfin arch: switch to using proper defines this time THREAD_SIZE and PAGE_SIZE instead of just PAGE_SIZE everywhere
Blackfin arch: revise anomaly handling by basing things on the compiler not the kconfig defines
Blackfin arch: scrub remaining ASSEMBLY usage since the switch to __ASSEMBLY__
Blackfin arch: update BF54x anomaly list
Blackfin arch: use the [CS]SYNC() macros which include anomaly workarounds rather than __builtin_bfin_[cs]sync()
Blackfin arch: reorganize headers slightly so we can be sure things are defined early enough
Blackfin On-Chip RTC driver update for supporting BF54x
Robin Getz (1):
Blackfin arch: Add ability to expend the hardware trace buffer
Sonic Zhang (1):
Blackfin arch: fix KGDB bug, dont forget last parameter.
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 017defa..cbc6812 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -57,7 +57,7 @@ config GENERIC_TIME
bool
default n
-config GENERIC_CALIBRATE_DELAY
+config GENERIC_GPIO
bool
default y
@@ -973,8 +973,89 @@ config DEBUG_HUNT_FOR_ZERO
Enabling this option will take up an extra entry in CPLB table.
Otherwise, there is no extra overhead.
+config DEBUG_BFIN_HWTRACE_ON
+ bool "Turn on Blackfin's Hardware Trace"
+ default y
+ help
+ All Blackfins include a Trace Unit which stores a history of the last
+ 16 changes in program flow taken by the program sequencer. The history
+ allows the user to recreate the program sequencer’s recent path. This
+ can be handy when an application dies - we print out the execution
+ path of how it got to the offending instruction.
+
+ By turning this off, you may save a tiny amount of power.
+
+choice
+ prompt "Omit loop Tracing"
+ default DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+ depends on DEBUG_BFIN_HWTRACE_ON
+ help
+ The trace buffer can be configured to omit recording of changes in
+ program flow that match either the last entry or one of the last
+ two entries. Omitting one of these entries from the record prevents
+ the trace buffer from overflowing because of any sort of loop (for, do
+ while, etc) in the program.
+
+ Because zero-overhead Hardware loops are not recorded in the trace buffer,
+ this feature can be used to prevent trace overflow from loops that
+ are nested four deep.
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+ bool "Trace all Loops"
+ help
+ The trace buffer records all changes of flow
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
+ bool "Compress single-level loops"
+ help
+ The trace buffer does not record single loops - helpful if trace
+ is spinning on a while or do loop.
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
+ bool "Compress two-level loops"
+ help
+ The trace buffer does not record loops two levels deep. Helpful if
+ the trace is spinning in a nested loop
+
+endchoice
+
+config DEBUG_BFIN_HWTRACE_COMPRESSION
+ int
+ depends on DEBUG_BFIN_HWTRACE_ON
+ default 0 if DEBUG_BFIN_HWTRACE_COMPRESSION_OFF
+ default 1 if DEBUG_BFIN_HWTRACE_COMPRESSION_ONE
+ default 2 if DEBUG_BFIN_HWTRACE_COMPRESSION_TWO
+
+
+config DEBUG_BFIN_HWTRACE_EXPAND
+ bool "Expand Trace Buffer greater than 16 entries"
+ depends on DEBUG_BFIN_HWTRACE_ON
+ default n
+ help
+ By selecting this option, every time the 16 hardware entries in
+ the Blackfin's HW Trace buffer are full, the kernel will move them
+ into a software buffer, for dumping when there is an issue. This
+ has a great impact on performance, (an interrupt every 16 change of
+ flows) and should normally be turned off, except in those nasty
+ debugging sessions
+
+config DEBUG_BFIN_HWTRACE_EXPAND_LEN
+ int "Size of Trace buffer (in power of 2k)"
+ range 0 4
+ depends on DEBUG_BFIN_HWTRACE_EXPAND
+ default 1
+ help
+ This sets the size of the software buffer that the trace information
+ is kept in.
+ 0 for (2^0) 1k, or 256 entries,
+ 1 for (2^1) 2k, or 512 entries,
+ 2 for (2^2) 4k, or 1024 entries,
+ 3 for (2^3) 8k, or 2048 entries,
+ 4 for (2^4) 16k, or 4096 entries
+
config DEBUG_BFIN_NO_KERN_HWTRACE
bool "Trace user apps (turn off hwtrace in kernel)"
+ depends on DEBUG_BFIN_HWTRACE_ON
default n
help
Some pieces of the kernel contain a lot of flow changes which can
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 1b75672..2084166 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -24,6 +24,8 @@ machine-$(CONFIG_BF533) := bf533
machine-$(CONFIG_BF534) := bf537
machine-$(CONFIG_BF536) := bf537
machine-$(CONFIG_BF537) := bf537
+machine-$(CONFIG_BF542) := bf548
+machine-$(CONFIG_BF544) := bf548
machine-$(CONFIG_BF548) := bf548
machine-$(CONFIG_BF549) := bf548
machine-$(CONFIG_BF561) := bf561
@@ -36,6 +38,8 @@ cpu-$(CONFIG_BF533) := bf533
cpu-$(CONFIG_BF534) := bf534
cpu-$(CONFIG_BF536) := bf536
cpu-$(CONFIG_BF537) := bf537
+cpu-$(CONFIG_BF542) := bf542
+cpu-$(CONFIG_BF544) := bf544
cpu-$(CONFIG_BF548) := bf548
cpu-$(CONFIG_BF549) := bf549
cpu-$(CONFIG_BF561) := bf561
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index bafcfa5..979cf79 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -84,6 +84,7 @@
#include <linux/err.h>
#include <asm/blackfin.h>
#include <asm/gpio.h>
+#include <asm/portmux.h>
#include <linux/irq.h>
#ifdef BF533_FAMILY
@@ -115,7 +116,11 @@ static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
};
#endif
-static unsigned short reserved_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS + 16)];
+char *str_ident = NULL;
+
+#define RESOURCE_LABEL_SIZE 16
#ifdef CONFIG_PM
static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -143,22 +148,100 @@ inline int check_gpio(unsigned short gpio)
return 0;
}
+static void set_label(unsigned short ident, const char *label)
+{
+
+ if (label && str_ident) {
+ strncpy(str_ident + ident * RESOURCE_LABEL_SIZE, label,
+ RESOURCE_LABEL_SIZE);
+ str_ident[ident * RESOURCE_LABEL_SIZE +
+ RESOURCE_LABEL_SIZE - 1] = 0;
+ }
+}
+
+static char *get_label(unsigned short ident)
+{
+ if (!str_ident)
+ return "UNKNOWN";
+
+ return (str_ident[ident * RESOURCE_LABEL_SIZE] ?
+ (str_ident + ident * RESOURCE_LABEL_SIZE) : "UNKNOWN");
+}
+
+static int cmp_label(unsigned short ident, const char *label)
+{
+ if (label && str_ident)
+ return strncmp(str_ident + ident * RESOURCE_LABEL_SIZE,
+ label, strlen(label));
+ else
+ return -EINVAL;
+}
+
#ifdef BF537_FAMILY
static void port_setup(unsigned short gpio, unsigned short usage)
{
- if (usage == GPIO_USAGE) {
- if (*port_fer[gpio_bank(gpio)] & gpio_bit(gpio))
- printk(KERN_WARNING "bfin-gpio: Possible Conflict with Peripheral "
- "usage and GPIO %d detected!\n", gpio);
- *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
- } else
- *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
- SSYNC();
+ if (!check_gpio(gpio)) {
+ if (usage == GPIO_USAGE) {
+ *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ } else
+ *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
+ SSYNC();
+ }
}
#else
# define port_setup(...) do { } while (0)
#endif
+#ifdef BF537_FAMILY
+
+#define PMUX_LUT_RES 0
+#define PMUX_LUT_OFFSET 1
+#define PMUX_LUT_ENTRIES 41
+#define PMUX_LUT_SIZE 2
+
+static unsigned short port_mux_lut[PMUX_LUT_ENTRIES][PMUX_LUT_SIZE] = {
+ {P_PPI0_D13, 11}, {P_PPI0_D14, 11}, {P_PPI0_D15, 11},
+ {P_SPORT1_TFS, 11}, {P_SPORT1_TSCLK, 11}, {P_SPORT1_DTPRI, 11},
+ {P_PPI0_D10, 10}, {P_PPI0_D11, 10}, {P_PPI0_D12, 10},
+ {P_SPORT1_RSCLK, 10}, {P_SPORT1_RFS, 10}, {P_SPORT1_DRPRI, 10},
+ {P_PPI0_D8, 9}, {P_PPI0_D9, 9}, {P_SPORT1_DRSEC, 9},
+ {P_SPORT1_DTSEC, 9}, {P_TMR2, 8}, {P_PPI0_FS3, 8}, {P_TMR3, 7},
+ {P_SPI0_SSEL4, 7}, {P_TMR4, 6}, {P_SPI0_SSEL5, 6}, {P_TMR5, 5},
+ {P_SPI0_SSEL6, 5}, {P_UART1_RX, 4}, {P_UART1_TX, 4}, {P_TMR6, 4},
+ {P_TMR7, 4}, {P_UART0_RX, 3}, {P_UART0_TX, 3}, {P_DMAR0, 3},
+ {P_DMAR1, 3}, {P_SPORT0_DTSEC, 1}, {P_SPORT0_DRSEC, 1},
+ {P_CAN0_RX, 1}, {P_CAN0_TX, 1}, {P_SPI0_SSEL7, 1},
+ {P_SPORT0_TFS, 0}, {P_SPORT0_DTPRI, 0}, {P_SPI0_SSEL2, 0},
+ {P_SPI0_SSEL3, 0}
+};
+
+static void portmux_setup(unsigned short per, unsigned short function)
+{
+ u16 y, muxreg, offset;
+
+ for (y = 0; y < PMUX_LUT_ENTRIES; y++) {
+ if (port_mux_lut[y][PMUX_LUT_RES] == per) {
+
+ /* SET PORTMUX REG */
+
+ offset = port_mux_lut[y][PMUX_LUT_OFFSET];
+ muxreg = bfin_read_PORT_MUX();
+
+ if (offset != 1) {
+ muxreg &= ~(1 << offset);
+ } else {
+ muxreg &= ~(3 << 1);
+ }
+
+ muxreg |= (function << offset);
+ bfin_write_PORT_MUX(muxreg);
+ }
+ }
+}
+
+#else
+# define portmux_setup(...) do { } while (0)
+#endif
static void default_gpio(unsigned short gpio)
{
@@ -179,22 +262,15 @@ static void default_gpio(unsigned short gpio)
static int __init bfin_gpio_init(void)
{
- int i;
-
- printk(KERN_INFO "Blackfin GPIO Controller\n");
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE)
- reserved_map[gpio_bank(i)] = 0;
+ str_ident = kzalloc(RESOURCE_LABEL_SIZE * 256, GFP_KERNEL);
+ if (!str_ident)
+ return -ENOMEM;
-#if defined(BF537_FAMILY) && (defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
-# if defined(CONFIG_BFIN_MAC_RMII)
- reserved_map[gpio_bank(PORT_H)] = 0xC373;
-# else
- reserved_map[gpio_bank(PORT_H)] = 0xFFFF;
-# endif
-#endif
+ printk(KERN_INFO "Blackfin GPIO Controller\n");
return 0;
+
}
arch_initcall(bfin_gpio_init);
@@ -223,7 +299,7 @@ arch_initcall(bfin_gpio_init);
void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
{ \
unsigned long flags; \
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
local_irq_save(flags); \
if (arg) \
gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
@@ -243,7 +319,7 @@ SET_GPIO(both)
#define SET_GPIO_SC(name) \
void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
{ \
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
if (arg) \
gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
else \
@@ -254,11 +330,11 @@ EXPORT_SYMBOL(set_gpio_ ## name);
SET_GPIO_SC(maska)
SET_GPIO_SC(maskb)
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311
void set_gpio_data(unsigned short gpio, unsigned short arg)
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
if (arg)
gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
@@ -273,11 +349,11 @@ SET_GPIO_SC(data)
#endif
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311
void set_gpio_toggle(unsigned short gpio)
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
bfin_read_CHIPID();
@@ -286,7 +362,7 @@ void set_gpio_toggle(unsigned short gpio)
#else
void set_gpio_toggle(unsigned short gpio)
{
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
}
#endif
@@ -311,7 +387,7 @@ SET_GPIO_P(maska)
SET_GPIO_P(maskb)
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311
void set_gpiop_data(unsigned short gpio, unsigned short arg)
{
unsigned long flags;
@@ -345,12 +421,12 @@ GET_GPIO(maska)
GET_GPIO(maskb)
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311
unsigned short get_gpio_data(unsigned short gpio)
{
unsigned long flags;
unsigned short ret;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->data >> gpio_sub_n(gpio));
bfin_read_CHIPID();
@@ -379,7 +455,7 @@ GET_GPIO_P(both)
GET_GPIO_P(maska)
GET_GPIO_P(maskb)
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311
unsigned short get_gpiop_data(unsigned short gpio)
{
unsigned long flags;
@@ -494,13 +570,14 @@ u32 gpio_pm_setup(void)
gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir;
gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge;
gpio_bank_saved[bank].both = gpio_bankb[bank]->both;
- gpio_bank_saved[bank].reserved = reserved_map[bank];
+ gpio_bank_saved[bank].reserved =
+ reserved_gpio_map[bank];
gpio = i;
while (mask) {
if (mask & 1) {
- reserved_map[gpio_bank(gpio)] |=
+ reserved_gpio_map[gpio_bank(gpio)] |=
gpio_bit(gpio);
bfin_gpio_wakeup_type(gpio,
wakeup_flags_map[gpio]);
@@ -540,7 +617,8 @@ void gpio_pm_restore(void)
gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge;
gpio_bankb[bank]->both = gpio_bank_saved[bank].both;
- reserved_map[bank] = gpio_bank_saved[bank].reserved;
+ reserved_gpio_map[bank] =
+ gpio_bank_saved[bank].reserved;
}
@@ -550,6 +628,147 @@ void gpio_pm_restore(void)
#endif
+
+
+
+int peripheral_request(unsigned short per, const char *label)
+{
+ unsigned long flags;
+ unsigned short ident = P_IDENT(per);
+
+ /*
+ * Don't cares are pins with only one dedicated function
+ */
+
+ if (per & P_DONTCARE)
+ return 0;
+
+ if (!(per & P_DEFINED))
+ return -ENODEV;
+
+ local_irq_save(flags);
+
+ if (!check_gpio(ident)) {
+
+ if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
+ printk(KERN_ERR
+ "%s: Peripheral %d is already reserved as GPIO by %s !\n",
+ __FUNCTION__, ident, get_label(ident));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ }
+
+ if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) {
+
+ /*
+ * Pin functions like AMC address strobes my
+ * be requested and used by several drivers
+ */
+
+ if (!(per & P_MAYSHARE)) {
+
+ /*
+ * Allow that the identical pin function can
+ * be requested from the same driver twice
+ */
+
+ if (cmp_label(ident, label) == 0)
+ goto anyway;
+
+ printk(KERN_ERR
+ "%s: Peripheral %d function %d is already"
+ "reserved by %s !\n",
+ __FUNCTION__, ident, P_FUNCT2MUX(per),
+ get_label(ident));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ }
+
+anyway:
+
+
+ portmux_setup(per, P_FUNCT2MUX(per));
+
+ port_setup(ident, PERIPHERAL_USAGE);
+
+ reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
+ local_irq_restore(flags);
+ set_label(ident, label);
+
+ return 0;
+}
+EXPORT_SYMBOL(peripheral_request);
+
+int peripheral_request_list(unsigned short per[], const char *label)
+{
+ u16 cnt;
+ int ret;
+
+ for (cnt = 0; per[cnt] != 0; cnt++) {
+
+ ret = peripheral_request(per[cnt], label);
+
+ if (ret < 0) {
+ for ( ; cnt > 0; cnt--) {
+ peripheral_free(per[cnt - 1]);
+ }
+ return ret;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(peripheral_request_list);
+
+void peripheral_free(unsigned short per)
+{
+ unsigned long flags;
+ unsigned short ident = P_IDENT(per);
+
+ if (per & P_DONTCARE)
+ return;
+
+ if (!(per & P_DEFINED))
+ return;
+
+ if (check_gpio(ident) < 0)
+ return;
+
+ local_irq_save(flags);
+
+ if (unlikely(!(reserved_peri_map[gpio_bank(ident)]
+ & gpio_bit(ident)))) {
+ local_irq_restore(flags);
+ return;
+ }
+
+ if (!(per & P_MAYSHARE)) {
+ port_setup(ident, GPIO_USAGE);
+ }
+
+ reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident);
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(peripheral_free);
+
+void peripheral_free_list(unsigned short per[])
+{
+ u16 cnt;
+
+ for (cnt = 0; per[cnt] != 0; cnt++) {
+ peripheral_free(per[cnt]);
+ }
+
+}
+EXPORT_SYMBOL(peripheral_free_list);
+
/***********************************************************
*
* FUNCTIONS: Blackfin GPIO Driver
@@ -574,13 +793,13 @@ int gpio_request(unsigned short gpio, const char *label)
local_irq_save(flags);
- if (unlikely(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
dump_stack();
local_irq_restore(flags);
return -EBUSY;
}
- reserved_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+ reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
local_irq_restore(flags);
@@ -599,7 +818,7 @@ void gpio_free(unsigned short gpio)
local_irq_save(flags);
- if (unlikely(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+ if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio);
dump_stack();
local_irq_restore(flags);
@@ -608,7 +827,7 @@ void gpio_free(unsigned short gpio)
default_gpio(gpio);
- reserved_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
local_irq_restore(flags);
}
@@ -618,7 +837,7 @@ void gpio_direction_input(unsigned short gpio)
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
@@ -631,7 +850,7 @@ void gpio_direction_output(unsigned short gpio)
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
diff --git a/arch/blackfin/kernel/cplbinit.c b/arch/blackfin/kernel/cplbinit.c
index bbdb403..3b1c87c 100644
--- a/arch/blackfin/kernel/cplbinit.c
+++ b/arch/blackfin/kernel/cplbinit.c
@@ -230,8 +230,8 @@ static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_en
cplb_data[i].psize,
cplb_data[i].i_conf);
} else {
-#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
- if (i == SDRAM_KERN) {
+#if defined(CONFIG_BLKFIN_CACHE)
+ if (ANOMALY_05000263 && i == SDRAM_KERN) {
fill_cplbtab(t,
cplb_data[i].start,
cplb_data[i].end,
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
index ea48d5b..94d7b11 100644
--- a/arch/blackfin/kernel/dma-mapping.c
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -160,7 +160,8 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
BUG_ON(direction == DMA_NONE);
for (i = 0; i < nents; i++, sg++) {
- sg->dma_address = page_address(sg->page) + sg->offset;
+ sg->dma_address = (dma_addr_t)(page_address(sg->page) +
+ sg->offset);
invalidate_dcache_range(sg_dma_address(sg),
sg_dma_address(sg) +
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 1fc001c..462ae41 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -34,6 +34,7 @@
#include <linux/kallsyms.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <asm/trace.h>
static unsigned long irq_err_count;
static spinlock_t irq_controller_lock;
@@ -144,4 +145,12 @@ void __init init_IRQ(void)
}
init_arch_irq();
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ /* Now that evt_ivhw is set up, turn this on */
+ trace_buff_offset = 0;
+ bfin_write_TBUFCTL(BFIN_TRACE_ON);
+ printk(KERN_INFO "Hardware Trace expanded to %ik\n",
+ 1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN);
+#endif
}
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index f59dcee..02c1527 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -179,14 +179,16 @@ void __init setup_arch(char **cmdline_p)
cclk = get_cclk();
sclk = get_sclk();
-#if !defined(CONFIG_BFIN_KERNEL_CLOCK) && defined(ANOMALY_05000273)
- if (cclk == sclk)
+#if !defined(CONFIG_BFIN_KERNEL_CLOCK)
+ if (ANOMALY_05000273 && cclk == sclk)
panic("ANOMALY 05000273, SCLK can not be same as CCLK");
#endif
-#if defined(ANOMALY_05000266)
- bfin_read_IMDMA_D0_IRQ_STATUS();
- bfin_read_IMDMA_D1_IRQ_STATUS();
+#ifdef BF561_FAMILY
+ if (ANOMALY_05000266) {
+ bfin_read_IMDMA_D0_IRQ_STATUS();
+ bfin_read_IMDMA_D1_IRQ_STATUS();
+ }
#endif
#ifdef DEBUG_SERIAL_EARLY_INIT
@@ -260,7 +262,7 @@ void __init setup_arch(char **cmdline_p)
&& ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
mtd_size =
PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
-# if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+# if (defined(CONFIG_BLKFIN_CACHE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -289,7 +291,7 @@ void __init setup_arch(char **cmdline_p)
_ebss = memory_mtd_start; /* define _ebss for compatible */
#endif /* CONFIG_MTD_UCLINUX */
-#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+#if (defined(CONFIG_BLKFIN_CACHE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -337,10 +339,8 @@ void __init setup_arch(char **cmdline_p)
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu Mhz System Clock\n",
cclk / 1000000, sclk / 1000000);
-#if defined(ANOMALY_05000273)
- if ((cclk >> 1) <= sclk)
+ if (ANOMALY_05000273 && (cclk >> 1) <= sclk)
printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
-#endif
printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
@@ -402,11 +402,7 @@ void __init setup_arch(char **cmdline_p)
if (l1_length > L1_DATA_A_LENGTH)
panic("L1 data memory overflow\n");
-#ifdef BF561_FAMILY
- _bfin_swrst = bfin_read_SICA_SWRST();
-#else
_bfin_swrst = bfin_read_SWRST();
-#endif
/* Copy atomic sequences to their fixed location, and sanity check that
these locations are the ones that we advertise to userspace. */
@@ -429,6 +425,7 @@ void __init setup_arch(char **cmdline_p)
BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
!= ATOMIC_XOR32 - FIXED_CODE_START);
+ init_exception_vectors();
bf53x_cache_init();
}
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 3909f5b..3bc787a 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -54,6 +54,7 @@ asmlinkage void trap_c(struct pt_regs *fp);
int kstack_depth_to_print = 48;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
static int printk_address(unsigned long address)
{
struct vm_list_struct *vml;
@@ -130,17 +131,21 @@ static int printk_address(unsigned long address)
/* we were unable to find this address anywhere */
return printk("[<0x%p>]", (void *)address);
}
+#endif
asmlinkage void trap_c(struct pt_regs *fp)
{
- int j, sig = 0;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+ int j;
+#endif
+ int sig = 0;
siginfo_t info;
unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;
#ifdef CONFIG_KGDB
# define CHK_DEBUGGER_TRAP() \
do { \
- CHK_DEBUGGER(trapnr, sig, info.si_code, fp); \
+ CHK_DEBUGGER(trapnr, sig, info.si_code, fp, ); \
} while (0)
# define CHK_DEBUGGER_TRAP_MAYBE() \
do { \
@@ -428,24 +433,56 @@ asmlinkage void trap_c(struct pt_regs *fp)
/* Typical exception handling routines */
+#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
+
void dump_bfin_trace_buffer(void)
{
- int tflags;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+ int tflags, i = 0;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ int j, index;
+#endif
+
trace_buffer_save(tflags);
+ printk(KERN_EMERG "Hardware Trace:\n");
+
if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
- int i;
- printk(KERN_EMERG "Hardware Trace:\n");
- for (i = 0; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
- printk(KERN_EMERG "%2i Target : ", i);
+ for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
+ printk(KERN_EMERG "%4i Target : ", i);
printk_address((unsigned long)bfin_read_TBUF());
- printk("\n" KERN_EMERG " Source : ");
+ printk("\n" KERN_EMERG " Source : ");
printk_address((unsigned long)bfin_read_TBUF());
printk("\n");
}
}
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ if (trace_buff_offset)
+ index = trace_buff_offset/4 - 1;
+ else
+ index = EXPAND_LEN;
+
+ j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
+ while (j) {
+ printk(KERN_EMERG "%4i Target : ", i);
+ printk_address(software_trace_buff[index]);
+ index -= 1;
+ if (index < 0 )
+ index = EXPAND_LEN;
+ printk("\n" KERN_EMERG " Source : ");
+ printk_address(software_trace_buff[index]);
+ index -= 1;
+ if (index < 0)
+ index = EXPAND_LEN;
+ printk("\n");
+ j--;
+ i++;
+ }
+#endif
+
trace_buffer_restore(tflags);
+#endif
}
EXPORT_SYMBOL(dump_bfin_trace_buffer);
@@ -509,7 +546,9 @@ void show_stack(struct task_struct *task, unsigned long *stack)
void dump_stack(void)
{
unsigned long stack;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
int tflags;
+#endif
trace_buffer_save(tflags);
dump_bfin_trace_buffer();
show_stack(current, &stack);
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index d06f860..fb53780 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -32,6 +32,7 @@
#include <asm-generic/vmlinux.lds.h>
#include <asm/mem_map.h>
#include <asm/page.h>
+#include <asm/thread_info.h>
OUTPUT_FORMAT("elf32-bfin")
ENTRY(__start)
@@ -64,8 +65,12 @@ SECTIONS
.data :
{
- . = ALIGN(PAGE_SIZE);
+ /* make sure the init_task is aligned to the
+ * kernel thread size so we can locate the kernel
+ * stack properly and quickly.
+ */
__sdata = .;
+ . = ALIGN(THREAD_SIZE);
*(.data.init_task)
DATA_DATA
CONSTRUCTORS
@@ -73,14 +78,14 @@ SECTIONS
. = ALIGN(32);
*(.data.cacheline_aligned)
- . = ALIGN(PAGE_SIZE);
+ . = ALIGN(THREAD_SIZE);
__edata = .;
}
- . = ALIGN(PAGE_SIZE);
___init_begin = .;
.init :
{
+ . = ALIGN(PAGE_SIZE);
__sinittext = .;
*(.init.text)
__einittext = .;
@@ -153,10 +158,9 @@ SECTIONS
__ebss_b_l1 = .;
}
- . = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
- ___init_end = ALIGN(PAGE_SIZE);
+ ___init_end = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
- .bss ___init_end :
+ .bss LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1) :
{
. = ALIGN(4);
___bss_start = .;
diff --git a/arch/blackfin/lib/memcmp.S b/arch/blackfin/lib/memcmp.S
index b88c5d2..219fa28 100644
--- a/arch/blackfin/lib/memcmp.S
+++ b/arch/blackfin/lib/memcmp.S
@@ -61,7 +61,7 @@ ENTRY(_memcmp)
LSETUP (.Lquad_loop_s, .Lquad_loop_e) LC0=P1;
.Lquad_loop_s:
-#ifdef ANOMALY_05000202
+#if ANOMALY_05000202
R0 = [P0++];
R1 = [I0++];
#else
diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S
index 14a5585..2e63364 100644
--- a/arch/blackfin/lib/memcpy.S
+++ b/arch/blackfin/lib/memcpy.S
@@ -98,7 +98,7 @@ ENTRY(_memcpy)
R0 = R1;
I1 = P1;
R3 = [I1++];
-#ifdef ANOMALY_05000202
+#if ANOMALY_05000202
.Lword_loops:
[P0++] = R3;
.Lword_loope:
diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S
index 6ee6e20..33f8653 100644
--- a/arch/blackfin/lib/memmove.S
+++ b/arch/blackfin/lib/memmove.S
@@ -70,7 +70,7 @@ ENTRY(_memmove)
R1 = [I0++];
LSETUP (.Lquad_loops, .Lquad_loope) LC0=P1;
-#ifdef ANOMALY_05000202
+#if ANOMALY_05000202
.Lquad_loops:
[P0++] = R1;
.Lquad_loope:
@@ -102,7 +102,7 @@ ENTRY(_memmove)
R1 = B[P3--] (Z);
CC = P2 == 0;
IF CC JUMP .Lno_loop;
-#ifdef ANOMALY_05000245
+#if ANOMALY_05000245
NOP;
NOP;
#endif
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index 7dd0e9c..bdc796e 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -97,7 +97,7 @@ ENTRY(__start)
M2 = r0;
M3 = r0;
- trace_buffer_start(p0,r0);
+ trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
@@ -144,38 +144,38 @@ ENTRY(__start)
ssync;
/* Turn off the icache */
- p0.l = (IMEM_CONTROL & 0xFFFF);
- p0.h = (IMEM_CONTROL >> 16);
+ p0.l = LO(IMEM_CONTROL);
+ p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
/* Turn off the dcache */
- p0.l = (DMEM_CONTROL & 0xFFFF);
- p0.h = (DMEM_CONTROL >> 16);
+ p0.l = LO(DMEM_CONTROL);
+ p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
@@ -264,7 +264,7 @@ ENTRY(__start)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
nop; nop; nop;
#endif
rti;
@@ -417,8 +417,8 @@ ENTRY(_start_dma_code)
w[p0] = r0.l;
ssync;
- p0.l = (EBIU_SDBCTL & 0xFFFF);
- p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ p0.l = LO(EBIU_SDBCTL);
+ p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
r0 = mem_SDBCTL;
w[p0] = r0.l;
ssync;
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
index 429c8a1..166a7d7 100644
--- a/arch/blackfin/mach-bf537/head.S
+++ b/arch/blackfin/mach-bf537/head.S
@@ -95,43 +95,43 @@ ENTRY(__start)
M2 = r0;
M3 = r0;
- trace_buffer_start(p0,r0);
+ trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */
- p0.l = (IMEM_CONTROL & 0xFFFF);
- p0.h = (IMEM_CONTROL >> 16);
+ p0.l = LO(IMEM_CONTROL);
+ p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
/* Turn off the dcache */
- p0.l = (DMEM_CONTROL & 0xFFFF);
- p0.h = (DMEM_CONTROL >> 16);
+ p0.l = LO(DMEM_CONTROL);
+ p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
@@ -141,12 +141,12 @@ ENTRY(__start)
*/
p0.h = hi(BFIN_PORT_MUX);
p0.l = lo(BFIN_PORT_MUX);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
R0.L = W[P0]; /* Read */
SSYNC;
#endif
R0 = (PGDE_UART | PFTE_UART)(Z);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
W[P0] = R0.L; /* Write */
SSYNC;
#endif
@@ -155,12 +155,12 @@ ENTRY(__start)
p0.h = hi(PORTF_FER);
p0.l = lo(PORTF_FER);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
R0.L = W[P0]; /* Read */
SSYNC;
#endif
R0 = 0x000F(Z);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
W[P0] = R0.L; /* Write */
SSYNC;
#endif
@@ -274,7 +274,7 @@ ENTRY(__start)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
nop; nop; nop;
#endif
rti;
@@ -436,8 +436,8 @@ ENTRY(_start_dma_code)
w[p0] = r0.l;
ssync;
- p0.l = (EBIU_SDBCTL & 0xFFFF);
- p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ p0.l = LO(EBIU_SDBCTL);
+ p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
r0 = mem_SDBCTL;
w[p0] = r0.l;
ssync;
diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig
index e78b03d..3976b7f 100644
--- a/arch/blackfin/mach-bf548/Kconfig
+++ b/arch/blackfin/mach-bf548/Kconfig
@@ -282,7 +282,7 @@ menu "Assignment"
config PINTx_REASSIGN
bool "Reprogram PINT Assignment"
- default n
+ default y
help
The interrupt assignment registers controls the pin-to-interrupt
assignment in a byte-wide manner. Each option allows you to select
@@ -303,7 +303,7 @@ config PINT1_ASSIGN
config PINT2_ASSIGN
hex "PINT2_ASSIGN"
depends on PINTx_REASSIGN
- default 0x00000101
+ default 0x07000101
config PINT3_ASSIGN
hex "PINT3_ASSIGN"
depends on PINTx_REASSIGN
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 96ad95f..12677c2 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -94,6 +94,26 @@ static struct platform_device bfin_uart_device = {
};
#endif
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bf54x_spi_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device bf54x_spi_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
@@ -102,12 +122,22 @@ static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &bf54x_spi_master_device,
+#endif
};
static int __init stamp_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bf54x_spi_board_info,
+ ARRAY_SIZE(bf54x_spi_board_info));
+#endif
+
return 0;
}
diff --git a/arch/blackfin/mach-bf548/gpio.c b/arch/blackfin/mach-bf548/gpio.c
index 0da5f00..f3b9dea 100644
--- a/arch/blackfin/mach-bf548/gpio.c
+++ b/arch/blackfin/mach-bf548/gpio.c
@@ -49,6 +49,9 @@ static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+char *str_ident = NULL;
+
+#define RESOURCE_LABEL_SIZE 16
inline int check_gpio(unsigned short gpio)
{
@@ -70,7 +73,6 @@ inline void portmux_setup(unsigned short portno, unsigned short function)
pmux |= (function & 0x3) << (2 * gpio_sub_n(portno));
gpio_array[gpio_bank(portno)]->port_mux = pmux;
-
}
inline u16 get_portmux(unsigned short portno)
@@ -80,16 +82,11 @@ inline u16 get_portmux(unsigned short portno)
pmux = gpio_array[gpio_bank(portno)]->port_mux;
return (pmux >> (2 * gpio_sub_n(portno)) & 0x3);
-
}
static void port_setup(unsigned short gpio, unsigned short usage)
{
if (usage == GPIO_USAGE) {
- if (gpio_array[gpio_bank(gpio)]->port_fer & gpio_bit(gpio))
- printk(KERN_WARNING
- "bfin-gpio: Possible Conflict with Peripheral "
- "usage and GPIO %d detected!\n", gpio);
gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
} else
gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
@@ -98,6 +95,11 @@ static void port_setup(unsigned short gpio, unsigned short usage)
static int __init bfin_gpio_init(void)
{
+
+ str_ident = kzalloc(RESOURCE_LABEL_SIZE * 256, GFP_KERNEL);
+ if (!str_ident)
+ return -ENOMEM;
+
printk(KERN_INFO "Blackfin GPIO Controller\n");
return 0;
@@ -105,11 +107,47 @@ static int __init bfin_gpio_init(void)
arch_initcall(bfin_gpio_init);
+static void set_label(unsigned short ident, const char *label)
+{
+
+ if (label && str_ident) {
+ strncpy(str_ident + ident * RESOURCE_LABEL_SIZE, label,
+ RESOURCE_LABEL_SIZE);
+ str_ident[ident * RESOURCE_LABEL_SIZE +
+ RESOURCE_LABEL_SIZE - 1] = 0;
+ }
+}
+
+static char *get_label(unsigned short ident)
+{
+ if (!str_ident)
+ return "UNKNOWN";
+
+ return (str_ident[ident * RESOURCE_LABEL_SIZE] ?
+ (str_ident + ident * RESOURCE_LABEL_SIZE) : "UNKNOWN");
+}
+
+static int cmp_label(unsigned short ident, const char *label)
+{
+ if (label && str_ident)
+ return strncmp(str_ident + ident * RESOURCE_LABEL_SIZE,
+ label, strlen(label));
+ else
+ return -EINVAL;
+}
+
int peripheral_request(unsigned short per, const char *label)
{
unsigned long flags;
unsigned short ident = P_IDENT(per);
+ /*
+ * Don't cares are pins with only one dedicated function
+ */
+
+ if (per & P_DONTCARE)
+ return 0;
+
if (!(per & P_DEFINED))
return -ENODEV;
@@ -120,8 +158,8 @@ int peripheral_request(unsigned short per, const char *label)
if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
printk(KERN_ERR
- "%s: Peripheral %d is already reserved as GPIO!\n",
- __FUNCTION__, per);
+ "%s: Peripheral %d is already reserved as GPIO by %s !\n",
+ __FUNCTION__, ident, get_label(ident));
dump_stack();
local_irq_restore(flags);
return -EBUSY;
@@ -131,22 +169,38 @@ int peripheral_request(unsigned short per, const char *label)
u16 funct = get_portmux(ident);
+ /*
+ * Pin functions like AMC address strobes my
+ * be requested and used by several drivers
+ */
+
if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) {
+
+ /*
+ * Allow that the identical pin function can
+ * be requested from the same driver twice
+ */
+
+ if (cmp_label(ident, label) == 0)
+ goto anyway;
+
printk(KERN_ERR
- "%s: Peripheral %d is already reserved!\n",
- __FUNCTION__, per);
+ "%s: Peripheral %d function %d is already reserved by %s !\n",
+ __FUNCTION__, ident, P_FUNCT2MUX(per), get_label(ident));
dump_stack();
local_irq_restore(flags);
return -EBUSY;
}
}
+anyway:
reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
portmux_setup(ident, P_FUNCT2MUX(per));
port_setup(ident, PERIPHERAL_USAGE);
local_irq_restore(flags);
+ set_label(ident, label);
return 0;
}
@@ -154,16 +208,22 @@ EXPORT_SYMBOL(peripheral_request);
int peripheral_request_list(unsigned short per[], const char *label)
{
-
u16 cnt;
int ret;
for (cnt = 0; per[cnt] != 0; cnt++) {
+
ret = peripheral_request(per[cnt], label);
- if (ret < 0)
- return ret;
+
+ if (ret < 0) {
+ for ( ; cnt > 0; cnt--) {
+ peripheral_free(per[cnt - 1]);
+ }
+ return ret;
+ }
}
+
return 0;
}
EXPORT_SYMBOL(peripheral_request_list);
@@ -173,6 +233,9 @@ void peripheral_free(unsigned short per)
unsigned long flags;
unsigned short ident = P_IDENT(per);
+ if (per & P_DONTCARE)
+ return;
+
if (!(per & P_DEFINED))
return;
@@ -182,8 +245,6 @@ void peripheral_free(unsigned short per)
local_irq_save(flags);
if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) {
- printk(KERN_ERR "bfin-gpio: Peripheral %d wasn't reserved!\n", per);
- dump_stack();
local_irq_restore(flags);
return;
}
@@ -234,7 +295,8 @@ int gpio_request(unsigned short gpio, const char *label)
local_irq_save(flags);
if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
+ printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
+ gpio, get_label(gpio));
dump_stack();
local_irq_restore(flags);
return -EBUSY;
@@ -242,7 +304,8 @@ int gpio_request(unsigned short gpio, const char *label)
if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
printk(KERN_ERR
- "bfin-gpio: GPIO %d is already reserved as Peripheral!\n", gpio);
+ "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
+ gpio, get_label(gpio));
dump_stack();
local_irq_restore(flags);
return -EBUSY;
@@ -253,6 +316,7 @@ int gpio_request(unsigned short gpio, const char *label)
local_irq_restore(flags);
port_setup(gpio, GPIO_USAGE);
+ set_label(gpio, label);
return 0;
}
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index 06751ae..72d8da4 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -92,13 +92,13 @@ ENTRY(__stext)
M2 = r0;
M3 = r0;
- trace_buffer_start(p0,r0);
+ trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */
- p0.l = (IMEM_CONTROL & 0xFFFF);
- p0.h = (IMEM_CONTROL >> 16);
+ p0.l = LO(IMEM_CONTROL);
+ p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
@@ -106,8 +106,8 @@ ENTRY(__stext)
SSYNC;
/* Turn off the dcache */
- p0.l = (DMEM_CONTROL & 0xFFFF);
- p0.h = (DMEM_CONTROL >> 16);
+ p0.l = LO(DMEM_CONTROL);
+ p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
@@ -172,7 +172,7 @@ ENTRY(__stext)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined (ANOMALY_05000281)
+#if ANOMALY_05000281
nop;
nop;
nop;
@@ -335,8 +335,8 @@ ENTRY(_start_dma_code)
w[p0] = r0.l;
ssync;
- p0.l = (EBIU_SDBCTL & 0xFFFF);
- p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ p0.l = LO(EBIU_SDBCTL);
+ p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
r0 = mem_SDBCTL;
w[p0] = r0.l;
ssync;
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
index 2f08bcb..f5eaafc 100644
--- a/arch/blackfin/mach-bf561/head.S
+++ b/arch/blackfin/mach-bf561/head.S
@@ -95,43 +95,42 @@ ENTRY(__start)
M2 = r0;
M3 = r0;
- trace_buffer_start(p0,r0);
+ trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */
- p0.l = (IMEM_CONTROL & 0xFFFF);
- p0.h = (IMEM_CONTROL >> 16);
+ p0.l = LO(IMEM_CONTROL);
+ p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
- /* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
/* Turn off the dcache */
- p0.l = (DMEM_CONTROL & 0xFFFF);
- p0.h = (DMEM_CONTROL >> 16);
+ p0.l = LO(DMEM_CONTROL);
+ p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
@@ -220,7 +219,7 @@ ENTRY(__start)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
nop; nop; nop;
#endif
rti;
@@ -372,8 +371,8 @@ ENTRY(_start_dma_code)
w[p0] = r0.l;
ssync;
- p0.l = (EBIU_SDBCTL & 0xFFFF);
- p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ p0.l = LO(EBIU_SDBCTL);
+ p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
r0 = mem_SDBCTL;
w[p0] = r0.l;
ssync;
@@ -440,15 +439,15 @@ ENTRY(_bfin_reset)
SSYNC;
/* make sure SYSCR is set to use BMODE */
- P0.h = hi(SICA_SYSCR);
- P0.l = lo(SICA_SYSCR);
- R0.l = 0x20;
+ P0.h = hi(SYSCR);
+ P0.l = lo(SYSCR);
+ R0.l = 0x20; /* on BF561, disable core b */
W[P0] = R0.l;
SSYNC;
/* issue a system soft reset */
- P1.h = hi(SICA_SWRST);
- P1.l = lo(SICA_SWRST);
+ P1.h = hi(SWRST);
+ P1.l = lo(SWRST);
R1.l = 0x0007;
W[P1] = R1;
SSYNC;
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index 7063795..0521b15 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -79,8 +79,8 @@ ENTRY(_icache_invalidate)
ENTRY(_invalidate_entire_icache)
[--SP] = ( R7:5);
- P0.L = (IMEM_CONTROL & 0xFFFF);
- P0.H = (IMEM_CONTROL >> 16);
+ P0.L = LO(IMEM_CONTROL);
+ P0.H = HI(IMEM_CONTROL);
R7 = [P0];
/* Clear the IMC bit , All valid bits in the instruction
@@ -197,8 +197,8 @@ ENTRY(_invalidate_entire_dcache)
ENTRY(_dcache_invalidate)
[--SP] = ( R7:6);
- P0.L = (DMEM_CONTROL & 0xFFFF);
- P0.H = (DMEM_CONTROL >> 16);
+ P0.L = LO(DMEM_CONTROL);
+ P0.H = HI(DMEM_CONTROL);
R7 = [P0];
/* Clear the DMC[1:0] bits, All valid bits in the data
diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S
index 9d47562..afa0adf 100644
--- a/arch/blackfin/mach-common/cacheinit.S
+++ b/arch/blackfin/mach-common/cacheinit.S
@@ -38,13 +38,13 @@
.text
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
#if defined(CONFIG_BLKFIN_CACHE)
ENTRY(_bfin_write_IMEM_CONTROL)
/* Enable Instruction Cache */
- P0.l = (IMEM_CONTROL & 0xFFFF);
- P0.h = (IMEM_CONTROL >> 16);
+ P0.l = LO(IMEM_CONTROL);
+ P0.h = HI(IMEM_CONTROL);
/* Anomaly 05000125 */
CLI R1;
@@ -60,6 +60,9 @@ ENDPROC(_bfin_write_IMEM_CONTROL)
#if defined(CONFIG_BLKFIN_DCACHE)
ENTRY(_bfin_write_DMEM_CONTROL)
+ P0.l = (DMEM_CONTROL & 0xFFFF);
+ P0.h = (DMEM_CONTROL >> 16);
+
CLI R1;
SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
.align 8;
diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S
index e4b47e0..cef94c1 100644
--- a/arch/blackfin/mach-common/cplbmgr.S
+++ b/arch/blackfin/mach-common/cplbmgr.S
@@ -75,15 +75,15 @@ ENTRY(_cplb_mgr)
* from the configuration table.
*/
- P4.L = (ICPLB_FAULT_ADDR & 0xFFFF);
- P4.H = (ICPLB_FAULT_ADDR >> 16);
+ P4.L = LO(ICPLB_FAULT_ADDR);
+ P4.H = HI(ICPLB_FAULT_ADDR);
P1 = 16;
P5.L = _page_size_table;
P5.H = _page_size_table;
- P0.L = (ICPLB_DATA0 & 0xFFFF);
- P0.H = (ICPLB_DATA0 >> 16);
+ P0.L = LO(ICPLB_DATA0);
+ P0.H = HI(ICPLB_DATA0);
R4 = [P4]; /* Get faulting address*/
R6 = 64; /* Advance past the fault address, which*/
R6 = R6 + R4; /* we'll use if we find a match*/
@@ -117,13 +117,13 @@ ENTRY(_cplb_mgr)
I0 = R4; /* Fault address we'll search for*/
/* set up pointers */
- P0.L = (ICPLB_DATA0 & 0xFFFF);
- P0.H = (ICPLB_DATA0 >> 16);
+ P0.L = LO(ICPLB_DATA0);
+ P0.H = HI(ICPLB_DATA0);
/* The replacement procedure for ICPLBs */
- P4.L = (IMEM_CONTROL & 0xFFFF);
- P4.H = (IMEM_CONTROL >> 16);
+ P4.L = LO(IMEM_CONTROL);
+ P4.H = HI(IMEM_CONTROL);
/* disable cplbs */
R5 = [P4]; /* Control Register*/
@@ -243,8 +243,8 @@ ENTRY(_cplb_mgr)
* last entry of the table.
*/
- P1.L = (ICPLB_DATA15 & 0xFFFF); /* ICPLB_DATA15 */
- P1.H = (ICPLB_DATA15 >> 16);
+ P1.L = LO(ICPLB_DATA15); /* ICPLB_DATA15 */
+ P1.H = HI(ICPLB_DATA15);
[P1] = R2;
[P1-0x100] = R4;
#ifdef CONFIG_CPLB_INFO
@@ -292,10 +292,10 @@ ENTRY(_cplb_mgr)
* pending writes associated with the CPLB.
*/
- P4.L = (DCPLB_STATUS & 0xFFFF);
- P4.H = (DCPLB_STATUS >> 16);
- P3.L = (DCPLB_DATA0 & 0xFFFF);
- P3.H = (DCPLB_DATA0 >> 16);
+ P4.L = LO(DCPLB_STATUS);
+ P4.H = HI(DCPLB_STATUS);
+ P3.L = LO(DCPLB_DATA0);
+ P3.H = HI(DCPLB_DATA0);
R5 = [P4];
/* A protection violation can be caused by more than just writes
@@ -355,11 +355,11 @@ ENTRY(_cplb_mgr)
* config table, that covers the faulting address.
*/
- P1.L = (DCPLB_DATA15 & 0xFFFF);
- P1.H = (DCPLB_DATA15 >> 16);
+ P1.L = LO(DCPLB_DATA15);
+ P1.H = HI(DCPLB_DATA15);
- P4.L = (DCPLB_FAULT_ADDR & 0xFFFF);
- P4.H = (DCPLB_FAULT_ADDR >> 16);
+ P4.L = LO(DCPLB_FAULT_ADDR);
+ P4.H = HI(DCPLB_FAULT_ADDR);
R4 = [P4];
I0 = R4;
@@ -368,8 +368,8 @@ ENTRY(_cplb_mgr)
R6 = R1; /* Save for later*/
/* Turn off CPLBs while we work.*/
- P4.L = (DMEM_CONTROL & 0xFFFF);
- P4.H = (DMEM_CONTROL >> 16);
+ P4.L = LO(DMEM_CONTROL);
+ P4.H = HI(DMEM_CONTROL);
R5 = [P4];
BITCLR(R5,ENDCPLB_P);
CLI R0;
@@ -384,8 +384,8 @@ ENTRY(_cplb_mgr)
* are no good.
*/
- I1.L = (DCPLB_DATA0 & 0xFFFF);
- I1.H = (DCPLB_DATA0 >> 16);
+ I1.L = LO(DCPLB_DATA0);
+ I1.H = HI(DCPLB_DATA0);
P1 = 2;
P2 = 16;
I2.L = _dcplb_preference;
@@ -405,7 +405,7 @@ ENTRY(_cplb_mgr)
P3.L = _page_size_table; /* retrieve end address */
P3.H = _page_size_table; /* retrieve end address */
R3 = 0x1002; /* 16th - position, 2 bits -length */
-#ifdef ANOMALY_05000209
+#if ANOMALY_05000209
nop; /* Anomaly 05000209 */
#endif
R7 = EXTRACT(R1,R3.l);
@@ -475,8 +475,8 @@ ENTRY(_cplb_mgr)
* one space closer to the start.
*/
- R1.L = (DCPLB_DATA16 & 0xFFFF); /* DCPLB_DATA15 + 4 */
- R1.H = (DCPLB_DATA16 >> 16);
+ R1.L = LO(DCPLB_DATA16); /* DCPLB_DATA15 + 4 */
+ R1.H = HI(DCPLB_DATA16);
R0 = P0;
/* If the victim happens to be in DCPLB15,
@@ -549,8 +549,8 @@ ENTRY(_cplb_mgr)
* if necessary.
*/
- P1.L = (DCPLB_DATA15 & 0xFFFF);
- P1.H = (DCPLB_DATA15 >> 16);
+ P1.L = LO(DCPLB_DATA15);
+ P1.H = HI(DCPLB_DATA15);
/* If the DCPLB has cache bits set, but caching hasn't
* been enabled, then we want to mask off the cache-in-L1
diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S
index 97cdcd6..04194dc 100644
--- a/arch/blackfin/mach-common/dpmc.S
+++ b/arch/blackfin/mach-common/dpmc.S
@@ -39,8 +39,8 @@ ENTRY(_unmask_wdog_wakeup_evt)
P0.H = hi(SICA_IWR1);
P0.L = lo(SICA_IWR1);
#else
- P0.h = (SIC_IWR >> 16);
- P0.l = (SIC_IWR & 0xFFFF);
+ P0.h = HI(SIC_IWR);
+ P0.l = LO(SIC_IWR);
#endif
R7 = [P0];
#if defined(CONFIG_BF561)
@@ -60,11 +60,11 @@ ENTRY(_unmask_wdog_wakeup_evt)
*/
R7 = 0x0000(z);
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_STAT >> 16);
- P0.l = (WDOGA_STAT & 0xFFFF);
+ P0.h = HI(WDOGA_STAT);
+ P0.l = LO(WDOGA_STAT);
#else
- P0.h = (WDOG_STAT >> 16);
- P0.l = (WDOG_STAT & 0xFFFF);
+ P0.h = HI(WDOG_STAT);
+ P0.l = LO(WDOG_STAT);
#endif
[P0] = R7;
SSYNC;
@@ -73,21 +73,21 @@ ENTRY(_unmask_wdog_wakeup_evt)
ENTRY(_program_wdog_timer)
[--SP] = ( R7:0, P5:0 );
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_CNT >> 16);
- P0.l = (WDOGA_CNT & 0xFFFF);
+ P0.h = HI(WDOGA_CNT);
+ P0.l = LO(WDOGA_CNT);
#else
- P0.h = (WDOG_CNT >> 16);
- P0.l = (WDOG_CNT & 0xFFFF);
+ P0.h = HI(WDOG_CNT);
+ P0.l = LO(WDOG_CNT);
#endif
[P0] = R0;
SSYNC;
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_CTL >> 16);
- P0.l = (WDOGA_CTL & 0xFFFF);
+ P0.h = HI(WDOGA_CTL);
+ P0.l = LO(WDOGA_CTL);
#else
- P0.h = (WDOG_CTL >> 16);
- P0.l = (WDOG_CTL & 0xFFFF);
+ P0.h = HI(WDOG_CTL);
+ P0.l = LO(WDOG_CTL);
#endif
R7 = W[P0](Z);
CC = BITTST(R7,1);
@@ -97,11 +97,11 @@ ENTRY(_program_wdog_timer)
.LSKIP_WRITE_TO_STAT:
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_CTL >> 16);
- P0.l = (WDOGA_CTL & 0xFFFF);
+ P0.h = HI(WDOGA_CTL);
+ P0.l = LO(WDOGA_CTL);
#else
- P0.h = (WDOG_CTL >> 16);
- P0.l = (WDOG_CTL & 0xFFFF);
+ P0.h = HI(WDOG_CTL);
+ P0.l = LO(WDOG_CTL);
#endif
R7 = W[P0](Z);
BITCLR(R7,1); /* Enable GP event */
@@ -122,11 +122,11 @@ ENTRY(_clear_wdog_wakeup_evt)
[--SP] = ( R7:0, P5:0 );
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_CTL >> 16);
- P0.l = (WDOGA_CTL & 0xFFFF);
+ P0.h = HI(WDOGA_CTL);
+ P0.l = LO(WDOGA_CTL);
#else
- P0.h = (WDOG_CTL >> 16);
- P0.l = (WDOG_CTL & 0xFFFF);
+ P0.h = HI(WDOG_CTL);
+ P0.l = LO(WDOG_CTL);
#endif
R7 = 0x0AD6(Z);
W[P0] = R7.L;
@@ -149,11 +149,11 @@ ENTRY(_clear_wdog_wakeup_evt)
ENTRY(_disable_wdog_timer)
[--SP] = ( R7:0, P5:0 );
#if defined(CONFIG_BF561)
- P0.h = (WDOGA_CTL >> 16);
- P0.l = (WDOGA_CTL & 0xFFFF);
+ P0.h = HI(WDOGA_CTL);
+ P0.l = LO(WDOGA_CTL);
#else
- P0.h = (WDOG_CTL >> 16);
- P0.l = (WDOG_CTL & 0xFFFF);
+ P0.h = HI(WDOG_CTL);
+ P0.l = LO(WDOG_CTL);
#endif
R7 = 0xAD6(Z);
W[P0] = R7.L;
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index d61bba9..f86ce76 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -69,7 +69,7 @@
* patch up CPLB misses on the kernel stack.
*/
ENTRY(_ex_dcplb)
-#if defined(ANOMALY_05000261)
+#if ANOMALY_05000261
/*
* Work around an anomaly: if we see a new DCPLB fault, return
* without doing anything. Then, if we get the same fault again,
@@ -137,7 +137,7 @@ ENTRY(_ex_single_step)
_return_from_exception:
DEBUG_START_HWTRACE(p5, r7)
-#ifdef ANOMALY_05000257
+#if ANOMALY_05000257
R7=LC0;
LC0=R7;
R7=LC1;
@@ -634,7 +634,7 @@ ENTRY(_return_from_int)
p1.h = _schedule_and_signal_from_int;
[p0] = p1;
csync;
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
r0.l = lo(CONFIG_BOOT_LOAD);
r0.h = hi(CONFIG_BOOT_LOAD);
reti = r0;
@@ -648,7 +648,7 @@ ENTRY(_return_from_int)
ENDPROC(_return_from_int)
ENTRY(_lower_to_irq14)
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
r0.l = lo(CONFIG_BOOT_LOAD);
r0.h = hi(CONFIG_BOOT_LOAD);
reti = r0;
@@ -731,6 +731,75 @@ ENTRY(_init_exception_buff)
rts;
ENDPROC(_init_exception_buff)
+/* We handle this 100% in exception space - to reduce overhead
+ * Only potiential problem is if the software buffer gets swapped out of the
+ * CPLB table - then double fault. - so we don't let this happen in other places
+ */
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ENTRY(_ex_trace_buff_full)
+ [--sp] = P3;
+ [--sp] = P2;
+ [--sp] = LC0;
+ [--sp] = LT0;
+ [--sp] = LB0;
+ P5.L = _trace_buff_offset;
+ P5.H = _trace_buff_offset;
+ P3 = [P5]; /* trace_buff_offset */
+ P5.L = lo(TBUFSTAT);
+ P5.H = hi(TBUFSTAT);
+ R7 = [P5];
+ R7 <<= 1; /* double, since we need to read twice */
+ LC0 = R7;
+ R7 <<= 2; /* need to shift over again,
+ * to get the number of bytes */
+ P5.L = lo(TBUF);
+ P5.H = hi(TBUF);
+ R6 = ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*1024) - 1;
+
+ P2 = R7;
+ P3 = P3 + P2;
+ R7 = P3;
+ R7 = R7 & R6;
+ P3 = R7;
+ P2.L = _trace_buff_offset;
+ P2.H = _trace_buff_offset;
+ [P2] = P3;
+
+ P2.L = _software_trace_buff;
+ P2.H = _software_trace_buff;
+
+ LSETUP (.Lstart, .Lend) LC0;
+.Lstart:
+ R7 = [P5]; /* read TBUF */
+ P4 = P3 + P2;
+ [P4] = R7;
+ P3 += -4;
+ R7 = P3;
+ R7 = R7 & R6;
+.Lend:
+ P3 = R7;
+
+ LB0 = [sp++];
+ LT0 = [sp++];
+ LC0 = [sp++];
+ P2 = [sp++];
+ P3 = [sp++];
+ jump _return_from_exception;
+
+#if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4
+.data
+#else
+.section .l1.data.B
+#endif
+ENTRY(_trace_buff_offset)
+ .long 0;
+ALIGN
+ENTRY(_software_trace_buff)
+ .rept ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*256);
+ .long 0
+ .endr
+#endif
+
/*
* Put these in the kernel data section - that should always be covered by
* a CPLB. This is needed to ensure we don't get double fault conditions
@@ -764,7 +833,11 @@ _extable:
.long _ex_trap_c /* 0x0E - User Defined */
.long _ex_trap_c /* 0x0F - User Defined */
.long _ex_single_step /* 0x10 - HW Single step */
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ .long _ex_trace_buff_full /* 0x11 - Trace Buffer Full */
+#else
.long _ex_trap_c /* 0x11 - Trace Buffer Full */
+#endif
.long _ex_trap_c /* 0x12 - Reserved */
.long _ex_trap_c /* 0x13 - Reserved */
.long _ex_trap_c /* 0x14 - Reserved */
@@ -1169,7 +1242,7 @@ _exception_stack:
.endr
_exception_stack_top:
-#if defined(ANOMALY_05000261)
+#if ANOMALY_05000261
/* Used by the assembly entry point to work around an anomaly. */
_last_cplb_fault_retx:
.long 0;
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 203e207..14ef800 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -140,7 +140,7 @@ __common_int_entry:
fp = 0;
#endif
-#if defined (ANOMALY_05000283) || defined (ANOMALY_05000315)
+#if ANOMALY_05000283 || ANOMALY_05000315
cc = r7 == r7;
p5.h = 0xffc0;
p5.l = 0x0014;
@@ -163,7 +163,7 @@ ENTRY(_evt_ivhw)
#ifdef CONFIG_FRAME_POINTER
fp = 0;
#endif
-#ifdef ANOMALY_05000283
+#if ANOMALY_05000283
cc = r7 == r7;
p5.h = 0xffc0;
p5.l = 0x0014;
@@ -207,7 +207,7 @@ ENTRY(_evt_evt2)
#ifdef CONFIG_FRAME_POINTER
fp = 0;
#endif
-#ifdef ANOMALY_05000283
+#if ANOMALY_05000283
cc = r7 == r7;
p5.h = 0xffc0;
p5.l = 0x0014;
diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c
index 6b9fd03..d5d9e57 100644
--- a/arch/blackfin/mach-common/ints-priority-dc.c
+++ b/arch/blackfin/mach-common/ints-priority-dc.c
@@ -221,7 +221,7 @@ static unsigned int bf561_gpio_irq_startup(unsigned int irq)
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
@@ -261,7 +261,7 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type)
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
@@ -358,26 +358,10 @@ static void bf561_demux_gpio_irq(unsigned int inta_irq,
#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */
-/*
- * This function should be called during kernel startup to initialize
- * the BFin IRQ handling routines.
- */
-int __init init_arch_irq(void)
+void __init init_exception_vectors(void)
{
- int irq;
- unsigned long ilat = 0;
- /* Disable all the peripheral intrs - page 4-29 HW Ref manual */
- bfin_write_SICA_IMASK0(SIC_UNMASK_ALL);
- bfin_write_SICA_IMASK1(SIC_UNMASK_ALL);
SSYNC();
- bfin_write_SICA_IWR0(IWR_ENABLE_ALL);
- bfin_write_SICA_IWR1(IWR_ENABLE_ALL);
-
- local_irq_disable();
-
- init_exception_buff();
-
#ifndef CONFIG_KGDB
bfin_write_EVT0(evt_emulation);
#endif
@@ -395,6 +379,27 @@ int __init init_arch_irq(void)
bfin_write_EVT14(evt14_softirq);
bfin_write_EVT15(evt_system_call);
CSYNC();
+}
+
+/*
+ * This function should be called during kernel startup to initialize
+ * the BFin IRQ handling routines.
+ */
+int __init init_arch_irq(void)
+{
+ int irq;
+ unsigned long ilat = 0;
+ /* Disable all the peripheral intrs - page 4-29 HW Ref manual */
+ bfin_write_SICA_IMASK0(SIC_UNMASK_ALL);
+ bfin_write_SICA_IMASK1(SIC_UNMASK_ALL);
+ SSYNC();
+
+ bfin_write_SICA_IWR0(IWR_ENABLE_ALL);
+ bfin_write_SICA_IWR1(IWR_ENABLE_ALL);
+
+ local_irq_disable();
+
+ init_exception_buff();
for (irq = 0; irq <= SYS_IRQS; irq++) {
if (irq <= IRQ_CORETMR)
diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c
index 28a878c..505b948 100644
--- a/arch/blackfin/mach-common/ints-priority-sc.c
+++ b/arch/blackfin/mach-common/ints-priority-sc.c
@@ -343,7 +343,7 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
u16 gpionr = irq - IRQ_PF0;
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
@@ -377,7 +377,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
@@ -579,11 +579,15 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
u16 gpionr = irq - IRQ_PA0;
u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
- if (pint_val == IRQ_NOT_AVAIL)
+ if (pint_val == IRQ_NOT_AVAIL) {
+ printk(KERN_ERR
+ "GPIO IRQ %d :Not in PINT Assign table "
+ "Reconfigure Interrupt to Port Assignemt\n", irq);
return -ENODEV;
+ }
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
@@ -623,7 +627,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- ret = gpio_request(gpionr, NULL);
+ ret = gpio_request(gpionr, "IRQ");
if (ret)
return ret;
}
@@ -713,6 +717,29 @@ static void bfin_demux_gpio_irq(unsigned int intb_irq,
}
#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */
+void __init init_exception_vectors(void)
+{
+ SSYNC();
+
+#ifndef CONFIG_KGDB
+ bfin_write_EVT0(evt_emulation);
+#endif
+ bfin_write_EVT2(evt_evt2);
+ bfin_write_EVT3(trap);
+ bfin_write_EVT5(evt_ivhw);
+ bfin_write_EVT6(evt_timer);
+ bfin_write_EVT7(evt_evt7);
+ bfin_write_EVT8(evt_evt8);
+ bfin_write_EVT9(evt_evt9);
+ bfin_write_EVT10(evt_evt10);
+ bfin_write_EVT11(evt_evt11);
+ bfin_write_EVT12(evt_evt12);
+ bfin_write_EVT13(evt_evt13);
+ bfin_write_EVT14(evt14_softirq);
+ bfin_write_EVT15(evt_system_call);
+ CSYNC();
+}
+
/*
* This function should be called during kernel startup to initialize
* the BFin IRQ handling routines.
@@ -733,29 +760,10 @@ int __init init_arch_irq(void)
bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
bfin_write_SIC_IWR(IWR_ENABLE_ALL);
#endif
-
SSYNC();
local_irq_disable();
-#ifndef CONFIG_KGDB
- bfin_write_EVT0(evt_emulation);
-#endif
- bfin_write_EVT2(evt_evt2);
- bfin_write_EVT3(trap);
- bfin_write_EVT5(evt_ivhw);
- bfin_write_EVT6(evt_timer);
- bfin_write_EVT7(evt_evt7);
- bfin_write_EVT8(evt_evt8);
- bfin_write_EVT9(evt_evt9);
- bfin_write_EVT10(evt_evt10);
- bfin_write_EVT11(evt_evt11);
- bfin_write_EVT12(evt_evt12);
- bfin_write_EVT13(evt_evt13);
- bfin_write_EVT14(evt14_softirq);
- bfin_write_EVT15(evt_system_call);
- CSYNC();
-
#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && defined(CONFIG_BF54x)
#ifdef CONFIG_PINTx_REASSIGN
pint[0]->assign = CONFIG_PINT0_ASSIGN;
diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S
index 386ac8d..190edb3 100644
--- a/arch/blackfin/mach-common/lock.S
+++ b/arch/blackfin/mach-common/lock.S
@@ -43,12 +43,12 @@ ENTRY(_cache_grab_lock)
[--SP]=( R7:0,P5:0 );
- P1.H = (IMEM_CONTROL >> 16);
- P1.L = (IMEM_CONTROL & 0xFFFF);
- P5.H = (ICPLB_ADDR0 >> 16);
- P5.L = (ICPLB_ADDR0 & 0xFFFF);
- P4.H = (ICPLB_DATA0 >> 16);
- P4.L = (ICPLB_DATA0 & 0xFFFF);
+ P1.H = HI(IMEM_CONTROL);
+ P1.L = LO(IMEM_CONTROL);
+ P5.H = HI(ICPLB_ADDR0);
+ P5.L = LO(ICPLB_ADDR0);
+ P4.H = HI(ICPLB_DATA0);
+ P4.L = LO(ICPLB_DATA0);
R7 = R0;
/* If the code of interest already resides in the cache
@@ -167,8 +167,8 @@ ENTRY(_cache_lock)
[--SP]=( R7:0,P5:0 );
- P1.H = (IMEM_CONTROL >> 16);
- P1.L = (IMEM_CONTROL & 0xFFFF);
+ P1.H = HI(IMEM_CONTROL);
+ P1.L = LO(IMEM_CONTROL);
/* Disable the Interrupts*/
CLI R3;
@@ -195,8 +195,8 @@ ENDPROC(_cache_lock)
*/
ENTRY(_read_iloc)
- P1.H = (IMEM_CONTROL >> 16);
- P1.L = (IMEM_CONTROL & 0xFFFF);
+ P1.H = HI(IMEM_CONTROL);
+ P1.L = LO(IMEM_CONTROL);
R1 = 0xF;
R0 = [P1];
R0 = R0 >> 3;
diff --git a/arch/blackfin/oprofile/op_blackfin.h b/arch/blackfin/oprofile/op_blackfin.h
index f88f446..05dd08c 100644
--- a/arch/blackfin/oprofile/op_blackfin.h
+++ b/arch/blackfin/oprofile/op_blackfin.h
@@ -68,7 +68,7 @@ static inline unsigned int ctr_read(void)
unsigned int tmp;
tmp = bfin_read_PFCTL();
- __builtin_bfin_csync();
+ CSYNC();
return tmp;
}
@@ -76,21 +76,21 @@ static inline unsigned int ctr_read(void)
static inline void ctr_write(unsigned int val)
{
bfin_write_PFCTL(val);
- __builtin_bfin_csync();
+ CSYNC();
}
static inline void count_read(unsigned int *count)
{
count[0] = bfin_read_PFCNTR0();
count[1] = bfin_read_PFCNTR1();
- __builtin_bfin_csync();
+ CSYNC();
}
static inline void count_write(unsigned int *count)
{
bfin_write_PFCNTR0(count[0]);
bfin_write_PFCNTR1(count[1]);
- __builtin_bfin_csync();
+ CSYNC();
}
extern int pm_overflow_handler(int irq, struct pt_regs *regs);
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index da16478..1842f52 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -92,9 +92,9 @@ config I2C_AU1550
config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
- depends on BF534 || BF536 || BF537
+ depends on BF534 || BF536 || BF537 || BF54x
help
- This is the TWI I2C device driver for Blackfin 534/536/537.
+ This is the TWI I2C device driver for Blackfin 534/536/537/54x.
This driver can also be built as a module. If so, the module
will be called i2c-bfin-twi.
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index adef447..5ce632c 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -21,7 +21,7 @@ if SERIO
config SERIO_I8042
tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
default y
- depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K
+ depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BFIN
---help---
i8042 is the chip over which the standard AT keyboard and PS/2
mouse are connected to the computer. If you use these devices,
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 9a08d65..2bb97d4 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -798,6 +798,7 @@ static void bf537mac_shutdown(struct net_device *dev)
*/
static int bf537mac_open(struct net_device *dev)
{
+ int retval;
pr_debug("%s: %s\n", dev->name, __FUNCTION__);
/*
@@ -811,7 +812,10 @@ static int bf537mac_open(struct net_device *dev)
}
/* initial rx and tx list */
- desc_list_init();
+ retval = desc_list_init();
+
+ if (retval)
+ return retval;
bf537mac_setphy(dev);
setup_system_regs(dev);
diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index 260ead9..1aa709d 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -1,6 +1,6 @@
/*
* Blackfin On-Chip Real Time Clock Driver
- * Supports BF531/BF532/BF533/BF534/BF536/BF537
+ * Supports BF53[123]/BF53[467]/BF54[2489]
*
* Copyright 2004-2007 Analog Devices Inc.
*
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 66c92bc..1e79ee6 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -173,12 +173,12 @@ void kgdb_put_debug_char(int chr)
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
while (!(UART_GET_LSR(uart) & THRE)) {
- __builtin_bfin_ssync();
+ SSYNC();
}
UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
- __builtin_bfin_ssync();
+ SSYNC();
UART_PUT_CHAR(uart, (unsigned char)chr);
- __builtin_bfin_ssync();
+ SSYNC();
}
int kgdb_get_debug_char(void)
@@ -192,12 +192,12 @@ int kgdb_get_debug_char(void)
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
while(!(UART_GET_LSR(uart) & DR)) {
- __builtin_bfin_ssync();
+ SSYNC();
}
UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
- __builtin_bfin_ssync();
+ SSYNC();
chr = UART_GET_CHAR(uart);
- __builtin_bfin_ssync();
+ SSYNC();
return chr;
}
@@ -1203,7 +1203,7 @@ static int __init bfin_serial_init(void)
IRQF_DISABLED, "BFIN_UART_RX", uart);
pr_info("Request irq for kgdb uart port\n");
UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
- __builtin_bfin_ssync();
+ SSYNC();
t.c_cflag = CS8|B57600;
t.c_iflag = 0;
t.c_oflag = 0;
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index 48587c2..fa4ce61 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -1,17 +1,20 @@
/*
- * File: drivers/spi/bfin5xx_spi.c
- * Based on: N/A
- * Author: Luke Yang (Analog Devices Inc.)
+ * File: drivers/spi/bfin5xx_spi.c
+ * Maintainer:
+ * Bryan Wu <[email protected]>
+ * Original Author:
+ * Luke Yang (Analog Devices Inc.)
*
- * Created: March. 10th 2006
- * Description: SPI controller driver for Blackfin 5xx
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * Created: March. 10th 2006
+ * Description: SPI controller driver for Blackfin BF5xx
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Modified:
* March 10, 2006 bfin5xx_spi.c Created. (Luke Yang)
* August 7, 2006 added full duplex mode (Axel Weiss & Luke Yang)
+ * July 17, 2007 add support for BF54x SPI0 controller (Bryan Wu)
*
- * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2004-2007 Analog Devices Inc.
*
* This program is free software ; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -31,36 +34,34 @@
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/io.h>
#include <linux/ioport.h>
+#include <linux/irq.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/workqueue.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
#include <asm/dma.h>
-
+#include <asm/portmux.h>
#include <asm/bfin5xx_spi.h>
-MODULE_AUTHOR("Luke Yang");
-MODULE_DESCRIPTION("Blackfin 5xx SPI Contoller");
+MODULE_AUTHOR("Bryan Wu, Luke Yang");
+MODULE_DESCRIPTION("Blackfin BF5xx SPI Contoller Driver");
MODULE_LICENSE("GPL");
+#define DRV_NAME "bfin-spi-master"
#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
#define DEFINE_SPI_REG(reg, off) \
static inline u16 read_##reg(void) \
- { return *(volatile unsigned short*)(SPI0_REGBASE + off); } \
+ { return bfin_read16(SPI0_REGBASE + off); } \
static inline void write_##reg(u16 v) \
- {*(volatile unsigned short*)(SPI0_REGBASE + off) = v;\
- SSYNC();}
+ {bfin_write16(SPI0_REGBASE + off, v); }
DEFINE_SPI_REG(CTRL, 0x00)
DEFINE_SPI_REG(FLAG, 0x04)
@@ -125,6 +126,7 @@ struct chip_data {
u16 flag;
u8 chip_select_num;
+ u8 chip_select_requested;
u8 n_bytes;
u8 width; /* 0 or 1 */
u8 enable_dma;
@@ -142,7 +144,6 @@ static void bfin_spi_enable(struct driver_data *drv_data)
cr = read_CTRL();
write_CTRL(cr | BIT_CTL_ENABLE);
- SSYNC();
}
static void bfin_spi_disable(struct driver_data *drv_data)
@@ -151,7 +152,6 @@ static void bfin_spi_disable(struct driver_data *drv_data)
cr = read_CTRL();
write_CTRL(cr & (~BIT_CTL_ENABLE));
- SSYNC();
}
/* Caculate the SPI_BAUD register value based on input HZ */
@@ -179,68 +179,44 @@ static int flush(struct driver_data *drv_data)
return limit;
}
+#define MAX_SPI0_SSEL 7
+
/* stop controller and re-config current chip*/
-static void restore_state(struct driver_data *drv_data)
+static int restore_state(struct driver_data *drv_data)
{
struct chip_data *chip = drv_data->cur_chip;
+ int ret = 0;
+ u16 ssel[MAX_SPI0_SSEL] = {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
+ P_SPI0_SSEL4, P_SPI0_SSEL5,
+ P_SPI0_SSEL6, P_SPI0_SSEL7,};
/* Clear status and disable clock */
write_STAT(BIT_STAT_CLR);
bfin_spi_disable(drv_data);
dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n");
-#if defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
- dev_dbg(&drv_data->pdev->dev,
- "chip select number is %d\n", chip->chip_select_num);
-
- switch (chip->chip_select_num) {
- case 1:
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3c00);
- SSYNC();
- break;
-
- case 2:
- case 3:
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PJSE_SPI);
- SSYNC();
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3800);
- SSYNC();
- break;
+ /* Load the registers */
+ write_CTRL(chip->ctl_reg);
+ write_BAUD(chip->baud);
+ write_FLAG(chip->flag);
- case 4:
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS4E_SPI);
- SSYNC();
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3840);
- SSYNC();
- break;
+ if (!chip->chip_select_requested) {
+ int i = chip->chip_select_num;
- case 5:
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS5E_SPI);
- SSYNC();
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3820);
- SSYNC();
- break;
+ dev_dbg(&drv_data->pdev->dev, "chip select number is %d\n", i);
- case 6:
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS6E_SPI);
- SSYNC();
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3810);
- SSYNC();
- break;
+ if ((i > 0) && (i <= MAX_SPI0_SSEL))
+ ret = peripheral_request(ssel[i-1], DRV_NAME);
- case 7:
- bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PJCE_SPI);
- SSYNC();
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3800);
- SSYNC();
- break;
+ chip->chip_select_requested = 1;
}
-#endif
- /* Load the registers */
- write_CTRL(chip->ctl_reg);
- write_BAUD(chip->baud);
- write_FLAG(chip->flag);
+ if (ret)
+ dev_dbg(&drv_data->pdev->dev,
+ ": request chip select number %d failed\n",
+ chip->chip_select_num);
+
+ return ret;
}
/* used to kick off transfer in rx mode */
@@ -278,7 +254,7 @@ static void null_reader(struct driver_data *drv_data)
static void u8_writer(struct driver_data *drv_data)
{
- dev_dbg(&drv_data->pdev->dev,
+ dev_dbg(&drv_data->pdev->dev,
"cr8-s is 0x%x\n", read_STAT());
while (drv_data->tx < drv_data->tx_end) {
write_TDBR(*(u8 *) (drv_data->tx));
@@ -298,7 +274,6 @@ static void u8_cs_chg_writer(struct driver_data *drv_data)
while (drv_data->tx < drv_data->tx_end) {
write_FLAG(chip->flag);
- SSYNC();
write_TDBR(*(u8 *) (drv_data->tx));
while (read_STAT() & BIT_STAT_TXS)
@@ -306,18 +281,18 @@ static void u8_cs_chg_writer(struct driver_data *drv_data)
while (!(read_STAT() & BIT_STAT_SPIF))
continue;
write_FLAG(0xFF00 | chip->flag);
- SSYNC();
+
if (chip->cs_chg_udelay)
udelay(chip->cs_chg_udelay);
++drv_data->tx;
}
write_FLAG(0xFF00);
- SSYNC();
+
}
static void u8_reader(struct driver_data *drv_data)
{
- dev_dbg(&drv_data->pdev->dev,
+ dev_dbg(&drv_data->pdev->dev,
"cr-8 is 0x%x\n", read_STAT());
/* clear TDBR buffer before read(else it will be shifted out) */
@@ -344,7 +319,6 @@ static void u8_cs_chg_reader(struct driver_data *drv_data)
while (drv_data->rx < drv_data->rx_end) {
write_FLAG(chip->flag);
- SSYNC();
read_RDBR(); /* kick off */
while (!(read_STAT() & BIT_STAT_RXS))
@@ -353,13 +327,13 @@ static void u8_cs_chg_reader(struct driver_data *drv_data)
continue;
*(u8 *) (drv_data->rx) = read_SHAW();
write_FLAG(0xFF00 | chip->flag);
- SSYNC();
+
if (chip->cs_chg_udelay)
udelay(chip->cs_chg_udelay);
++drv_data->rx;
}
write_FLAG(0xFF00);
- SSYNC();
+
}
static void u8_duplex(struct driver_data *drv_data)
@@ -383,7 +357,7 @@ static void u8_cs_chg_duplex(struct driver_data *drv_data)
while (drv_data->rx < drv_data->rx_end) {
write_FLAG(chip->flag);
- SSYNC();
+
write_TDBR(*(u8 *) (drv_data->tx));
while (!(read_STAT() & BIT_STAT_SPIF))
@@ -392,19 +366,19 @@ static void u8_cs_chg_duplex(struct driver_data *drv_data)
continue;
*(u8 *) (drv_data->rx) = read_RDBR();
write_FLAG(0xFF00 | chip->flag);
- SSYNC();
+
if (chip->cs_chg_udelay)
udelay(chip->cs_chg_udelay);
++drv_data->rx;
++drv_data->tx;
}
write_FLAG(0xFF00);
- SSYNC();
+
}
static void u16_writer(struct driver_data *drv_data)
{
- dev_dbg(&drv_data->pdev->dev,
+ dev_dbg(&drv_data->pdev->dev,
"cr16 is 0x%x\n", read_STAT());
while (drv_data->tx < drv_data->tx_end) {
@@ -425,7 +399,6 @@ static void u16_cs_chg_writer(struct driver_data *drv_data)
while (drv_data->tx < drv_data->tx_end) {
write_FLAG(chip->flag);
- SSYNC();
write_TDBR(*(u16 *) (drv_data->tx));
while ((read_STAT() & BIT_STAT_TXS))
@@ -433,13 +406,12 @@ static void u16_cs_chg_writer(struct driver_data *drv_data)
while (!(read_STAT() & BIT_STAT_SPIF))
continue;
write_FLAG(0xFF00 | chip->flag);
- SSYNC();
+
if (chip->cs_chg_udelay)
udelay(chip->cs_chg_udelay);
drv_data->tx += 2;
}
write_FLAG(0xFF00);
- SSYNC();
}
static void u16_reader(struct driver_data *drv_data)
@@ -467,7 +439,6 @@ static void u16_cs_chg_reader(struct driver_data *drv_data)
while (drv_data->rx < drv_data->rx_end) {
write_FLAG(chip->flag);
- SSYNC();
read_RDBR(); /* kick off */
while (!(read_STAT() & BIT_STAT_RXS))
@@ -476,13 +447,12 @@ static void u16_cs_chg_reader(struct driver_data *drv_data)
continue;
*(u16 *) (drv_data->rx) = read_SHAW();
write_FLAG(0xFF00 | chip->flag);
- SSYNC();
+
if (chip->cs_chg_udelay)
udelay(chip->cs_chg_udelay);
drv_data->rx += 2;
}
write_FLAG(0xFF00);
- SSYNC();
}
static void u16_duplex(struct driver_data *drv_data)
@@ -506,7 +476,6 @@ static void u16_cs_chg_duplex(struct driver_data *drv_data)
while (drv_data->tx < drv_data->tx_end) {
write_FLAG(chip->flag);
- SSYNC();
write_TDBR(*(u16 *) (drv_data->tx));
while (!(read_STAT() & BIT_STAT_SPIF))
@@ -515,14 +484,13 @@ static void u16_cs_chg_duplex(struct driver_data *drv_data)
continue;
*(u16 *) (drv_data->rx) = read_RDBR();
write_FLAG(0xFF00 | chip->flag);
- SSYNC();
+
if (chip->cs_chg_udelay)
udelay(chip->cs_chg_udelay);
drv_data->rx += 2;
drv_data->tx += 2;
}
write_FLAG(0xFF00);
- SSYNC();
}
/* test if ther is more transfer to be done */
@@ -817,14 +785,13 @@ static void pump_transfers(unsigned long data)
/* full duplex mode */
BUG_ON((drv_data->tx_end - drv_data->tx) !=
(drv_data->rx_end - drv_data->rx));
- cr = (read_CTRL() & (~BIT_CTL_TIMOD));
+ cr = (read_CTRL() & (~BIT_CTL_TIMOD));
cr |= CFG_SPI_WRITE | (width << 8) |
(CFG_SPI_ENABLE << 14);
dev_dbg(&drv_data->pdev->dev,
"IO duplex: cr is 0x%x\n", cr);
write_CTRL(cr);
- SSYNC();
drv_data->duplex(drv_data);
@@ -835,11 +802,10 @@ static void pump_transfers(unsigned long data)
cr = (read_CTRL() & (~BIT_CTL_TIMOD));
cr |= CFG_SPI_WRITE | (width << 8) |
(CFG_SPI_ENABLE << 14);
- dev_dbg(&drv_data->pdev->dev,
+ dev_dbg(&drv_data->pdev->dev,
"IO write: cr is 0x%x\n", cr);
write_CTRL(cr);
- SSYNC();
drv_data->write(drv_data);
@@ -850,11 +816,10 @@ static void pump_transfers(unsigned long data)
cr = (read_CTRL() & (~BIT_CTL_TIMOD));
cr |= CFG_SPI_READ | (width << 8) |
(CFG_SPI_ENABLE << 14);
- dev_dbg(&drv_data->pdev->dev,
+ dev_dbg(&drv_data->pdev->dev,
"IO read: cr is 0x%x\n", cr);
write_CTRL(cr);
- SSYNC();
drv_data->read(drv_data);
if (drv_data->rx != drv_data->rx_end)
@@ -862,7 +827,7 @@ static void pump_transfers(unsigned long data)
}
if (!tranf_success) {
- dev_dbg(&drv_data->pdev->dev,
+ dev_dbg(&drv_data->pdev->dev,
"IO write error!\n");
message->state = ERROR_STATE;
} else {
@@ -903,6 +868,14 @@ static void pump_messages(struct work_struct *work)
/* Extract head of queue */
drv_data->cur_msg = list_entry(drv_data->queue.next,
struct spi_message, queue);
+
+ /* Setup the SSP using the per chip configuration */
+ drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
+ if (restore_state(drv_data)) {
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ return;
+ };
+
list_del_init(&drv_data->cur_msg->queue);
/* Initial message state */
@@ -910,15 +883,12 @@ static void pump_messages(struct work_struct *work)
drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
struct spi_transfer, transfer_list);
- /* Setup the SSP using the per chip configuration */
- drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
- restore_state(drv_data);
dev_dbg(&drv_data->pdev->dev,
"got a message to pump, state is set to: baud %d, flag 0x%x, ctl 0x%x\n",
- drv_data->cur_chip->baud, drv_data->cur_chip->flag,
- drv_data->cur_chip->ctl_reg);
-
- dev_dbg(&drv_data->pdev->dev,
+ drv_data->cur_chip->baud, drv_data->cur_chip->flag,
+ drv_data->cur_chip->ctl_reg);
+
+ dev_dbg(&drv_data->pdev->dev,
"the first transfer len is %d\n",
drv_data->cur_transfer->len);
@@ -1178,6 +1148,22 @@ static inline int destroy_queue(struct driver_data *drv_data)
return 0;
}
+static int setup_pin_mux(int action)
+{
+
+ u16 pin_req[] = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0};
+
+ if (action) {
+ if (peripheral_request_list(pin_req, DRV_NAME)) {
+ return -EFAULT;
+ }
+ } else {
+ peripheral_free_list(pin_req);
+ }
+
+ return 0;
+}
+
static int __init bfin5xx_spi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1194,6 +1180,12 @@ static int __init bfin5xx_spi_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "can not alloc spi_master\n");
return -ENOMEM;
}
+
+ if (setup_pin_mux(1)) {
+ dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
+ goto out_error;
+ }
+
drv_data = spi_master_get_devdata(master);
drv_data->master = master;
drv_data->master_info = platform_info;
@@ -1227,9 +1219,11 @@ static int __init bfin5xx_spi_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "controller probe successfully\n");
return status;
- out_error_queue_alloc:
+out_error_queue_alloc:
destroy_queue(drv_data);
+out_error:
spi_master_put(master);
+
return status;
}
@@ -1259,6 +1253,8 @@ static int __devexit bfin5xx_spi_remove(struct platform_device *pdev)
/* Disconnect from the SPI framework */
spi_unregister_master(drv_data->master);
+ setup_pin_mux(0);
+
/* Prevent double remove */
platform_set_drvdata(pdev, NULL);
diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index c4d6cbb..a970781 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -61,6 +61,7 @@ extern void bfin_dcache_init(void);
extern int read_iloc(void);
extern int bfin_console_init(void);
extern asmlinkage void lower_to_irq14(void);
+extern void init_exception_vectors(void);
extern void init_dma(void);
extern void program_IAR(void);
extern void evt14_softirq(void);
diff --git a/include/asm-blackfin/bfin5xx_spi.h b/include/asm-blackfin/bfin5xx_spi.h
index 95c1c95..8b211ff 100644
--- a/include/asm-blackfin/bfin5xx_spi.h
+++ b/include/asm-blackfin/bfin5xx_spi.h
@@ -150,6 +150,12 @@
#define CFG_SPI_CS6VALUE 6
#define CFG_SPI_CS7VALUE 7
+#if defined(CONFIG_BF54x)
+#define CH_SPI CH_SPI0
+#define bfin_read_SPI_STAT bfin_read_SPI0_STAT
+#endif
+
+
/* device.platform_data for SSP controller devices */
struct bfin5xx_spi_master {
u16 num_chipselect;
diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h
index 25b934b..5ecf0aa 100644
--- a/include/asm-blackfin/blackfin.h
+++ b/include/asm-blackfin/blackfin.h
@@ -11,78 +11,71 @@
#define HI(con32) (((con32) >> 16) & 0xFFFF)
#define hi(con32) (((con32) >> 16) & 0xFFFF)
-#include <asm/mach/blackfin.h>
-#include <asm/bfin-global.h>
+#include <asm/mach/anomaly.h>
#ifndef __ASSEMBLY__
/* SSYNC implementation for C file */
-#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
-static inline void SSYNC (void)
-{
- int _tmp;
- __asm__ __volatile__ ("cli %0;\n\t"
- "nop;nop;\n\t"
- "ssync;\n\t"
- "sti %0;\n\t"
- :"=d"(_tmp):);
-}
-#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
-static inline void SSYNC (void)
+static inline void SSYNC(void)
{
int _tmp;
- __asm__ __volatile__ ("cli %0;\n\t"
- "ssync;\n\t"
- "sti %0;\n\t"
- :"=d"(_tmp):);
+ if (ANOMALY_05000312 && ANOMALY_05000244)
+ __asm__ __volatile__(
+ "cli %0;"
+ "nop;"
+ "nop;"
+ "ssync;"
+ "sti %0;"
+ : "=d" (_tmp)
+ );
+ else if (ANOMALY_05000312 && !ANOMALY_05000244)
+ __asm__ __volatile__(
+ "cli %0;"
+ "ssync;"
+ "sti %0;"
+ : "=d" (_tmp)
+ );
+ else if (!ANOMALY_05000312 && ANOMALY_05000244)
+ __asm__ __volatile__(
+ "nop;"
+ "nop;"
+ "nop;"
+ "ssync;"
+ );
+ else
+ __asm__ __volatile__("ssync;");
}
-#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
-static inline void SSYNC (void)
-{
- __asm__ __volatile__ ("nop; nop; nop;\n\t"
- "ssync;\n\t"
- ::);
-}
-#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
-static inline void SSYNC (void)
-{
- __asm__ __volatile__ ("ssync;\n\t");
-}
-#endif
/* CSYNC implementation for C file */
-#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
-static inline void CSYNC (void)
+static inline void CSYNC(void)
{
int _tmp;
- __asm__ __volatile__ ("cli %0;\n\t"
- "nop;nop;\n\t"
- "csync;\n\t"
- "sti %0;\n\t"
- :"=d"(_tmp):);
+ if (ANOMALY_05000312 && ANOMALY_05000244)
+ __asm__ __volatile__(
+ "cli %0;"
+ "nop;"
+ "nop;"
+ "csync;"
+ "sti %0;"
+ : "=d" (_tmp)
+ );
+ else if (ANOMALY_05000312 && !ANOMALY_05000244)
+ __asm__ __volatile__(
+ "cli %0;"
+ "csync;"
+ "sti %0;"
+ : "=d" (_tmp)
+ );
+ else if (!ANOMALY_05000312 && ANOMALY_05000244)
+ __asm__ __volatile__(
+ "nop;"
+ "nop;"
+ "nop;"
+ "ssync;"
+ );
+ else
+ __asm__ __volatile__("csync;");
}
-#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
-static inline void CSYNC (void)
-{
- int _tmp;
- __asm__ __volatile__ ("cli %0;\n\t"
- "csync;\n\t"
- "sti %0;\n\t"
- :"=d"(_tmp):);
-}
-#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
-static inline void CSYNC (void)
-{
- __asm__ __volatile__ ("nop; nop; nop;\n\t"
- "ssync;\n\t"
- ::);
-}
-#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
-static inline void CSYNC (void)
-{
- __asm__ __volatile__ ("csync;\n\t");
-}
-#endif
#else /* __ASSEMBLY__ */
@@ -91,19 +84,19 @@ static inline void CSYNC (void)
#define ssync(x) SSYNC(x)
#define csync(x) CSYNC(x)
-#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
+#if ANOMALY_05000312 && ANOMALY_05000244
#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch;
#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch;
-#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
+#elif ANOMALY_05000312 && !ANOMALY_05000244
#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch;
#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch;
-#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
+#elif !ANOMALY_05000312 && ANOMALY_05000244
#define SSYNC(scratch) nop; nop; nop; SSYNC;
#define CSYNC(scratch) nop; nop; nop; CSYNC;
-#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
+#elif !ANOMALY_05000312 && !ANOMALY_05000244
#define SSYNC(scratch) SSYNC;
#define CSYNC(scratch) CSYNC;
@@ -111,4 +104,7 @@ static inline void CSYNC (void)
#endif /* __ASSEMBLY__ */
+#include <asm/mach/blackfin.h>
+#include <asm/bfin-global.h>
+
#endif /* _BLACKFIN_H_ */
diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h
index 7480cfa..dd203cd 100644
--- a/include/asm-blackfin/gpio.h
+++ b/include/asm-blackfin/gpio.h
@@ -144,6 +144,24 @@
#ifdef BF533_FAMILY
#define MAX_BLACKFIN_GPIOS 16
+
+#define GPIO_PF0 0
+#define GPIO_PF1 1
+#define GPIO_PF2 2
+#define GPIO_PF3 3
+#define GPIO_PF4 4
+#define GPIO_PF5 5
+#define GPIO_PF6 6
+#define GPIO_PF7 7
+#define GPIO_PF8 8
+#define GPIO_PF9 9
+#define GPIO_PF10 10
+#define GPIO_PF11 11
+#define GPIO_PF12 12
+#define GPIO_PF13 13
+#define GPIO_PF14 14
+#define GPIO_PF15 15
+
#endif
#ifdef BF537_FAMILY
@@ -421,6 +439,19 @@ unsigned short gpio_get_value(unsigned short gpio);
void gpio_direction_input(unsigned short gpio);
void gpio_direction_output(unsigned short gpio);
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+#include <asm/irq.h>
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return (gpio + GPIO_IRQ_BASE);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return (irq - GPIO_IRQ_BASE);
+}
+
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BLACKFIN_GPIO_H__ */
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
index 7302f29..caea0b0 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -1,247 +1,258 @@
/*
- * File: include/asm-blackfin/mach-bf533/anomaly.h
- * Based on:
- * Author:
+ * File: include/asm-blackfin/mach-bf533/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
- * - Revision U, May 17, 2006; ADSP-BF533 Blackfin Processor Anomaly List
- * - Revision Y, May 17, 2006; ADSP-BF532 Blackfin Processor Anomaly List
- * - Revision T, May 17, 2006; ADSP-BF531 Blackfin Processor Anomaly List
+ * - Revision X, March 23, 2007; ADSP-BF533 Blackfin Processor Anomaly List
+ * - Revision AB, March 23, 2007; ADSP-BF532 Blackfin Processor Anomaly List
+ * - Revision W, March 23, 2007; ADSP-BF531 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
/* We do not support 0.1 or 0.2 silicon - sorry */
-#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2))
-#error Kernel will not work on BF533 Version 0.1 or 0.2
+#if __SILICON_REVISION__ < 3
+# error Kernel will not work on BF533 silicon version 0.0, 0.1, or 0.2
#endif
-/* Issues that are common to 0.5, 0.4, and 0.3 silicon */
-#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) \
- || defined(CONFIG_BF_REV_0_3))
-#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
- slot1 and store of a P register in slot 2 is not
- supported */
-#define ANOMALY_05000105 /* Watchpoint Status Register (WPSTAT) bits are set on
- every corresponding match */
-#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
- Channel DMA stops */
-#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
- registers. */
-#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
- upper bits*/
-#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */
-#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
- syncs */
-#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not
- functional */
-#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable
- state */
-#define ANOMALY_05000229 /* SPI Slave Boot Mode modifies registers */
-#define ANOMALY_05000272 /* Certain data cache write through modes fail for
- VDDint <=0.9V */
-#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */
-#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
- an edge is detected may clear interrupt */
-#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
- DMA system instability */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
- not restored */
-#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
- control */
-#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
- killed in a particular stage*/
-#define ANOMALY_05000311 /* Erroneous flag pin operations under specific
- sequences */
-#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
- registers are interrupted */
-#define ANOMALY_05000313 /* PPI Is Level-Sensitive on First Transfer */
-#define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously On
- * Next System MMR Access */
-#define ANOMALY_05000319 /* Internal Voltage Regulator Values of 1.05V, 1.10V
- * and 1.15V Not Allowed for LQFP Packages */
-#endif /* Issues that are common to 0.5, 0.4, and 0.3 silicon */
+#if defined(__ADSPBF531__)
+# define ANOMALY_BF531 1
+#else
+# define ANOMALY_BF531 0
+#endif
+#if defined(__ADSPBF532__)
+# define ANOMALY_BF532 1
+#else
+# define ANOMALY_BF532 0
+#endif
+#if defined(__ADSPBF533__)
+# define ANOMALY_BF533 1
+#else
+# define ANOMALY_BF533 0
+#endif
-/* These issues only occur on 0.3 or 0.4 BF533 */
-#if (defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3))
-#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not
- updated at the same time. */
-#define ANOMALY_05000158 /* Boot fails when data cache enabled: Data from a Data
- Cache Fill can be corrupted after or during
- Instruction DMA if certain core stalls exist */
-#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General
- Purpose TX or RX modes */
-#define ANOMALY_05000198 /* Failing SYSTEM MMR accesses when stalled by
- preceding memory read */
-#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during
- inactive channels in certain conditions */
-#define ANOMALY_05000202 /* Possible infinite stall with specific dual dag
- situation */
-#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */
-#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */
-#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect
- data*/
-#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate
- Differences in certain Conditions */
-#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */
-#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to
- hardware reset */
-#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or
- IDLE around a Change of Control causes
- unpredictable results */
-#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the
- shadow of a conditional branch */
-#define ANOMALY_05000246 /* Data CPLB's should prevent spurious hardware
- errors */
-#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
-#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
- interrupt not functional */
-#define ANOMALY_05000257 /* An interrupt or exception during short Hardware
- loops may cause the instruction fetch unit to
- malfunction */
-#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of
- the ICPLB Data registers differ */
-#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
-#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
-#define ANOMALY_05000262 /* Stores to data cache may be lost */
-#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */
-#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE
- instruction will cause an infinite stall in the
- second to last instruction in a hardware loop */
-#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
- SPORT external receive and transmit clocks. */
-#define ANOMALY_05000269 /* High I/O activity causes the output voltage of the
- internal voltage regulator (VDDint) to increase. */
-#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
- internal voltage regulator (VDDint) to decrease */
-#endif /* issues only occur on 0.3 or 0.4 BF533 */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
+#define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
+/* Watchpoint Status Register (WPSTAT) Bits Are Set on Every Corresponding Match */
+#define ANOMALY_05000105 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */
+#define ANOMALY_05000158 (__SILICON_REVISION__ < 5)
+/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+#define ANOMALY_05000166 (1)
+/* Turning Serial Ports on with External Frame Syncs */
+#define ANOMALY_05000167 (1)
+/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
+#define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
+#define ANOMALY_05000180 (1)
+/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */
+#define ANOMALY_05000183 (__SILICON_REVISION__ < 4)
+/* False Protection Exceptions */
+#define ANOMALY_05000189 (__SILICON_REVISION__ < 4)
+/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */
+#define ANOMALY_05000193 (__SILICON_REVISION__ < 4)
+/* Restarting SPORT in Specific Modes May Cause Data Corruption */
+#define ANOMALY_05000194 (__SILICON_REVISION__ < 4)
+/* Failing MMR Accesses When Stalled by Preceding Memory Read */
+#define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
+/* Current DMA Address Shows Wrong Value During Carry Fix */
+#define ANOMALY_05000199 (__SILICON_REVISION__ < 4)
+/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */
+#define ANOMALY_05000200 (__SILICON_REVISION__ < 5)
+/* Receive Frame Sync Not Ignored During Active Frames in SPORT Multi-Channel Mode */
+#define ANOMALY_05000201 (__SILICON_REVISION__ < 4)
+/* Possible Infinite Stall with Specific Dual-DAG Situation */
+#define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
+/* Specific Sequence That Can Cause DMA Error or DMA Stopping */
+#define ANOMALY_05000203 (__SILICON_REVISION__ < 4)
+/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */
+#define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533)
+/* Recovery from "Brown-Out" Condition */
+#define ANOMALY_05000207 (__SILICON_REVISION__ < 4)
+/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */
+#define ANOMALY_05000208 (1)
+/* Speed Path in Computational Unit Affects Certain Instructions */
+#define ANOMALY_05000209 (__SILICON_REVISION__ < 4)
+/* UART TX Interrupt Masked Erroneously */
+#define ANOMALY_05000215 (__SILICON_REVISION__ < 5)
+/* NMI Event at Boot Time Results in Unpredictable State */
+#define ANOMALY_05000219 (1)
+/* Incorrect Pulse-Width of UART Start Bit */
+#define ANOMALY_05000225 (__SILICON_REVISION__ < 5)
+/* Scratchpad Memory Bank Reads May Return Incorrect Data */
+#define ANOMALY_05000227 (__SILICON_REVISION__ < 5)
+/* SPI Slave Boot Mode Modifies Registers from Reset Value */
+#define ANOMALY_05000229 (1)
+/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */
+#define ANOMALY_05000230 (__SILICON_REVISION__ < 5)
+/* UART STB Bit Incorrectly Affects Receiver Setting */
+#define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
+/* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */
+#define ANOMALY_05000233 (__SILICON_REVISION__ < 4)
+/* Incorrect Revision Number in DSPID Register */
+#define ANOMALY_05000234 (__SILICON_REVISION__ == 4)
+/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
+#define ANOMALY_05000242 (__SILICON_REVISION__ < 4)
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
+/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Data CPLBs Should Prevent Spurious Hardware Errors */
+#define ANOMALY_05000246 (__SILICON_REVISION__ < 5)
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ == 4)
+/* Maximum External Clock Speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 5)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 4)
+/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
+#define ANOMALY_05000255 (__SILICON_REVISION__ < 5)
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 5)
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
+#define ANOMALY_05000258 (__SILICON_REVISION__ < 5)
+/* ICPLB_STATUS MMR Register May Be Corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ < 5)
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 5)
+/* Stores To Data Cache May Be Lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 5)
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ < 5)
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
+#define ANOMALY_05000269 (__SILICON_REVISION__ < 5)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
+#define ANOMALY_05000270 (__SILICON_REVISION__ < 5)
+/* Spontaneous Reset of Internal Voltage Regulator */
+#define ANOMALY_05000271 (__SILICON_REVISION__ < 4)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* Writes to Synchronous SDRAM Memory May Be Lost */
+#define ANOMALY_05000273 (1)
+/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
+#define ANOMALY_05000276 (1)
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
+#define ANOMALY_05000277 (1)
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
+#define ANOMALY_05000278 (1)
+/* False Hardware Error Exception When ISR Context Is Not Restored */
+#define ANOMALY_05000281 (1)
+/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
+#define ANOMALY_05000282 (1)
+/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+#define ANOMALY_05000283 (1)
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
+#define ANOMALY_05000288 (1)
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
+#define ANOMALY_05000301 (1)
+/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+#define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
+/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
+/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
+#define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
+#define ANOMALY_05000311 (1)
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* PPI Is Level-Sensitive on First Transfer */
+#define ANOMALY_05000313 (1)
+/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+#define ANOMALY_05000315 (1)
+/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
+#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
-/* These issues are only on 0.4 silicon */
-#if (defined(CONFIG_BF_REV_0_4))
-#define ANOMALY_05000234 /* Incorrect Revision Number in DSPID Register */
-#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
- (TDM) */
-#endif /* issues are only on 0.4 silicon */
+/* These anomalies have been "phased" out of analog.com anomaly sheets and are
+ * here to show running on older silicon just isn't feasible.
+ */
-/* These issues are only on 0.3 silicon */
-#if defined(CONFIG_BF_REV_0_3)
-#define ANOMALY_05000183 /* Timer Pin limitations for PPI TX Modes with
- External Frame Syncs */
-#define ANOMALY_05000189 /* False Protection Exceptions caused by Speculative
- Instruction or Data Fetches, or by Fetches at the
- boundary of reserved memory space */
-#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs
- when polarity setting is changed */
-#define ANOMALY_05000194 /* Sport Restarting in specific modes may cause data
- corruption */
-#define ANOMALY_05000199 /* DMA current address shows wrong value during carry
- fix */
-#define ANOMALY_05000201 /* Receive frame sync not ignored during active
- frames in sport MCM */
-#define ANOMALY_05000203 /* Specific sequence that can cause DMA error or DMA
- stopping */
-#if defined(CONFIG_BF533)
-#define ANOMALY_05000204 /* Incorrect data read with write-through cache and
- allocate cache lines on reads only mode */
-#endif /* CONFIG_BF533 */
-#define ANOMALY_05000207 /* Recovery from "brown-out" condition */
-#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain
- instructions */
-#define ANOMALY_05000233 /* PPI_FS3 is not driven in 2 or 3 internal Frame
- Sync Transmit Mode */
-#define ANOMALY_05000271 /* Spontaneous reset of Internal Voltage Regulator */
-#endif /* only on 0.3 silicon */
+/* Watchpoints (Hardware Breakpoints) are not supported */
+#define ANOMALY_05000067 (__SILICON_REVISION__ < 3)
+/* Reserved bits in SYSCFG register not set at power on */
+#define ANOMALY_05000109 (__SILICON_REVISION__ < 3)
+/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
+#define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
+/* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */
+#define ANOMALY_05000123 (__SILICON_REVISION__ < 3)
+/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
+#define ANOMALY_05000124 (__SILICON_REVISION__ < 3)
+/* Erroneous exception when enabling cache */
+#define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
+/* SPI clock polarity and phase bits incorrect during booting */
+#define ANOMALY_05000126 (__SILICON_REVISION__ < 3)
+/* DMEM_CONTROL is not set on Reset */
+#define ANOMALY_05000137 (__SILICON_REVISION__ < 3)
+/* SPI boot will not complete if there is a zero fill block in the loader file */
+#define ANOMALY_05000138 (__SILICON_REVISION__ < 3)
+/* Allowing the SPORT RX FIFO to fill will cause an overflow */
+#define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
+/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
+#define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
+/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
+#define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
+/* A read from external memory may return a wrong value with data cache enabled */
+#define ANOMALY_05000143 (__SILICON_REVISION__ < 3)
+/* DMA and TESTSET conflict when both are accessing external memory */
+#define ANOMALY_05000144 (__SILICON_REVISION__ < 3)
+/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */
+#define ANOMALY_05000145 (__SILICON_REVISION__ < 3)
+/* MDMA may lose the first few words of a descriptor chain */
+#define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
+/* The source MDMA descriptor may stop with a DMA Error */
+#define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
+/* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */
+#define ANOMALY_05000148 (__SILICON_REVISION__ < 3)
+/* Frame Delay in SPORT Multichannel Mode */
+#define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
+/* SPORT TFS signal is active in Multi-channel mode outside of valid channels */
+#define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
+/* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */
+#define ANOMALY_05000155 (__SILICON_REVISION__ < 3)
+/* A killed 32-bit System MMR write will lead to the next system MMR access thinking it should be 32-bit. */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
+/* SPORT transmit data is not gated by external frame sync in certain conditions */
+#define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
+/* SDRAM auto-refresh and subsequent Power Ups */
+#define ANOMALY_05000168 (__SILICON_REVISION__ < 3)
+/* DATA CPLB page miss can result in lost write-through cache data writes */
+#define ANOMALY_05000169 (__SILICON_REVISION__ < 3)
+/* DMA vs Core accesses to external memory */
+#define ANOMALY_05000173 (__SILICON_REVISION__ < 3)
+/* Cache Fill Buffer Data lost */
+#define ANOMALY_05000174 (__SILICON_REVISION__ < 3)
+/* Overlapping Sequencer and Memory Stalls */
+#define ANOMALY_05000175 (__SILICON_REVISION__ < 3)
+/* Multiplication of (-1) by (-1) followed by an accumulator saturation */
+#define ANOMALY_05000176 (__SILICON_REVISION__ < 3)
+/* Disabling the PPI resets the PPI configuration registers */
+#define ANOMALY_05000181 (__SILICON_REVISION__ < 3)
+/* PPI TX Mode with 2 External Frame Syncs */
+#define ANOMALY_05000185 (__SILICON_REVISION__ < 3)
+/* PPI does not invert the Driving PPICLK edge in Transmit Modes */
+#define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
+/* In PPI Transmit Modes with External Frame Syncs POLC */
+#define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
+/* Internal Voltage Regulator may not start up */
+#define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
-#if defined(CONFIG_BF_REV_0_2)
-#define ANOMALY_05000067 /* Watchpoints (Hardware Breakpoints) are not
- * supported */
-#define ANOMALY_05000109 /* Reserved bits in SYSCFG register not set at
- * power on */
-#define ANOMALY_05000116 /* Trace Buffers may record discontinuities into
- * emulation mode and/or exception, NMI, reset
- * handlers */
-#define ANOMALY_05000123 /* DTEST_COMMAND initiated memory access may be
- * incorrect if data cache or DMA is active */
-#define ANOMALY_05000124 /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1,
- * or 1:1 */
-#define ANOMALY_05000125 /* Erroneous exception when enabling cache */
-#define ANOMALY_05000126 /* SPI clock polarity and phase bits incorrect
- * during booting */
-#define ANOMALY_05000137 /* DMEM_CONTROL is not set on Reset */
-#define ANOMALY_05000138 /* SPI boot will not complete if there is a zero fill
- * block in the loader file */
-#define ANOMALY_05000140 /* Allowing the SPORT RX FIFO to fill will cause an
- * overflow */
-#define ANOMALY_05000141 /* An Infinite Stall occurs with a particular sequence
- * of consecutive dual dag events */
-#define ANOMALY_05000142 /* Interrupts may be lost when a programmable input
- * flag is configured to be edge sensitive */
-#define ANOMALY_05000143 /* A read from external memory may return a wrong
- * value with data cache enabled */
-#define ANOMALY_05000144 /* DMA and TESTSET conflict when both are accessing
- * external memory */
-#define ANOMALY_05000145 /* In PWM_OUT mode, you must enable the PPI block to
- * generate a waveform from PPI_CLK */
-#define ANOMALY_05000146 /* MDMA may lose the first few words of a descriptor
- * chain */
-#define ANOMALY_05000147 /* The source MDMA descriptor may stop with a DMA
- * Error */
-#define ANOMALY_05000148 /* When booting from a 16-bit asynchronous memory
- * device, the upper 8-bits of each word must be
- * 0x00 */
-#define ANOMALY_05000153 /* Frame Delay in SPORT Multichannel Mode */
-#define ANOMALY_05000154 /* SPORT TFS signal is active in Multi-channel mode
- * outside of valid channels */
-#define ANOMALY_05000155 /* Timer1 can not be used for PWMOUT mode when a
- * certain PPI mode is in use */
-#define ANOMALY_05000157 /* A killed 32-bit System MMR write will lead to
- * the next system MMR access thinking it should be
- * 32-bit. */
-#define ANOMALY_05000163 /* SPORT transmit data is not gated by external frame
- * sync in certain conditions */
-#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */
-#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost
- * write-through cache data writes */
-#define ANOMALY_05000173 /* DMA vs Core accesses to external memory */
-#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */
-#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */
-#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an
- * accumulator saturation */
-#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration
- * registers */
-#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */
-#define ANOMALY_05000191 /* PPI does not invert the Driving PPICLK edge in
- * Transmit Modes */
-#define ANOMALY_05000192 /* In PPI Transmit Modes with External Frame Syncs
- * POLC */
-#define ANOMALY_05000206 /* Internal Voltage Regulator may not start up */
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000266 (0)
#endif
-
-#endif /* _MACH_ANOMALY_H_ */
diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/include/asm-blackfin/mach-bf533/bf533.h
index 185fc12..41e4e83 100644
--- a/include/asm-blackfin/mach-bf533/bf533.h
+++ b/include/asm-blackfin/mach-bf533/bf533.h
@@ -226,7 +226,7 @@
#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
#endif
-#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1)
+#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1)
#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK
#endif
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index e043caf..69b9f8e 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -1,5 +1,6 @@
#include <linux/serial.h>
#include <asm/dma.h>
+#include <asm/portmux.h>
#define NR_PORTS 1
@@ -92,18 +93,24 @@ struct bfin_serial_res bfin_serial_resource[] = {
}
};
+#define DRIVER_NAME "bfin-uart"
int nr_ports = NR_PORTS;
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ peripheral_request(P_UART0_TX, DRIVER_NAME);
+ peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0) {
- gpio_request(uart->cts_pin, NULL);
+ gpio_request(uart->cts_pin, DRIVER_NAME);
gpio_direction_input(uart->cts_pin);
}
if (uart->rts_pin >= 0) {
- gpio_request(uart->rts_pin, NULL);
+ gpio_request(uart->rts_pin, DRIVER_NAME);
gpio_direction_input(uart->rts_pin);
}
#endif
diff --git a/include/asm-blackfin/mach-bf533/blackfin.h b/include/asm-blackfin/mach-bf533/blackfin.h
index e438449..f3b240a 100644
--- a/include/asm-blackfin/mach-bf533/blackfin.h
+++ b/include/asm-blackfin/mach-bf533/blackfin.h
@@ -38,7 +38,7 @@
#include "defBF532.h"
#include "anomaly.h"
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
#include "cdefBF532.h"
#endif
diff --git a/include/asm-blackfin/mach-bf533/cdefBF532.h b/include/asm-blackfin/mach-bf533/cdefBF532.h
index 74f967b..40c1ad3 100644
--- a/include/asm-blackfin/mach-bf533/cdefBF532.h
+++ b/include/asm-blackfin/mach-bf533/cdefBF532.h
@@ -30,11 +30,9 @@
#ifndef _CDEF_BF532_H
#define _CDEF_BF532_H
-/*
-#if !defined(__ADSPLPBLACKFIN__)
-#warning cdefBF532.h should only be included for 532 compatible chips.
-#endif
-*/
+
+#include <asm/blackfin.h>
+
/*include all Core registers and bit definitions*/
#include "defBF532.h"
@@ -65,7 +63,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
bfin_write32(SIC_IWR, IWR_ENABLE(0));
bfin_write16(VR_CTL, val);
- __builtin_bfin_ssync();
+ SSYNC();
local_irq_save(flags);
asm("IDLE;");
diff --git a/include/asm-blackfin/mach-bf533/irq.h b/include/asm-blackfin/mach-bf533/irq.h
index 9879e68..452fb82 100644
--- a/include/asm-blackfin/mach-bf533/irq.h
+++ b/include/asm-blackfin/mach-bf533/irq.h
@@ -128,6 +128,8 @@ Core Emulation **
#define IRQ_PF14 47
#define IRQ_PF15 48
+#define GPIO_IRQ_BASE IRQ_PF0
+
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PF15+1)
#else
diff --git a/include/asm-blackfin/mach-bf533/portmux.h b/include/asm-blackfin/mach-bf533/portmux.h
index b88d7a0..137f488 100644
--- a/include/asm-blackfin/mach-bf533/portmux.h
+++ b/include/asm-blackfin/mach-bf533/portmux.h
@@ -42,7 +42,7 @@
#define P_SPORT0_DRPRI (P_DONTCARE)
#define P_SPI0_MOSI (P_DONTCARE)
-#define P_SPI0_MIS0 (P_DONTCARE)
+#define P_SPI0_MISO (P_DONTCARE)
#define P_SPI0_SCK (P_DONTCARE)
#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF7))
#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF6))
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
index 4453e61..dc736c6 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -1,139 +1,143 @@
-
/*
- * File: include/asm-blackfin/mach-bf537/anomaly.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
+ * File: include/asm-blackfin/mach-bf537/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
- * - Revision J, June 1, 2006; ADSP-BF537 Blackfin Processor Anomaly List
- * - Revision I, June 1, 2006; ADSP-BF536 Blackfin Processor Anomaly List
- * - Revision J, June 1, 2006; ADSP-BF534 Blackfin Processor Anomaly List
+ * - Revision M, March 13, 2007; ADSP-BF537 Blackfin Processor Anomaly List
+ * - Revision L, March 13, 2007; ADSP-BF536 Blackfin Processor Anomaly List
+ * - Revision M, March 13, 2007; ADSP-BF534 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
/* We do not support 0.1 silicon - sorry */
-#if (defined(CONFIG_BF_REV_0_1))
-#error Kernel will not work on BF537/6/4 Version 0.1
+#if __SILICON_REVISION__ < 2
+# error Kernel will not work on BF537 silicon version 0.0 or 0.1
#endif
-#if (defined(CONFIG_BF_REV_0_3) || defined(CONFIG_BF_REV_0_2))
-#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
- slot1 and store of a P register in slot 2 is not
- supported */
-#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
- Channel DMA stops */
-#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
- registers. */
-#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
- upper bits*/
-#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
- syncs */
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
-#define ANOMALY_05000247 /* CLKIN Buffer Output Enable Reset Behavior Is
- Changed */
-#endif
-#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
- SPORT external receive and transmit clocks. */
-#define ANOMALY_05000272 /* Certain data cache write through modes fail for
- VDDint <=0.9V */
-#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */
-#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
- an edge is detected may clear interrupt */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
- not restored */
-#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
- control */
-#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
- killed in a particular stage*/
-#define ANOMALY_05000310 /* False hardware errors caused by fetches at the
- * boundary of reserved memory */
-#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
- registers are interrupted */
-#define ANOMALY_05000313 /* PPI is level sensitive on first transfer */
-#define ANOMALY_05000322 /* EMAC RMII mode at 10-Base-T speed: RX frames not
- * received properly */
+#if defined(__ADSPBF534__)
+# define ANOMALY_BF534 1
+#else
+# define ANOMALY_BF534 0
#endif
-
-#if defined(CONFIG_BF_REV_0_2)
-#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or
- IDLE around a Change of Control causes
- unpredictable results */
-#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
- (TDM) */
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
-#define ANOMALY_05000252 /* EMAC Tx DMA error after an early frame abort */
+#if defined(__ADSPBF536__)
+# define ANOMALY_BF536 1
+#else
+# define ANOMALY_BF536 0
#endif
-#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
-#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
- interrupt not functional */
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
-#define ANOMALY_05000256 /* EMAC MDIO input latched on wrong MDC edge */
+#if defined(__ADSPBF537__)
+# define ANOMALY_BF537 1
+#else
+# define ANOMALY_BF537 0
#endif
-#define ANOMALY_05000257 /* An interrupt or exception during short Hardware
- loops may cause the instruction fetch unit to
- malfunction */
-#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of
- the ICPLB Data registers differ */
-#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
-#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
-#define ANOMALY_05000262 /* Stores to data cache may be lost */
-#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */
-#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE
- instruction will cause an infinite stall in the
- second to last instruction in a hardware loop */
-#define ANOMALY_05000268 /* Memory DMA error when peripheral DMA is running
- and non-zero DEB_TRAFFIC_PERIOD value */
-#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
- internal voltage regulator (VDDint) to decrease */
-#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
- an edge is detected may clear interrupt */
-#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
- DMA system instability */
-#define ANOMALY_05000280 /* SPI Master boot mode does not work well with
- Atmel Dataflash devices */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context
- * is not restored */
-#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
- * control */
-#define ANOMALY_05000283 /* System MMR Write Is Stalled Indefinitely When
- * Killed in a Particular Stage */
-#define ANOMALY_05000285 /* New Feature: EMAC TX DMA Word Alignment
- * (Not Available On Older Silicon) */
-#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */
-#define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously
- * On Next System MMR Access */
-#define ANOMALY_05000316 /* EMAC RMII mode: collisions occur in Full Duplex
- * mode */
-#define ANOMALY_05000321 /* EMAC RMII mode: TX frames in half duplex fail with
- * status No Carrier */
-#endif /* CONFIG_BF_REV_0_2 */
-#endif /* _MACH_ANOMALY_H_ */
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN bit is not valid after a Peripheral Receive Channel DMA stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H cannot be used to access 16-bit System MMR registers */
+#define ANOMALY_05000122 (1)
+/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
+/* PPI Data Lengths Between 8 and 16 do not zero out upper bits*/
+#define ANOMALY_05000166 (1) /* XXX: deleted from BF537 sheet ? */
+/* PPI_DELAY not functional in PPI modes with 0 frame syncs */
+#define ANOMALY_05000180 (1)
+/* Instruction Cache Is Not Functional */
+#define ANOMALY_05000237 (__SILICON_REVISION__ < 2)
+/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
+/* Spurious Hardware Error from an access in the shadow of a conditional branch */
+#define ANOMALY_05000245 (1)
+/* CLKIN Buffer Output Enable Reset Behavior Is Changed */
+#define ANOMALY_05000247 (1)
+/* Incorrect Bit-Shift of Data Word in Multichannel (TDM) mode in certain conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ < 3)
+/* EMAC Tx DMA error after an early frame abort */
+#define ANOMALY_05000252 (__SILICON_REVISION__ < 3)
+/* Maximum external clock speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 3)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT mode with external clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 2)
+/* Entering Hibernate Mode with RTC Seconds event interrupt not functional */
+#define ANOMALY_05000255 (__SILICON_REVISION__ < 3)
+/* EMAC MDIO input latched on wrong MDC edge */
+#define ANOMALY_05000256 (__SILICON_REVISION__ < 3)
+/* Interrupt/Exception during short hardware loop may cause bad instruction fetches */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 3)
+/* Instruction Cache is corrupted when bits 9 and 12 of the ICPLB Data registers differ */
+#define ANOMALY_05000258 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ == 1) || __SILICON_REVISION__ == 2)
+/* ICPLB_STATUS MMR register may be corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ == 2)
+/* DCPLB_FAULT_ADDR MMR register may be corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 3)
+/* Stores to data cache may be lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 3)
+/* Hardware loop corrupted when taking an ICPLB exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ == 2)
+/* CSYNC/SSYNC/IDLE causes infinite stall in second to last instruction in hardware loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 3)
+/* Sensitivity to noise with slow input edge rates on external SPORT TX and RX clocks */
+#define ANOMALY_05000265 (1)
+/* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */
+#define ANOMALY_05000268 (__SILICON_REVISION__ < 3)
+/* High I/O activity causes output voltage of internal voltage regulator (VDDint) to decrease */
+#define ANOMALY_05000270 (__SILICON_REVISION__ < 3)
+/* Certain data cache write through modes fail for VDDint <=0.9V */
+#define ANOMALY_05000272 (1)
+/* Writes to Synchronous SDRAM memory may be lost */
+#define ANOMALY_05000273 (__SILICON_REVISION__ < 3)
+/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */
+#define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
+/* Disabling Peripherals with DMA running may cause DMA system instability */
+#define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2))
+/* SPI Master boot mode does not work well with Atmel Data flash devices */
+#define ANOMALY_05000280 (1)
+/* False Hardware Error Exception when ISR context is not restored */
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 3)
+/* Memory DMA corruption with 32-bit data and traffic control */
+#define ANOMALY_05000282 (__SILICON_REVISION__ < 3)
+/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+#define ANOMALY_05000283 (__SILICON_REVISION__ < 3)
+/* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */
+#define ANOMALY_05000285 (__SILICON_REVISION__ < 3)
+/* SPORTs may receive bad data if FIFOs fill up */
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 3)
+/* Memory to memory DMA source/destination descriptors must be in same memory space */
+#define ANOMALY_05000301 (1)
+/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
+#define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
+/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
+/* Writing UART_THR while UART clock is disabled sends erroneous start bit */
+#define ANOMALY_05000309 (__SILICON_REVISION__ < 3)
+/* False hardware errors caused by fetches at the boundary of reserved memory */
+#define ANOMALY_05000310 (1)
+/* Errors when SSYNC, CSYNC, or loads to LT, LB and LC registers are interrupted */
+#define ANOMALY_05000312 (1)
+/* PPI is level sensitive on first transfer */
+#define ANOMALY_05000313 (1)
+/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+#define ANOMALY_05000315 (__SILICON_REVISION__ < 3)
+/* EMAC RMII mode: collisions occur in Full Duplex mode */
+#define ANOMALY_05000316 (__SILICON_REVISION__ < 3)
+/* EMAC RMII mode: TX frames in half duplex fail with status No Carrier */
+#define ANOMALY_05000321 (__SILICON_REVISION__ < 3)
+/* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */
+#define ANOMALY_05000322 (1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000311 (0)
+
+#endif
diff --git a/include/asm-blackfin/mach-bf537/bf537.h b/include/asm-blackfin/mach-bf537/bf537.h
index b8924cd..04b0816 100644
--- a/include/asm-blackfin/mach-bf537/bf537.h
+++ b/include/asm-blackfin/mach-bf537/bf537.h
@@ -206,7 +206,7 @@
#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
#endif
-#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1)
+#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1)
#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK
#endif
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index 8f5d9c4..6fb328f 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -1,5 +1,6 @@
#include <linux/serial.h>
#include <asm/dma.h>
+#include <asm/portmux.h>
#define NR_PORTS 2
@@ -122,25 +123,29 @@ struct bfin_serial_res bfin_serial_resource[] = {
int nr_ports = ARRAY_SIZE(bfin_serial_resource);
+#define DRIVER_NAME "bfin-uart"
+
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
- unsigned short val;
- val = bfin_read16(BFIN_PORT_MUX);
- val &= ~(PFDE | PFTE);
- bfin_write16(BFIN_PORT_MUX, val);
- val = bfin_read16(PORTF_FER);
- val |= 0xF;
- bfin_write16(PORTF_FER, val);
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ peripheral_request(P_UART0_TX, DRIVER_NAME);
+ peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ peripheral_request(P_UART1_TX, DRIVER_NAME);
+ peripheral_request(P_UART1_RX, DRIVER_NAME);
+#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0) {
- gpio_request(uart->cts_pin, NULL);
+ gpio_request(uart->cts_pin, DRIVER_NAME);
gpio_direction_input(uart->cts_pin);
}
if (uart->rts_pin >= 0) {
- gpio_request(uart->rts_pin, NULL);
+ gpio_request(uart->rts_pin, DRIVER_NAME);
gpio_direction_output(uart->rts_pin);
}
#endif
diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/include/asm-blackfin/mach-bf537/blackfin.h
index bbd9705..f196588 100644
--- a/include/asm-blackfin/mach-bf537/blackfin.h
+++ b/include/asm-blackfin/mach-bf537/blackfin.h
@@ -43,7 +43,7 @@
#include "defBF537.h"
#endif
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
#include "cdefBF534.h"
/* UART 0*/
diff --git a/include/asm-blackfin/mach-bf537/cdefBF534.h b/include/asm-blackfin/mach-bf537/cdefBF534.h
index 84e58fa..78227bc 100644
--- a/include/asm-blackfin/mach-bf537/cdefBF534.h
+++ b/include/asm-blackfin/mach-bf537/cdefBF534.h
@@ -32,6 +32,8 @@
#ifndef _CDEF_BF534_H
#define _CDEF_BF534_H
+#include <asm/blackfin.h>
+
/* Include all Core registers and bit definitions */
#include "defBF534.h"
@@ -57,7 +59,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
bfin_write32(SIC_IWR, IWR_ENABLE(0));
bfin_write16(VR_CTL, val);
- __builtin_bfin_ssync();
+ SSYNC();
local_irq_save(flags);
asm("IDLE;");
diff --git a/include/asm-blackfin/mach-bf537/irq.h b/include/asm-blackfin/mach-bf537/irq.h
index 8af2a83..36c44bc 100644
--- a/include/asm-blackfin/mach-bf537/irq.h
+++ b/include/asm-blackfin/mach-bf537/irq.h
@@ -160,6 +160,8 @@ Core Emulation **
#define IRQ_PH14 96
#define IRQ_PH15 97
+#define GPIO_IRQ_BASE IRQ_PF0
+
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PH15+1)
#else
diff --git a/include/asm-blackfin/mach-bf537/portmux.h b/include/asm-blackfin/mach-bf537/portmux.h
index 23e13c5..ae6c53b 100644
--- a/include/asm-blackfin/mach-bf537/portmux.h
+++ b/include/asm-blackfin/mach-bf537/portmux.h
@@ -106,4 +106,37 @@
#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(2))
-#endif /* _MACH_PORTMUX_H_ */
+#define P_MII0 {\
+ P_MII0_ETxD0, \
+ P_MII0_ETxD1, \
+ P_MII0_ETxD2, \
+ P_MII0_ETxD3, \
+ P_MII0_ETxEN, \
+ P_MII0_TxCLK, \
+ P_MII0_PHYINT, \
+ P_MII0_COL, \
+ P_MII0_ERxD0, \
+ P_MII0_ERxD1, \
+ P_MII0_ERxD2, \
+ P_MII0_ERxD3, \
+ P_MII0_ERxDV, \
+ P_MII0_ERxCLK, \
+ P_MII0_ERxER, \
+ P_MII0_CRS, \
+ P_MDC, \
+ P_MDIO, 0}
+
+
+#define P_RMII0 {\
+ P_MII0_ETxD0, \
+ P_MII0_ETxD1, \
+ P_MII0_ETxEN, \
+ P_MII0_ERxD0, \
+ P_MII0_ERxD1, \
+ P_MII0_ERxER, \
+ P_RMII0_REF_CLK, \
+ P_RMII0_MDINT, \
+ P_RMII0_CRS_DV, \
+ P_MDC, \
+ P_MDIO, 0}
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index aca1d4b..37e0bd2 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -1,74 +1,70 @@
-
/*
- * File: include/asm-blackfin/mach-bf548/anomaly.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * File: include/asm-blackfin/mach-bf548/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+/* This file shoule be up to date with:
+ * - Revision B, April 6, 2007; ADSP-BF549 Silicon Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
-#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
- slot1 and store of a P register in slot 2 is not
- supported */
-#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
- Channel DMA stops */
-#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
- registers. */
-#define ANOMALY_05000245 /* Spurious Hardware Error from an Access in the
- Shadow of a Conditional Branch */
-#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
- interrupt not functional */
-#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
- SPORT external receive and transmit clocks. */
-#define ANOMALY_05000272 /* Certain data cache write through modes fail for
- VDDint <=0.9V */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
- not restored */
-#define ANOMALY_05000310 /* False Hardware Errors Caused by Fetches at the
- Boundary of Reserved Memory */
-#define ANOMALY_05000312 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and
- LC Registers Are Interrupted */
-#define ANOMALY_05000324 /* TWI Slave Boot Mode Is Not Functional */
-#define ANOMALY_05000325 /* External FIFO Boot Mode Is Not Functional */
-#define ANOMALY_05000327 /* Data Lost When Core and DMA Accesses Are Made to
- the USB FIFO Simultaneously */
-#define ANOMALY_05000328 /* Incorrect Access of OTP_STATUS During otp_write()
- function */
-#define ANOMALY_05000329 /* Synchronous Burst Flash Boot Mode Is Not Functional
- */
-#define ANOMALY_05000330 /* Host DMA Boot Mode Is Not Functional */
-#define ANOMALY_05000334 /* Inadequate Timing Margins on DDR DQS to DQ and DQM
- Skew */
-#define ANOMALY_05000335 /* Inadequate Rotary Debounce Logic Duration */
-#define ANOMALY_05000336 /* Phantom Interrupt Occurs After First Configuration
- of Host DMA Port */
-#define ANOMALY_05000337 /* Disallowed Configuration Prevents Subsequent
- Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000338 /* Slave-Mode SPI0 MISO Failure With CPHA = 0 */
-#endif /* _MACH_ANOMALY_H_ */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
+#define ANOMALY_05000255 (1)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (1)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* False Hardware Error Exception when ISR context is not restored */
+#define ANOMALY_05000281 (1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* TWI Slave Boot Mode Is Not Functional */
+#define ANOMALY_05000324 (1)
+/* External FIFO Boot Mode Is Not Functional */
+#define ANOMALY_05000325 (1)
+/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
+#define ANOMALY_05000327 (1)
+/* Incorrect Access of OTP_STATUS During otp_write() Function */
+#define ANOMALY_05000328 (1)
+/* Synchronous Burst Flash Boot Mode Is Not Functional */
+#define ANOMALY_05000329 (1)
+/* Host DMA Boot Mode Is Not Functional */
+#define ANOMALY_05000330 (1)
+/* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */
+#define ANOMALY_05000334 (1)
+/* Inadequate Rotary Debounce Logic Duration */
+#define ANOMALY_05000335 (1)
+/* Phantom Interrupt Occurs After First Configuration of Host DMA Port */
+#define ANOMALY_05000336 (1)
+/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
+#define ANOMALY_05000337 (1)
+/* Slave-Mode SPI0 MISO Failure With CPHA = 0 */
+#define ANOMALY_05000338 (1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000244 (0)
+#define ANOMALY_05000261 (0)
+#define ANOMALY_05000263 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000311 (0)
+
+#endif
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 2f4afc9..f21a162 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -1,5 +1,6 @@
#include <linux/serial.h>
#include <asm/dma.h>
+#include <asm/portmux.h>
#define NR_PORTS 4
@@ -143,50 +144,48 @@ struct bfin_serial_res bfin_serial_resource[] = {
int nr_ports = ARRAY_SIZE(bfin_serial_resource);
+#define DRIVER_NAME "bfin-uart"
+
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
#ifdef CONFIG_SERIAL_BFIN_UART0
- /* Enable UART0 RX and TX on pin 7 & 8 of PORT E */
- bfin_write_PORTE_FER(0x180 | bfin_read_PORTE_FER());
- bfin_write_PORTE_MUX(0x3C000 | bfin_read_PORTE_MUX());
+ peripheral_request(P_UART0_TX, DRIVER_NAME);
+ peripheral_request(P_UART0_RX, DRIVER_NAME);
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
- /* Enable UART1 RX and TX on pin 0 & 1 of PORT H */
- bfin_write_PORTH_FER(0x3 | bfin_read_PORTH_FER());
- bfin_write_PORTH_MUX(~0xF & bfin_read_PORTH_MUX());
+ peripheral_request(P_UART1_TX, DRIVER_NAME);
+ peripheral_request(P_UART1_RX, DRIVER_NAME);
+
#ifdef CONFIG_BFIN_UART1_CTSRTS
- /* Enable UART1 RTS and CTS on pin 9 & 10 of PORT E */
- bfin_write_PORTE_FER(0x600 | bfin_read_PORTE_FER());
- bfin_write_PORTE_MUX(~0x3C0000 & bfin_read_PORTE_MUX());
+ peripheral_request(P_UART1_RTS, DRIVER_NAME);
+ peripheral_request(P_UART1_CTS DRIVER_NAME);
#endif
#endif
#ifdef CONFIG_SERIAL_BFIN_UART2
- /* Enable UART2 RX and TX on pin 4 & 5 of PORT B */
- bfin_write_PORTB_FER(0x30 | bfin_read_PORTB_FER());
- bfin_write_PORTB_MUX(~0xF00 & bfin_read_PORTB_MUX());
+ peripheral_request(P_UART2_TX, DRIVER_NAME);
+ peripheral_request(P_UART2_RX, DRIVER_NAME);
#endif
#ifdef CONFIG_SERIAL_BFIN_UART3
- /* Enable UART3 RX and TX on pin 6 & 7 of PORT B */
- bfin_write_PORTB_FER(0xC0 | bfin_read_PORTB_FER());
- bfin_write_PORTB_MUX(~0xF000 | bfin_read_PORTB_MUX());
+ peripheral_request(P_UART3_TX, DRIVER_NAME);
+ peripheral_request(P_UART3_RX, DRIVER_NAME);
+
#ifdef CONFIG_BFIN_UART3_CTSRTS
- /* Enable UART3 RTS and CTS on pin 2 & 3 of PORT B */
- bfin_write_PORTB_FER(0xC | bfin_read_PORTB_FER());
- bfin_write_PORTB_MUX(~0xF0 | bfin_read_PORTB_MUX());
+ peripheral_request(P_UART3_RTS, DRIVER_NAME);
+ peripheral_request(P_UART3_CTS DRIVER_NAME);
#endif
#endif
SSYNC();
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0) {
- gpio_request(uart->cts_pin, NULL);
+ gpio_request(uart->cts_pin, DRIVER_NAME);
gpio_direction_input(uart->cts_pin);
}
if (uart->rts_pin >= 0) {
- gpio_request(uart->rts_pin, NULL);
+ gpio_request(uart->rts_pin, DRIVER_NAME);
gpio_direction_output(uart->rts_pin);
}
#endif
diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/include/asm-blackfin/mach-bf548/blackfin.h
index 791218f..19e84dd 100644
--- a/include/asm-blackfin/mach-bf548/blackfin.h
+++ b/include/asm-blackfin/mach-bf548/blackfin.h
@@ -54,7 +54,7 @@
#include "defBF549.h"
#endif
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
#ifdef CONFIG_BF542
#include "cdefBF542.h"
#endif
diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
index 98d35a9..aefab3f 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
@@ -31,6 +31,8 @@
#ifndef _CDEF_BF54X_H
#define _CDEF_BF54X_H
+#include <asm/blackfin.h>
+
#include "defBF54x_base.h"
#include <asm/system.h>
@@ -60,7 +62,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
bfin_write32(SIC_IWR2, 0);
bfin_write16(VR_CTL, val);
- __builtin_bfin_ssync();
+ SSYNC();
local_irq_save(flags);
asm("IDLE;");
@@ -242,6 +244,39 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
#define bfin_read_TWI0_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16)
#define bfin_write_TWI0_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val)
+#define bfin_read_TWI_CLKDIV() bfin_read16(TWI0_CLKDIV)
+#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI0_CLKDIV, val)
+#define bfin_read_TWI_CONTROL() bfin_read16(TWI0_CONTROL)
+#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI0_CONTROL, val)
+#define bfin_read_TWI_SLAVE_CTRL() bfin_read16(TWI0_SLAVE_CTRL)
+#define bfin_write_TWI_SLAVE_CTRL(val) bfin_write16(TWI0_SLAVE_CTRL, val)
+#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI0_SLAVE_STAT)
+#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI0_SLAVE_STAT, val)
+#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI0_SLAVE_ADDR)
+#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI0_SLAVE_ADDR, val)
+#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI0_MASTER_CTRL)
+#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI0_MASTER_CTRL, val)
+#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI0_MASTER_STAT)
+#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI0_MASTER_STAT, val)
+#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI0_MASTER_ADDR)
+#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI0_MASTER_ADDR, val)
+#define bfin_read_TWI_INT_STAT() bfin_read16(TWI0_INT_STAT)
+#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI0_INT_STAT, val)
+#define bfin_read_TWI_INT_MASK() bfin_read16(TWI0_INT_MASK)
+#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI0_INT_MASK, val)
+#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI0_FIFO_CTRL)
+#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI0_FIFO_CTRL, val)
+#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI0_FIFO_STAT)
+#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI0_FIFO_STAT, val)
+#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI0_XMT_DATA8)
+#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI0_XMT_DATA8, val)
+#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI0_XMT_DATA16)
+#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI0_XMT_DATA16, val)
+#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI0_RCV_DATA8)
+#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI0_RCV_DATA8, val)
+#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16)
+#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val)
+
/* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */
/* SPORT1 Registers */
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h
index 895ddd4..56f0a76 100644
--- a/include/asm-blackfin/mach-bf548/defBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h
@@ -1637,8 +1637,25 @@
#define RESTART 0x20 /* Work Unit Transitions */
#define DI_SEL 0x40 /* Data Interrupt Timing Select */
#define DI_EN 0x80 /* Data Interrupt Enable */
+
#define NDSIZE 0xf00 /* Flex Descriptor Size */
+#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
+#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
+#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
+#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
+#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
+#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
+#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
+#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
+#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
+
#define DMAFLOW 0xf000 /* Next Operation */
+#define DMAFLOW_STOP 0x0000 /* Stop Mode */
+#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
+#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
+#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
/* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
diff --git a/include/asm-blackfin/mach-bf548/gpio.h b/include/asm-blackfin/mach-bf548/gpio.h
index dbf66bc..cb8b0f1 100644
--- a/include/asm-blackfin/mach-bf548/gpio.h
+++ b/include/asm-blackfin/mach-bf548/gpio.h
@@ -209,8 +209,3 @@ struct gpio_port_t {
unsigned short dummy7;
unsigned int port_mux;
};
-
-int gpio_request(unsigned short gpio, const char *label);
-void peripheral_free(unsigned short per);
-int peripheral_request_list(unsigned short per[], const char *label);
-void peripheral_free_list(unsigned short per[]);
diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h
index 0b3325b..21f06f7 100644
--- a/include/asm-blackfin/mach-bf548/irq.h
+++ b/include/asm-blackfin/mach-bf548/irq.h
@@ -112,6 +112,7 @@ Events (highest priority) EMU 0
#define IRQ_ATAPI_TX BFIN_IRQ(44) /* ATAPI TX (DMA11) Interrupt */
#define IRQ_TWI0 BFIN_IRQ(45) /* TWI0 Interrupt */
#define IRQ_TWI1 BFIN_IRQ(46) /* TWI1 Interrupt */
+#define IRQ_TWI IRQ_TWI0 /* TWI Interrupt */
#define IRQ_CAN0_RX BFIN_IRQ(47) /* CAN0 Receive Interrupt */
#define IRQ_CAN0_TX BFIN_IRQ(48) /* CAN0 Transmit Interrupt */
#define IRQ_MDMAS2 BFIN_IRQ(49) /* MDMA Stream 2 Interrupt */
@@ -336,6 +337,8 @@ Events (highest priority) EMU 0
#define IRQ_PJ14 BFIN_PJ_IRQ(14) /* N/A */
#define IRQ_PJ15 BFIN_PJ_IRQ(15) /* N/A */
+#define GPIO_IRQ_BASE IRQ_PA0
+
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PJ15+1)
#else
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
index f5b32d6..4cb3337 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -1,184 +1,255 @@
-
/*
- * File: include/asm-blackfin/mach-bf561/anomaly.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * File: include/asm-blackfin/mach-bf561/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
- * - Revision L, 10Aug2006; ADSP-BF561 Silicon Anomaly List
+ * - Revision N, March 28, 2007; ADSP-BF561 Silicon Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
-/* We do not support 0.1 or 0.4 silicon - sorry */
-#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2) || defined(CONFIG_BF_REV_0_4))
-#error Kernel will not work on BF561 Version 0.1, 0.2, or 0.4
+/* We do not support 0.1, 0.2, or 0.4 silicon - sorry */
+#if __SILICON_REVISION__ < 3 || __SILICON_REVISION__ == 4
+# error Kernel will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4
#endif
-/* Issues that are common to 0.5 and 0.3 silicon */
-#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3))
-#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
- slot1 and store of a P register in slot 2 is not
- supported */
-#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not
- updated at the same time. */
-#define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned
- memory locations */
-#define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR
- registers */
-#define ANOMALY_05000127 /* Signbits instruction not functional under certain
- conditions */
-#define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */
-#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
- upper bits */
-#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */
-#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
- syncs */
-#define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz
- and higher devices */
-#define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */
-#define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */
-#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not
- functional */
-#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the
- shadow of a conditional branch */
-#define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop
- may cause bad instruction fetches */
-#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
- external SPORT TX and RX clocks */
-#define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */
-#define ANOMALY_05000269 /* High I/O activity causes output voltage of internal
- voltage regulator (VDDint) to increase */
-#define ANOMALY_05000270 /* High I/O activity causes output voltage of internal
- voltage regulator (VDDint) to decrease */
-#define ANOMALY_05000272 /* Certain data cache write through modes fail for
- VDDint <=0.9V */
-#define ANOMALY_05000274 /* Data cache write back to external synchronous memory
- may be lost */
-#define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */
-#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
- registers are interrupted */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
+#define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
+/* Trace Buffers may contain errors in emulation mode and/or exception, NMI, reset handlers */
+#define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
+/* Testset instructions restricted to 32-bit aligned memory locations */
+#define ANOMALY_05000120 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Erroneous exception when enabling cache */
+#define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
+/* Signbits instruction not functional under certain conditions */
+#define ANOMALY_05000127 (1)
+/* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */
+#define ANOMALY_05000134 (__SILICON_REVISION__ < 3)
+/* Enable wires from the Data Watchpoint Address Control Register (WPDACTL) are swapped */
+#define ANOMALY_05000135 (__SILICON_REVISION__ < 3)
+/* Stall in multi-unit DMA operations */
+#define ANOMALY_05000136 (__SILICON_REVISION__ < 3)
+/* Allowing the SPORT RX FIFO to fill will cause an overflow */
+#define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
+/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
+#define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
+/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
+#define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
+/* DMA and TESTSET conflict when both are accessing external memory */
+#define ANOMALY_05000144 (__SILICON_REVISION__ < 3)
+/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */
+#define ANOMALY_05000145 (__SILICON_REVISION__ < 3)
+/* MDMA may lose the first few words of a descriptor chain */
+#define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
+/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
+#define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
+/* IMDMA S1/D1 channel may stall */
+#define ANOMALY_05000149 (1)
+/* DMA engine may lose data due to incorrect handshaking */
+#define ANOMALY_05000150 (__SILICON_REVISION__ < 3)
+/* DMA stalls when all three controllers read data from the same source */
+#define ANOMALY_05000151 (__SILICON_REVISION__ < 3)
+/* Execution stall when executing in L2 and doing external accesses */
+#define ANOMALY_05000152 (__SILICON_REVISION__ < 3)
+/* Frame Delay in SPORT Multichannel Mode */
+#define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
+/* SPORT TFS signal stays active in multichannel mode outside of valid channels */
+#define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
+/* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */
+#define ANOMALY_05000156 (__SILICON_REVISION__ < 4)
+/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
+/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
+#define ANOMALY_05000159 (__SILICON_REVISION__ < 3)
+/* A read from external memory may return a wrong value with data cache enabled */
+#define ANOMALY_05000160 (__SILICON_REVISION__ < 3)
+/* Data Cache Fill data can be corrupted after/during Instruction DMA if certain core stalls exist */
+#define ANOMALY_05000161 (__SILICON_REVISION__ < 3)
+/* DMEM_CONTROL<12> is not set on Reset */
+#define ANOMALY_05000162 (__SILICON_REVISION__ < 3)
+/* SPORT transmit data is not gated by external frame sync in certain conditions */
+#define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
+/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+#define ANOMALY_05000166 (1)
+/* Turning Serial Ports on with External Frame Syncs */
+#define ANOMALY_05000167 (1)
+/* SDRAM auto-refresh and subsequent Power Ups */
+#define ANOMALY_05000168 (__SILICON_REVISION__ < 5)
+/* DATA CPLB page miss can result in lost write-through cache data writes */
+#define ANOMALY_05000169 (__SILICON_REVISION__ < 5)
+/* Boot-ROM code modifies SICA_IWRx wakeup registers */
+#define ANOMALY_05000171 (__SILICON_REVISION__ < 5)
+/* DSPID register values incorrect */
+#define ANOMALY_05000172 (__SILICON_REVISION__ < 3)
+/* DMA vs Core accesses to external memory */
+#define ANOMALY_05000173 (__SILICON_REVISION__ < 3)
+/* Cache Fill Buffer Data lost */
+#define ANOMALY_05000174 (__SILICON_REVISION__ < 5)
+/* Overlapping Sequencer and Memory Stalls */
+#define ANOMALY_05000175 (__SILICON_REVISION__ < 5)
+/* Multiplication of (-1) by (-1) followed by an accumulator saturation */
+#define ANOMALY_05000176 (__SILICON_REVISION__ < 5)
+/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
+#define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
+#define ANOMALY_05000180 (1)
+/* Disabling the PPI resets the PPI configuration registers */
+#define ANOMALY_05000181 (__SILICON_REVISION__ < 5)
+/* IMDMA does not operate to full speed for 600MHz and higher devices */
+#define ANOMALY_05000182 (1)
+/* Timer Pin limitations for PPI TX Modes with External Frame Syncs */
+#define ANOMALY_05000184 (__SILICON_REVISION__ < 5)
+/* PPI TX Mode with 2 External Frame Syncs */
+#define ANOMALY_05000185 (__SILICON_REVISION__ < 5)
+/* PPI packing with Data Length greater than 8 bits (not a meaningful mode) */
+#define ANOMALY_05000186 (__SILICON_REVISION__ < 5)
+/* IMDMA Corrupted Data after a Halt */
+#define ANOMALY_05000187 (1)
+/* IMDMA Restrictions on Descriptor and Buffer Placement in Memory */
+#define ANOMALY_05000188 (__SILICON_REVISION__ < 5)
+/* False Protection Exceptions */
+#define ANOMALY_05000189 (__SILICON_REVISION__ < 5)
+/* PPI not functional at core voltage < 1Volt */
+#define ANOMALY_05000190 (1)
+/* PPI does not invert the Driving PPICLK edge in Transmit Modes */
+#define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
+/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */
+#define ANOMALY_05000193 (__SILICON_REVISION__ < 5)
+/* Restarting SPORT in Specific Modes May Cause Data Corruption */
+#define ANOMALY_05000194 (__SILICON_REVISION__ < 5)
+/* Failing MMR Accesses When Stalled by Preceding Memory Read */
+#define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
+/* Current DMA Address Shows Wrong Value During Carry Fix */
+#define ANOMALY_05000199 (__SILICON_REVISION__ < 5)
+/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */
+#define ANOMALY_05000200 (__SILICON_REVISION__ < 5)
+/* Possible Infinite Stall with Specific Dual-DAG Situation */
+#define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
+/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */
+#define ANOMALY_05000204 (__SILICON_REVISION__ < 5)
+/* Specific sequence that can cause DMA error or DMA stopping */
+#define ANOMALY_05000205 (__SILICON_REVISION__ < 5)
+/* Recovery from "Brown-Out" Condition */
+#define ANOMALY_05000207 (__SILICON_REVISION__ < 5)
+/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */
+#define ANOMALY_05000208 (1)
+/* Speed Path in Computational Unit Affects Certain Instructions */
+#define ANOMALY_05000209 (__SILICON_REVISION__ < 5)
+/* UART TX Interrupt Masked Erroneously */
+#define ANOMALY_05000215 (__SILICON_REVISION__ < 5)
+/* NMI Event at Boot Time Results in Unpredictable State */
+#define ANOMALY_05000219 (__SILICON_REVISION__ < 5)
+/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */
+#define ANOMALY_05000220 (__SILICON_REVISION__ < 5)
+/* Incorrect Pulse-Width of UART Start Bit */
+#define ANOMALY_05000225 (__SILICON_REVISION__ < 5)
+/* Scratchpad Memory Bank Reads May Return Incorrect Data */
+#define ANOMALY_05000227 (__SILICON_REVISION__ < 5)
+/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */
+#define ANOMALY_05000230 (__SILICON_REVISION__ < 5)
+/* UART STB Bit Incorrectly Affects Receiver Setting */
+#define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
+/* SPORT data transmit lines are incorrectly driven in multichannel mode */
+#define ANOMALY_05000232 (__SILICON_REVISION__ < 5)
+/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
+#define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
+/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (__SILICON_REVISION__ < 5)
+/* TESTSET operation forces stall on the other core */
+#define ANOMALY_05000248 (__SILICON_REVISION__ < 5)
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ > 2 && __SILICON_REVISION__ < 5)
+/* Exception Not Generated for MMR Accesses in Reserved Region */
+#define ANOMALY_05000251 (__SILICON_REVISION__ < 5)
+/* Maximum External Clock Speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 5)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 3)
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 5)
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
+#define ANOMALY_05000258 (__SILICON_REVISION__ < 5)
+/* ICPLB_STATUS MMR Register May Be Corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ < 5)
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 5)
+/* Stores To Data Cache May Be Lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 5)
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ < 5)
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
+/* IMDMA destination IRQ status must be read prior to using IMDMA */
+#define ANOMALY_05000266 (__SILICON_REVISION__ > 3)
+/* IMDMA may corrupt data under certain conditions */
+#define ANOMALY_05000267 (1)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
+#define ANOMALY_05000269 (1)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
+#define ANOMALY_05000270 (1)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* Data cache write back to external synchronous memory may be lost */
+#define ANOMALY_05000274 (1)
+/* PPI Timing and Sampling Information Updates */
+#define ANOMALY_05000275 (__SILICON_REVISION__ > 2)
+/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
+#define ANOMALY_05000276 (__SILICON_REVISION__ < 5)
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
+#define ANOMALY_05000278 (__SILICON_REVISION__ < 5)
+/* False Hardware Error Exception When ISR Context Is Not Restored */
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 5)
+/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+#define ANOMALY_05000283 (1)
+/* A read will receive incorrect data under certain conditions */
+#define ANOMALY_05000287 (__SILICON_REVISION__ < 5)
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 5)
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
+#define ANOMALY_05000301 (1)
+/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+#define ANOMALY_05000302 (1)
+/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* PPI Is Level-Sensitive on First Transfer */
+#define ANOMALY_05000313 (1)
+/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+#define ANOMALY_05000315 (1)
+/* PF2 Output Remains Asserted After SPI Master Boot */
+#define ANOMALY_05000320 (__SILICON_REVISION__ > 3)
+/* Erroneous GPIO Flag Pin Operations Under Specific Sequences */
+#define ANOMALY_05000323 (1)
+/* SPORT Secondary Receive Channel Not Functional When Word Length Exceeds 16 Bits */
+#define ANOMALY_05000326 (__SILICON_REVISION__ > 3)
+/* New Feature: 24-Bit SPI Boot Mode Support (Not Available On Older Silicon) */
+#define ANOMALY_05000331 (__SILICON_REVISION__ < 5)
+/* New Feature: Slave SPI Boot Mode Supported (Not Available On Older Silicon) */
+#define ANOMALY_05000332 (__SILICON_REVISION__ < 5)
+/* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */
+#define ANOMALY_05000333 (__SILICON_REVISION__ < 5)
-#endif /* (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000311 (0)
-#if (defined(CONFIG_BF_REV_0_5))
-#define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT
- mode with external clock */
-#define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to
- using IMDMA */
#endif
-
-#if (defined(CONFIG_BF_REV_0_3))
-#define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input)
- Mode with 0 Frame Syncs */
-#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */
-#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through
- cache data writes */
-#define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */
-#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */
-#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */
-#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an
- accumulator saturation */
-#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General
- Purpose TX or RX modes */
-#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration
- registers */
-#define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with
- External Frame Syncs */
-#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */
-#define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits
- (not a meaningful mode) */
-#define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer
- Placement in Memory */
-#define ANOMALY_05000189 /* False Protection Exception */
-#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs
- when polarity setting is changed */
-#define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data
- corruption */
-#define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding
- memory read */
-#define ANOMALY_05000199 /* DMA current address shows wrong value during carry
- fix */
-#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during
- inactive channels in certain conditions */
-#define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG
- situation */
-#define ANOMALY_05000204 /* Incorrect data read with write-through cache and
- allocate cache lines on reads only mode */
-#define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA
- stopping */
-#define ANOMALY_05000207 /* Recovery from "brown-out" condition */
-#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain
- instructions */
-#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */
-#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable
- state */
-#define ANOMALY_05000220 /* Data Corruption with Cached External Memory and
- Non-Cached On-Chip L2 Memory */
-#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */
-#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect
- data */
-#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate
- Differences in certain Conditions */
-#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */
-#define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in
- multichannel mode */
-#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to
- hardware reset */
-#define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of
- Control causes failures */
-#define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */
-#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
- (TDM) mode in certain conditions */
-#define ANOMALY_05000251 /* Exception not generated for MMR accesses in
- reserved region */
-#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
-#define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12
- of the ICPLB Data registers differ */
-#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
-#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
-#define ANOMALY_05000262 /* Stores to data cache may be lost */
-#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB
- exception */
-#define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second
- to last instruction in hardware loop */
-#define ANOMALY_05000276 /* Timing requirements change for External Frame
- Sync PPI Modes with non-zero PPI_DELAY */
-#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
- DMA system instability */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
- not restored */
-#define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed
- in a particular stage */
-#define ANOMALY_05000287 /* A read will receive incorrect data under certain
- conditions */
-#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */
-#endif
-
-#endif /* _MACH_ANOMALY_H_ */
diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/include/asm-blackfin/mach-bf561/bf561.h
index 96a5d3a..8cc2e00 100644
--- a/include/asm-blackfin/mach-bf561/bf561.h
+++ b/include/asm-blackfin/mach-bf561/bf561.h
@@ -311,7 +311,7 @@
#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
#endif
-#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1)
+#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1)
#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK
#endif
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
index e043caf..69b9f8e 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -1,5 +1,6 @@
#include <linux/serial.h>
#include <asm/dma.h>
+#include <asm/portmux.h>
#define NR_PORTS 1
@@ -92,18 +93,24 @@ struct bfin_serial_res bfin_serial_resource[] = {
}
};
+#define DRIVER_NAME "bfin-uart"
int nr_ports = NR_PORTS;
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ peripheral_request(P_UART0_TX, DRIVER_NAME);
+ peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0) {
- gpio_request(uart->cts_pin, NULL);
+ gpio_request(uart->cts_pin, DRIVER_NAME);
gpio_direction_input(uart->cts_pin);
}
if (uart->rts_pin >= 0) {
- gpio_request(uart->rts_pin, NULL);
+ gpio_request(uart->rts_pin, DRIVER_NAME);
gpio_direction_input(uart->rts_pin);
}
#endif
diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/include/asm-blackfin/mach-bf561/blackfin.h
index 2537c84..562aee3 100644
--- a/include/asm-blackfin/mach-bf561/blackfin.h
+++ b/include/asm-blackfin/mach-bf561/blackfin.h
@@ -38,7 +38,7 @@
#include "defBF561.h"
#include "anomaly.h"
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
#include "cdefBF561.h"
#endif
diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/include/asm-blackfin/mach-bf561/cdefBF561.h
index 1a8ec9e..de97479 100644
--- a/include/asm-blackfin/mach-bf561/cdefBF561.h
+++ b/include/asm-blackfin/mach-bf561/cdefBF561.h
@@ -31,11 +31,8 @@
#ifndef _CDEF_BF561_H
#define _CDEF_BF561_H
-/*
-#if !defined(__ADSPBF561__)
-#warning cdefBF561.h should only be included for BF561 chip.
-#endif
-*/
+#include <asm/blackfin.h>
+
/* include all Core registers and bit definitions */
#include "defBF561.h"
@@ -67,7 +64,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
bfin_write32(SICA_IWR1, 0);
bfin_write16(VR_CTL, val);
- __builtin_bfin_ssync();
+ SSYNC();
local_irq_save(flags);
asm("IDLE;");
@@ -81,6 +78,12 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val)
#define bfin_read_CHIPID() bfin_read32(CHIPID)
+/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
+#define bfin_read_SWRST() bfin_read_SICA_SWRST()
+#define bfin_write_SWRST() bfin_write_SICA_SWRST()
+#define bfin_read_SYSCR() bfin_read_SICA_SYSCR()
+#define bfin_write_SYSCR() bfin_write_SICA_SYSCR()
+
/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
#define bfin_read_SICA_SWRST() bfin_read16(SICA_SWRST)
#define bfin_write_SICA_SWRST(val) bfin_write16(SICA_SWRST,val)
diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h
index 89150ec..0f2dc6e 100644
--- a/include/asm-blackfin/mach-bf561/defBF561.h
+++ b/include/asm-blackfin/mach-bf561/defBF561.h
@@ -52,6 +52,10 @@
#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */
#define CHIPID 0xFFC00014 /* Chip ID Register */
+/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
+#define SWRST SICA_SWRST
+#define SYSCR SICA_SYSCR
+
/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
#define SICA_SWRST 0xFFC00100 /* Software Reset register */
#define SICA_SYSCR 0xFFC00104 /* System Reset Configuration register */
diff --git a/include/asm-blackfin/mach-bf561/irq.h b/include/asm-blackfin/mach-bf561/irq.h
index a753ce7..1278992 100644
--- a/include/asm-blackfin/mach-bf561/irq.h
+++ b/include/asm-blackfin/mach-bf561/irq.h
@@ -289,6 +289,8 @@
#define IRQ_PF46 119
#define IRQ_PF47 120
+#define GPIO_IRQ_BASE IRQ_PF0
+
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
#define NR_IRQS (IRQ_PF47 + 1)
#else
diff --git a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h
index 94ed381..ede210e 100644
--- a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h
+++ b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h
@@ -39,7 +39,7 @@
#define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS)
#define bfin_write_SRAM_BASE_ADDRESS(val) bfin_write32(SRAM_BASE_ADDRESS,val)
#define bfin_read_DMEM_CONTROL() bfin_read32(DMEM_CONTROL)
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
extern void bfin_write_DMEM_CONTROL(unsigned int val);
#else
#define bfin_write_DMEM_CONTROL(val) bfin_write32(DMEM_CONTROL,val)
@@ -129,7 +129,7 @@ extern void bfin_write_DMEM_CONTROL(unsigned int val);
#define DTEST_DATA3 0xFFE0040C
*/
#define bfin_read_IMEM_CONTROL() bfin_read32(IMEM_CONTROL)
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
extern void bfin_write_IMEM_CONTROL(unsigned int val);
#else
#define bfin_write_IMEM_CONTROL(val) bfin_write32(IMEM_CONTROL,val)
diff --git a/include/asm-blackfin/mach-common/def_LPBlackfin.h b/include/asm-blackfin/mach-common/def_LPBlackfin.h
index be1ece8..260515d 100644
--- a/include/asm-blackfin/mach-common/def_LPBlackfin.h
+++ b/include/asm-blackfin/mach-common/def_LPBlackfin.h
@@ -33,81 +33,77 @@
#include <asm/mach/anomaly.h>
-/*#if !defined(__ADSPLPBLACKFIN__)
-#warning def_LPBlackfin.h should only be included for 532 compatible chips.
-#endif
-*/
-
#define MK_BMSK_(x) (1<<x)
-#if defined(ANOMALY_05000198)
-
-#define bfin_read8(addr) ({ unsigned char __v; \
- __asm__ __volatile__ ("NOP;\n\t" \
- "%0 = b[%1] (z);\n\t" \
- : "=d"(__v) : "a"(addr)); \
- __v; })
-
-#define bfin_read16(addr) ({ unsigned __v; \
- __asm__ __volatile__ ("NOP;\n\t"\
- "%0 = w[%1] (z);\n\t"\
- : "=d"(__v) : "a"(addr)); (unsigned short)__v; })
-
-#define bfin_read32(addr) ({ unsigned __v; \
- __asm__ __volatile__ ("NOP;\n\t"\
- "%0 = [%1];\n\t"\
- : "=d"(__v) : "a"(addr)); __v; })
+#ifndef __ASSEMBLY__
-#define bfin_write8(addr, val) ({ \
- __asm__ __volatile__ ("NOP;\n\t" \
- "b[%0] = %1;\n\t" \
- : : "a"(addr), "d"(val) : "memory");})
-
-#define bfin_write16(addr,val) ({\
- __asm__ __volatile__ ("NOP;\n\t"\
- "w[%0] = %1;\n\t"\
- : : "a"(addr) , "d"(val) : "memory");})
-
-#define bfin_write32(addr,val) ({\
- __asm__ __volatile__ ("NOP;\n\t"\
- "[%0] = %1;\n\t"\
- : : "a"(addr) , "d"(val) : "memory");})
+#include <linux/types.h>
+#if ANOMALY_05000198
+# define NOP_PAD_ANOMALY_05000198 "nop;"
#else
-
-#define bfin_read8(addr) ({ unsigned char __v; \
- __asm__ __volatile__ ( \
- "%0 = b[%1] (z);\n\t" \
- :"=d"(__v) : "a"(addr)); \
- __v; })
-
-#define bfin_read16(addr) ({ unsigned __v; \
- __asm__ __volatile__ (\
- "%0 = w[%1] (z);\n\t"\
- : "=d"(__v) : "a"(addr)); (unsigned short)__v; })
-
-#define bfin_read32(addr) ({ unsigned __v; \
- __asm__ __volatile__ (\
- "%0 = [%1];\n\t"\
- : "=d"(__v) : "a"(addr)); __v; })
-
-#define bfin_write8(addr, val) ({ \
- __asm__ __volatile__ ( \
- "b[%0] = %1; \n\t" \
- ::"a"(addr), "d"(val) : "memory");})
-
-#define bfin_write16(addr,val) ({\
- __asm__ __volatile__ (\
- "w[%0] = %1;\n\t"\
- : : "a"(addr) , "d"(val) : "memory");})
-
-#define bfin_write32(addr,val) ({\
- __asm__ __volatile__ (\
- "[%0] = %1;\n\t"\
- : : "a"(addr) , "d"(val) : "memory");})
-
+# define NOP_PAD_ANOMALY_05000198
#endif
+#define bfin_read8(addr) ({ \
+ uint8_t __v; \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "%0 = b[%1] (z);" \
+ : "=d" (__v) \
+ : "a" (addr) \
+ ); \
+ __v; })
+
+#define bfin_read16(addr) ({ \
+ uint16_t __v; \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "%0 = w[%1] (z);" \
+ : "=d" (__v) \
+ : "a" (addr) \
+ ); \
+ __v; })
+
+#define bfin_read32(addr) ({ \
+ uint32_t __v; \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "%0 = [%1];" \
+ : "=d" (__v) \
+ : "a" (addr) \
+ ); \
+ __v; })
+
+#define bfin_write8(addr, val) \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "b[%0] = %1;" \
+ : \
+ : "a" (addr), "d" (val) \
+ : "memory" \
+ )
+
+#define bfin_write16(addr, val) \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "w[%0] = %1;" \
+ : \
+ : "a" (addr), "d" (val) \
+ : "memory" \
+ )
+
+#define bfin_write32(addr, val) \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "[%0] = %1;" \
+ : \
+ : "a" (addr), "d" (val) \
+ : "memory" \
+ )
+
+#endif /* __ASSEMBLY__ */
+
/**************************************************
* System Register Bits
**************************************************/
diff --git a/include/asm-blackfin/portmux.h b/include/asm-blackfin/portmux.h
index 9d3681e..d1bcd91 100644
--- a/include/asm-blackfin/portmux.h
+++ b/include/asm-blackfin/portmux.h
@@ -14,6 +14,12 @@
#define P_MAYSHARE 0x2000
#define P_DONTCARE 0x1000
+
+int peripheral_request(unsigned short per, const char *label);
+void peripheral_free(unsigned short per);
+int peripheral_request_list(unsigned short per[], const char *label);
+void peripheral_free_list(unsigned short per[]);
+
#include <asm/gpio.h>
#include <asm/mach/portmux.h>
@@ -513,6 +519,22 @@
#define P_SPI0_SSEL3 P_UNDEF
#endif
+#ifndef P_SPI0_SSEL4
+#define P_SPI0_SSEL4 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL5
+#define P_SPI0_SSEL5 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL6
+#define P_SPI0_SSEL6 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL7
+#define P_SPI0_SSEL7 P_UNDEF
+#endif
+
#ifndef P_UART0_TX
#define P_UART0_TX P_UNDEF
#endif
diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h
index 5e5f1a0..b03cf7d 100644
--- a/include/asm-blackfin/system.h
+++ b/include/asm-blackfin/system.h
@@ -36,6 +36,7 @@
#include <linux/linkage.h>
#include <linux/compiler.h>
+#include <asm/mach/anomaly.h>
/*
* Interrupt configuring macros.
@@ -43,53 +44,60 @@
extern unsigned long irq_flags;
-#define local_irq_enable() do { \
- __asm__ __volatile__ ( \
- "sti %0;" \
- ::"d"(irq_flags)); \
-} while (0)
+#define local_irq_enable() \
+ __asm__ __volatile__( \
+ "sti %0;" \
+ : \
+ : "d" (irq_flags) \
+ )
-#define local_irq_disable() do { \
- int _tmp_dummy; \
- __asm__ __volatile__ ( \
- "cli %0;" \
- :"=d" (_tmp_dummy):); \
-} while (0)
+#define local_irq_disable() \
+ do { \
+ int __tmp_dummy; \
+ __asm__ __volatile__( \
+ "cli %0;" \
+ : "=d" (__tmp_dummy) \
+ ); \
+ } while (0)
-#if defined(ANOMALY_05000244) && defined (CONFIG_BLKFIN_CACHE)
-#define idle_with_irq_disabled() do { \
- __asm__ __volatile__ ( \
- "nop; nop;\n" \
- ".align 8;\n" \
- "sti %0; idle;\n" \
- ::"d" (irq_flags)); \
-} while (0)
+#if ANOMALY_05000244 && defined(CONFIG_BLKFIN_CACHE)
+# define NOP_PAD_ANOMALY_05000244 "nop; nop;"
#else
-#define idle_with_irq_disabled() do { \
- __asm__ __volatile__ ( \
- ".align 8;\n" \
- "sti %0; idle;\n" \
- ::"d" (irq_flags)); \
-} while (0)
+# define NOP_PAD_ANOMALY_05000244
#endif
+#define idle_with_irq_disabled() \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000244 \
+ ".align 8;" \
+ "sti %0;" \
+ "idle;" \
+ : \
+ : "d" (irq_flags) \
+ )
+
#ifdef CONFIG_DEBUG_HWERR
-#define __save_and_cli(x) do { \
- __asm__ __volatile__ ( \
- "cli %0;\n\tsti %1;" \
- :"=&d"(x): "d" (0x3F)); \
-} while (0)
+# define __save_and_cli(x) \
+ __asm__ __volatile__( \
+ "cli %0;" \
+ "sti %1;" \
+ : "=&d" (x) \
+ : "d" (0x3F) \
+ )
#else
-#define __save_and_cli(x) do { \
- __asm__ __volatile__ ( \
- "cli %0;" \
- :"=&d"(x):); \
-} while (0)
+# define __save_and_cli(x) \
+ __asm__ __volatile__( \
+ "cli %0;" \
+ : "=&d" (x) \
+ )
#endif
-#define local_save_flags(x) asm volatile ("cli %0;" \
- "sti %0;" \
- :"=d"(x):);
+#define local_save_flags(x) \
+ __asm__ __volatile__( \
+ "cli %0;" \
+ "sti %0;" \
+ : "=d" (x) \
+ )
#ifdef CONFIG_DEBUG_HWERR
#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0)
@@ -97,10 +105,11 @@ extern unsigned long irq_flags;
#define irqs_enabled_from_flags(x) ((x) != 0x1f)
#endif
-#define local_irq_restore(x) do { \
- if (irqs_enabled_from_flags(x)) \
- local_irq_enable (); \
-} while (0)
+#define local_irq_restore(x) \
+ do { \
+ if (irqs_enabled_from_flags(x)) \
+ local_irq_enable(); \
+ } while (0)
/* For spinlocks etc */
#define local_irq_save(x) __save_and_cli(x)
diff --git a/include/asm-blackfin/thread_info.h b/include/asm-blackfin/thread_info.h
index fa8f08c..34d3c2e 100644
--- a/include/asm-blackfin/thread_info.h
+++ b/include/asm-blackfin/thread_info.h
@@ -39,6 +39,11 @@
*/
#define ALIGN_PAGE_MASK 0xffffe000
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#define THREAD_SIZE 8192 /* 2 pages */
+
#ifndef __ASSEMBLY__
typedef unsigned long mm_segment_t;
@@ -76,11 +81,6 @@ struct thread_info {
#define init_thread_info (init_thread_union.thread_info)
#define init_stack (init_thread_union.stack)
-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#define THREAD_SIZE 8192 /* 2 pages */
-
/* How to get the thread information struct from C */
static inline struct thread_info *current_thread_info(void)
@@ -94,7 +94,7 @@ static inline struct thread_info *current_thread_info(void)
struct thread_info *ti;
__asm__("%0 = sp;": "=&d"(ti):
);
- return (struct thread_info *)((long)ti & ~8191UL);
+ return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1));
}
/* thread information allocation */
diff --git a/include/asm-blackfin/trace.h b/include/asm-blackfin/trace.h
index 9c2474c..6313aac 100644
--- a/include/asm-blackfin/trace.h
+++ b/include/asm-blackfin/trace.h
@@ -6,23 +6,46 @@
#ifndef _BLACKFIN_TRACE_
#define _BLACKFIN_TRACE_
+/* Normally, we use ON, but you can't turn on software expansion until
+ * interrupts subsystem is ready
+ */
+
+#define BFIN_TRACE_INIT ((CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION << 4) | 0x03)
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+#define BFIN_TRACE_ON (BFIN_TRACE_INIT | (CONFIG_DEBUG_BFIN_HWTRACE_EXPAND << 2))
+#else
+#define BFIN_TRACE_ON (BFIN_TRACE_INIT)
+#endif
+
#ifndef __ASSEMBLY__
+extern unsigned long trace_buff_offset;
+extern unsigned long software_trace_buff[];
+
/* Trace Macros for C files */
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+
#define trace_buffer_save(x) \
- do { \
- (x) = bfin_read_TBUFCTL(); \
- bfin_write_TBUFCTL((x) & ~TBUFEN); \
- } while (0)
+ do { \
+ (x) = bfin_read_TBUFCTL(); \
+ bfin_write_TBUFCTL((x) & ~TBUFEN); \
+ } while (0)
#define trace_buffer_restore(x) \
- do { \
- bfin_write_TBUFCTL((x)); \
- } while (0)
+ do { \
+ bfin_write_TBUFCTL((x)); \
+ } while (0)
+#else /* DEBUG_BFIN_HWTRACE_ON */
+
+#define trace_buffer_save(x)
+#define trace_buffer_restore(x)
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
#else
/* Trace Macros for Assembly files */
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+
#define TRACE_BUFFER_START(preg, dreg) trace_buffer_start(preg, dreg)
#define TRACE_BUFFER_STOP(preg, dreg) trace_buffer_stop(preg, dreg)
@@ -32,12 +55,26 @@
dreg = 0x1; \
[preg] = dreg;
-#define trace_buffer_start(preg, dreg) \
+#define trace_buffer_start(preg, dreg) \
preg.L = LO(TBUFCTL); \
preg.H = HI(TBUFCTL); \
- dreg = 0x13; \
+ dreg = BFIN_TRACE_ON; \
+ [preg] = dreg;
+
+#define trace_buffer_init(preg, dreg) \
+ preg.L = LO(TBUFCTL); \
+ preg.H = HI(TBUFCTL); \
+ dreg = BFIN_TRACE_INIT; \
[preg] = dreg;
+#else /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
+
+#define trace_buffer_stop(preg, dreg)
+#define trace_buffer_start(preg, dreg)
+#define trace_buffer_init(preg, dreg)
+
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
+
#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
# define DEBUG_START_HWTRACE(preg, dreg) trace_buffer_start(preg, dreg)
# define DEBUG_STOP_HWTRACE(preg, dreg) trace_buffer_stop(preg, dreg)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
