[PATCH] pata_hpt37x: Fix 2.6.22 clock PLL regression

[Alan Cox <alan@lxorguk.ukuu.org.uk>]

	Just one version of Linux ago
	The PLL code broke - oh no!
	But set the right mode
	And fix up the code
	Makes the PLL timing sync go

Closes-bug: #8791
Signed-off-by: Alan Cox <alan@redhat.com>

diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.23rc1/drivers/ata/pata_hpt37x.c linux-2.6.23rc1/drivers/ata/pata_hpt37x.c
--- linux.vanilla-2.6.23rc1/drivers/ata/pata_hpt37x.c	2007-07-23 12:56:11.000000000 +0100
+++ linux-2.6.23rc1/drivers/ata/pata_hpt37x.c	2007-07-23 14:44:39.000000000 +0100
@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt37x"
-#define DRV_VERSION	"0.6.6"
+#define DRV_VERSION	"0.6.7"
 
 struct hpt_clock {
 	u8	xfer_speed;
@@ -1103,17 +1103,17 @@
 
 		/* Select the DPLL clock. */
 		pci_write_config_byte(dev, 0x5b, 0x21);
-		pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
+		pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100);
 
 		for(adjust = 0; adjust < 8; adjust++) {
 			if (hpt37x_calibrate_dpll(dev))
 				break;
 			/* See if it'll settle at a fractionally different clock */
-			if ((adjust & 3) == 3) {
-				f_low --;
-				f_high ++;
-			}
-			pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
+			if (adjust & 1)
+				f_low -= adjust >> 1;
+			else
+				f_high += adjust >> 1;
+			pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100);
 		}
 		if (adjust == 8) {
 			printk(KERN_WARNING "hpt37x: DPLL did not stabilize.\n");
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/