Re: crash with 2.6.22.1 crash:ll_rw_blk.c blk_remove_plug()

["Satyam Sharma" <satyam.sharma@gmail.com>]

Hi Walter,

Thanks for reporting this.

On 7/22/07, walter harms <wharms@bfs.de> wrote:
> hello all,
> on my asus notebook tm620 there is a crash with 2.6.22 and 2.6.21

Did this happen when you were resuming from a suspend-to-ram/disk?
[ I ask because I see swsusp in the trace below, linux-pm added to Cc: ]

> ....
> Using IPI Shortcut mode
> WARNING: at block/ll_rw_blk.c:1575 blk_remove_plug()
>  [<c01ac87e>] blk_remove_plug+0x36/0x5a
>  [<c01ac8b6>] __generic_unplug_device+0x14/0x1f
>  [<c01ad587>] __make_request+0x39b/0x49c
>  [<c01abc8c>] generic_make_request+0x228/0x255
>  [<c01adb54>] submit_bio+0xa5/0xac
>  [<c013e233>] mempool_alloc+0x37/0xae
>  [<c01314dc>] submit+0xc2/0x11d
>  [<c0131585>] bio_read_page+0x24/0x27
>  [<c013188b>] swsusp_check+0x4f/0xaf
>  [<c012f6c2>] software_resume+0x5f/0x108
>  [<c037867e>] kernel_init+0xb0/0x212
>  [<c0103a16>] ret_from_fork+0x6/0x1c
>  [<c03785ce>] kernel_init+0x0/0x212
>  [<c03785ce>] kernel_init+0x0/0x212
>  [<c010465b>] kernel_thread_helper+0x7/0x10
>  =======================

Surprising, that's a WARN_ON(!irqs_disabled()) but IRQs are disabled
alright on that codepath. OTOH, __make_request() is heavily goto-driven,
uses the non-save/restore variants of spin_lock_irq, and does not even
balance locks / unlocks for some error paths ... gaah.

> Freeing unused kernel memory: 272k freed
> ....
>
> I attached two files with the kernel bootmessage
>
> 1. bug.txt.gz
>  kernel 2.6.22.1 created with netconsole, last lines were missing i added them by hand
>
> 2. out.txt.gz
>   simple a dmesg from kernel 2.6.18, works fine

I've reattached them in this mail, for linux-pm to see.

> additional observations:
> removing 'resume=/dev/hda1' from grub lets the crash disappear but the
> drive still does not work because
> ata_id[772]: main: HDIO_GET_IDENTITY failed for '/dev/.tmp-3-0'

If you're resuming from a suspend I don't see how you can avoid
giving the resume= parameter (unless you somehow specify some
default at build-time ...)

> there is a bug in the hd detection code:
> 2.6.22.1
> hda: 8032MB, CHS=1024/255/63
>  hda: hda1 hda2 hda3
>  hda: p2 exceeds device capacity
>  hda: p3 exceeds device capacity
>
> 2.6.18
> hda: 39070080 sectors (20003 MB), CHS=38760/16/63, UDMA(100)
> hda: cache flushes supported
>  hda: hda1 hda2 hda3
> Probing IDE interface ide1...
>
>
> here the output from fdisk:
>
>  fdisk -l
>
> Disk /dev/hda: 20.0 GB, 20003880960 bytes
> 255 heads, 63 sectors/track, 2432 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
>
>    Device Boot      Start         End      Blocks   Id  System
> /dev/hda1               1         131     1052226   82  Linux swap / Solaris
> /dev/hda2   *         132        1437    10490445   83  Linux
> /dev/hda3            1438        2432     7992337+  83  Linux
>
>
>
> is it possible that this leads to a chain of events causing the crash in ll_rw_blk.c ?
>
> if someone is interested in the .config please mail me directly, i have not
> subscribed the lkml.

Yes, please post your .config also.

Thanks,
Satyam

Attachment: bug.txt.gz
Description: GNU Zip compressed data

Attachment: out.txt.gz
Description: GNU Zip compressed data