Re: Regression with sys_time() speedup patch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



At Fri, 20 Jul 2007 17:12:13 +0200,
Ingo Molnar wrote:
> 
> 
> * Takashi Iwai <[email protected]> wrote:
> 
> > Hi Ingo,
> > 
> > 2.6.22-git as of today caused some regression on my P4 machine.  For 
> > example, automount process takes 10-30% CPU time constantly, and 
> > sometimes vim couldn't write files properly.
> 
> does the patch below fix it?

Yep, through a short run, it seems working fine.

But, is it safe to introduce another variable different from
xtime.tv_sec?  Since xtime.tv_sec is referred in many other places,
I'm afaid this may bring confusion...


thanks,

Takashi

> 
> 	Ingo
> 
> --------------->
> Subject: time: introduce xtime_seconds
> From: Ingo Molnar <[email protected]>
> 
> introduce the xtime_seconds optimization. This is a read-mostly 
> low-resolution time source available to sys_time() and kernel-internal 
> use. This variable is kept uptodate atomically, and it's monotically 
> increased, every time some time interface constructs an xtime-alike time 
> result that overflows the seconds value. (it's updated from the timer 
> interrupt as well)
> 
> this way high-resolution time results update their seconds component at 
> the same time sys_time() does it:
> 
>  1184858832999989000
>  1184858832000000000
>  1184858832999992000
>  1184858832000000000
>  1184858832999996000
>  1184858832000000000
>  1184858832999999000
>  1184858832000000000
>  1184858833000003000
>  1184858833000000000
>  1184858833000006000
>  1184858833000000000
>  1184858833000009000
>  1184858833000000000
> 
>  [ these are nsec time results from alternating calls to sys_time() and 
>    sys_gettimeofday(), recorded at the seconds boundary. ]
> 
> instead of the previous (non-coherent) behavior:
> 
>  1184848950999987000
>  1184848950000000000
>  1184848950999990000
>  1184848950000000000
>  1184848950999994000
>  1184848950000000000
>  1184848950999997000
>  1184848950000000000
>  1184848951000001000
>  1184848950000000000
>  1184848951000005000
>  1184848950000000000
>  1184848951000008000
>  1184848950000000000
>  1184848951000011000
>  1184848950000000000
>  1184848951000015000
> 
> Signed-off-by: Ingo Molnar <[email protected]>
> ---
>  include/linux/time.h      |   13 +++++++++++--
>  kernel/time.c             |   25 ++++++-------------------
>  kernel/time/timekeeping.c |   28 ++++++++++++++++++++++++----
>  3 files changed, 41 insertions(+), 25 deletions(-)
> 
> Index: linux/include/linux/time.h
> ===================================================================
> --- linux.orig/include/linux/time.h
> +++ linux/include/linux/time.h
> @@ -91,19 +91,28 @@ static inline struct timespec timespec_s
>  extern struct timespec xtime;
>  extern struct timespec wall_to_monotonic;
>  extern seqlock_t xtime_lock __attribute__((weak));
> +extern unsigned long xtime_seconds;
>  
>  extern unsigned long read_persistent_clock(void);
>  void timekeeping_init(void);
>  
> +extern void __update_xtime_seconds(unsigned long new_xtime_seconds);
> +
> +static inline void update_xtime_seconds(unsigned long new_xtime_seconds)
> +{
> +	if (unlikely((long)(new_xtime_seconds - xtime_seconds) > 0))
> +		__update_xtime_seconds(new_xtime_seconds);
> +}
> +
>  static inline unsigned long get_seconds(void)
>  {
> -	return xtime.tv_sec;
> +	return xtime_seconds;
>  }
>  
>  struct timespec current_kernel_time(void);
>  
>  #define CURRENT_TIME		(current_kernel_time())
> -#define CURRENT_TIME_SEC	((struct timespec) { xtime.tv_sec, 0 })
> +#define CURRENT_TIME_SEC	((struct timespec) { xtime_seconds, 0 })
>  
>  extern void do_gettimeofday(struct timeval *tv);
>  extern int do_settimeofday(struct timespec *tv);
> Index: linux/kernel/time.c
> ===================================================================
> --- linux.orig/kernel/time.c
> +++ linux/kernel/time.c
> @@ -58,11 +58,10 @@ EXPORT_SYMBOL(sys_tz);
>  asmlinkage long sys_time(time_t __user * tloc)
>  {
>  	/*
> -	 * We read xtime.tv_sec atomically - it's updated
> -	 * atomically by update_wall_time(), so no need to
> -	 * even read-lock the xtime seqlock:
> +	 * We read xtime_seconds atomically - it's updated
> +	 * atomically by update_xtime_seconds():
>  	 */
> -	time_t i = xtime.tv_sec;
> +	time_t i = xtime_seconds;
>  
>  	smp_rmb(); /* sys_time() results are coherent */
>  
> @@ -226,11 +225,11 @@ inline struct timespec current_kernel_ti
>  
>  	do {
>  		seq = read_seqbegin(&xtime_lock);
> -		
> +
>  		now = xtime;
>  	} while (read_seqretry(&xtime_lock, seq));
>  
> -	return now; 
> +	return now;
>  }
>  
>  EXPORT_SYMBOL(current_kernel_time);
> @@ -377,19 +376,7 @@ void do_gettimeofday (struct timeval *tv
>  	tv->tv_sec = sec;
>  	tv->tv_usec = usec;
>  
> -	/*
> -	 * Make sure xtime.tv_sec [returned by sys_time()] always
> -	 * follows the gettimeofday() result precisely. This
> -	 * condition is extremely unlikely, it can hit at most
> -	 * once per second:
> -	 */
> -	if (unlikely(xtime.tv_sec != tv->tv_sec)) {
> -		unsigned long flags;
> -
> -		write_seqlock_irqsave(&xtime_lock, flags);
> -		update_wall_time();
> -		write_sequnlock_irqrestore(&xtime_lock, flags);
> -	}
> +	update_xtime_seconds(sec);
>  }
>  EXPORT_SYMBOL(do_gettimeofday);
>  
> Index: linux/kernel/time/timekeeping.c
> ===================================================================
> --- linux.orig/kernel/time/timekeeping.c
> +++ linux/kernel/time/timekeeping.c
> @@ -45,14 +45,28 @@ EXPORT_SYMBOL(xtime_lock);
>   * used instead.
>   */
>  struct timespec xtime __attribute__ ((aligned (16)));
> -struct timespec wall_to_monotonic __attribute__ ((aligned (16)));
> -static unsigned long total_sleep_time;		/* seconds */
> -
>  EXPORT_SYMBOL(xtime);
>  
> +struct timespec wall_to_monotonic __attribute__ ((aligned (16))) __read_mostly;
> +static unsigned long total_sleep_time __read_mostly;	/* seconds */
> +
> +unsigned long xtime_seconds __read_mostly;
> +EXPORT_SYMBOL(xtime_seconds);
> +
> +/* pointer to current clocksource: */
> +static struct clocksource *clock __read_mostly;
>  
> -static struct clocksource *clock; /* pointer to current clocksource */
> +/*
> + * Called when either xtime or any xtime-alike result back to
> + * user-space overflows the xtime_seconds field:
> + */
> +void __update_xtime_seconds(unsigned long new_xtime_seconds)
> +{
> +	unsigned long old_xtime_seconds = xtime_seconds;
>  
> +	if ((long)(new_xtime_seconds - old_xtime_seconds) > 0)
> +		cmpxchg(&xtime_seconds, old_xtime_seconds, new_xtime_seconds);
> +}
>  
>  #ifdef CONFIG_GENERIC_TIME
>  /**
> @@ -100,6 +113,8 @@ static inline void __get_realtime_clock_
>  	} while (read_seqretry(&xtime_lock, seq));
>  
>  	timespec_add_ns(ts, nsecs);
> +
> +	update_xtime_seconds(ts->tv_sec);
>  }
>  
>  /**
> @@ -256,6 +271,8 @@ void __init timekeeping_init(void)
>  	clock->cycle_last = clocksource_read(clock);
>  
>  	xtime.tv_sec = sec;
> +	update_xtime_seconds(sec);
> +
>  	xtime.tv_nsec = 0;
>  	set_normalized_timespec(&wall_to_monotonic,
>  		-xtime.tv_sec, -xtime.tv_nsec);
> @@ -290,6 +307,8 @@ static int timekeeping_resume(struct sys
>  		unsigned long sleep_length = now - timekeeping_suspend_time;
>  
>  		xtime.tv_sec += sleep_length;
> +		update_xtime_seconds(xtime.tv_sec);
> +
>  		wall_to_monotonic.tv_sec -= sleep_length;
>  		total_sleep_time += sleep_length;
>  	}
> @@ -464,6 +483,7 @@ void update_wall_time(void)
>  			clock->xtime_nsec -= (u64)NSEC_PER_SEC << clock->shift;
>  			xtime.tv_sec++;
>  			second_overflow();
> +			update_xtime_seconds(xtime.tv_sec);
>  		}
>  
>  		/* interpolator bits */
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux