Re: libata [ata_piix] still no resume from S3 ?

[Rúben Fonseca <krani1@0x82.com>]

On Fri, 13 Jul 2007, Tejun Heo wrote:

> Rúben Fonseca wrote:
> > Hi to all!
> > 
> > I'm on Debian Sid with kernel 2.6.21 and I still can't resume my laptop
> > (Sony Vaio SZ2) from S3. Searched on the archive and it seems that SATA 
> > drives are getting problems when used via the "new" libata. When the
> > laptop tries to resume, it can't access the hard drive anymore (the LED
> > never blinks), the filesystem is mounted read-only and of course, the
> > system hangs. I still can see a "Lost interrupt" apearing on my LCD when
> > it is resuming. Sometimes it is IRQ 22, other times it is IRQ 23.
> > 
> > Is this still a know problem? Does 2.6.22 solve this already? If you
> > need more information about my environment, please ask :)
> 
> Actually, 'lost interrupt' is from the "old" IDE driver.  Care to give a
> shot at the new one?

Sorry, it was my mistake. Here's more info about the problem.
I had to copy "by hand" the trace, so I remove the hexadecimal parts
(if you need them, please ask i Will try to copy them too). For now
I just want to know if you can diagnose this problem, or need more info.
So here's the interesting (I think) part of the log after resume:

irq 23: nobody cared (try booting with the "irqpool" option)
 __report_bad_irq
 note_interrupt
 handle_IRQ_event
 handle_fasteoi_irq
 do_IRQ
 do_IRQ
 irq_exit
 smp_acpi_timer
 common_interrupt
 acpi_pm_read
 getnstimeofday
 ktime_get_ts
 ktime_egt
 tick_nohz_restart_sched_tick
 cpu_idle
 start_kernel
 unkown_bootoption
 =====
handlers:
 (ata_interrupt [libata])
 (tifm_7xx1_isr [tifm_7xx1])
Disabling IRQ #23
(...)
ATA: abnormal status 0x7F on port 0x000118cf

And hard drive never cames up.. have to hard reboot the machine..
Does it help?

Ruben

-- 
Will work for bandwidth
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/