Re: [PATCH 8/12] drivers/isdn/hisax/nj_s.c: replace pci_find_device with pci_get_device

["S.Çağlar Onur" <caglar@pardus.org.tr>]

[resend] i forget to quilt refresh :(, sorry for noise

14 Tem 2007 Cts tarihinde, S.Çağlar Onur şunları yazmıştı: 
> ---
>  drivers/isdn/hisax/nj_s.c |   21 +++++++++++++--------
>  1 file changed, 13 insertions(+), 8 deletions(-)

Following patch replaces pci_find_device with pci_get_device to avoid 
following compiliation warning;

drivers/isdn/hisax/nj_s.c: In function `setup_netjet_s':
drivers/isdn/hisax/nj_s.c:173: warning: `pci_find_device' is deprecated 
(declared at include/linux/pci.h:478)

and also removes trailing whitespaces at the ends of lines and converts 
smarttabs/whitespaces into real tabs

Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>

---
 drivers/isdn/hisax/nj_s.c |   21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

Index: linux-2.6/drivers/isdn/hisax/nj_s.c
===================================================================
--- linux-2.6.orig/drivers/isdn/hisax/nj_s.c
+++ linux-2.6/drivers/isdn/hisax/nj_s.c
@@ -170,20 +170,20 @@ setup_netjet_s(struct IsdnCard *card)
 
 	for ( ;; )
 	{
-		if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
+		if ((dev_netjet = pci_get_device(PCI_VENDOR_ID_TIGERJET,
 			PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
 			if (pci_enable_device(dev_netjet))
-				return(0);
+				goto dev_netjet_cleanup;
 			pci_set_master(dev_netjet);
 			cs->irq = dev_netjet->irq;
 			if (!cs->irq) {
 				printk(KERN_WARNING "NETjet-S: No IRQ for PCI card found\n");
-				return(0);
+				goto dev_netjet_cleanup;
 			}
 			cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
 			if (!cs->hw.njet.base) {
 				printk(KERN_WARNING "NETjet-S: No IO-Adr for PCI card found\n");
-				return(0);
+				goto dev_netjet_cleanup;
 			}
 			/* the TJ300 and TJ320 must be detected, the IRQ handling is different
 			 * unfortunatly the chips use the same device ID, but the TJ320 has
@@ -199,7 +199,7 @@ setup_netjet_s(struct IsdnCard *card)
 				(dev_netjet->subsystem_device == 0x02)) {
 				printk(KERN_WARNING "Netjet: You tried to load this driver with an 
incompatible TigerJet-card\n");
 				printk(KERN_WARNING "Use type=41 for Formula-n enter:now ISDN PCI and 
compatible\n");
-				return(0);
+				goto dev_netjet_cleanup;
 			}
 			/* end new code */
 		} else {
@@ -237,8 +237,8 @@ setup_netjet_s(struct IsdnCard *card)
 			default :
 				printk( KERN_WARNING "NETjet-S: No PCI card found\n" );
 				return 0;
-                }
-                break;
+		}
+		break;
 	}
 #else
 
@@ -259,7 +259,7 @@ setup_netjet_s(struct IsdnCard *card)
 		       CardType[card->typ],
 		       cs->hw.njet.base,
 		       cs->hw.njet.base + bytecnt);
-		return (0);
+		goto dev_netjet_cleanup;
 	}
 	cs->readisac  = &NETjet_ReadIC;
 	cs->writeisac = &NETjet_WriteIC;
@@ -273,5 +273,10 @@ setup_netjet_s(struct IsdnCard *card)
 	cs->irq_func = &netjet_s_interrupt;
 	cs->irq_flags |= IRQF_SHARED;
 	ISACVersion(cs, "NETjet-S:");
+	pci_dev_put(dev_netjet);
 	return (1);
+
+dev_netjet_cleanup:
+	pci_dev_put(dev_netjet);
+	return (0);
 }

-- 
S.Çağlar Onur <caglar@pardus.org.tr>
http://cekirdek.pardus.org.tr/~caglar/

Linux is like living in a teepee. No Windows, no Gates and an Apache in house!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/