Mark Lord wrote:
O> >> BTW, why the timeout is so damn long? 2*WAIT_CMD is 20
secs, and if DMA is not complete or interrupt pending, it may wait
10 more secs...
..
I've lost the original question from this thread, but the idea of the
The original question concerned specifically the DMA command
timeout which is twice more than the usual one, WAIT_CMD (10 seconds).
longish
timeouts was that drive *may* be spun down ("standby"), and thus have
to spin
up again to complete media commands. Back then, drives were much
slower at
spinning up than nowadays, and the ATA spec says to allow up to 30
seconds.
Well, that doesn't explain the DMA case.
When a drive is in standby, we don't send it anything special to wake up.
Wait, aren't we sending IDLE on resume step 2 -- looking at
ide-io.cide_start_power_step()?
Cheers
MBR, Sergei
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
