[M68KNOMMU]: remove old cache management cruft

[Greg Ungerer <gerg@snapgear.com>]

Remove cache management cruft. This code is dead, all the cache
manangement functions for the ColdFire exist in the header file
include/asm-m68knommu/cacheflush.h.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---


diff -Naur linux-2.6.22/arch/m68knommu/mm/memory.c linux-2.6.22-uc0/arch/m68knommu/mm/memory.c
--- linux-2.6.22/arch/m68knommu/mm/memory.c	2007-07-12 15:23:02.000000000 +1000
+++ linux-2.6.22-uc0/arch/m68knommu/mm/memory.c	2007-07-12 15:27:04.000000000 +1000
@@ -17,90 +17,14 @@
 #include <linux/types.h>
 #include <linux/slab.h>
 
-#include <asm/setup.h>
 #include <asm/segment.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
-#include <asm/traps.h>
-#include <asm/io.h>
 
 /*
- * cache_clear() semantics: Clear any cache entries for the area in question,
- * without writing back dirty entries first. This is useful if the data will
- * be overwritten anyway, e.g. by DMA to memory. The range is defined by a
- * _physical_ address.
- */
-
-void cache_clear (unsigned long paddr, int len)
-{
-}
-
-
-/*
- *	Define cache invalidate functions. The ColdFire 5407 is really
- *	the only processor that needs to do some work here. Anything
- *	that has separate data and instruction caches will be a problem.
- */
-#ifdef CONFIG_M5407
-
-static __inline__ void cache_invalidate_lines(unsigned long paddr, int len)
-{
-	unsigned long	sset, eset;
-
-	sset = (paddr & 0x00000ff0);
-	eset = ((paddr + len) & 0x0000ff0) + 0x10;
-
-	__asm__ __volatile__ (
-		"nop\n\t"
-		"clrl	%%d0\n\t"
-		"1:\n\t"
-		"movel	%0,%%a0\n\t"
-		"addl	%%d0,%%a0\n\t"
-		"2:\n\t"
-		".word	0xf4e8\n\t"
-		"addl	#0x10,%%a0\n\t"
-		"cmpl	%1,%%a0\n\t"
-		"blt	2b\n\t"
-		"addql	#1,%%d0\n\t"
-		"cmpil	#4,%%d0\n\t"
-		"bne	1b"
-		: : "a" (sset), "a" (eset) : "d0", "a0" );
-}
-
-#else
-#define	cache_invalidate_lines(a,b)
-#endif
-
-
-/*
- * cache_push() semantics: Write back any dirty cache data in the given area,
- * and invalidate the range in the instruction cache. It needs not (but may)
- * invalidate those entries also in the data cache. The range is defined by a
- * _physical_ address.
- */
-
-void cache_push (unsigned long paddr, int len)
-{
-	cache_invalidate_lines(paddr, len);
-}
-
-
-/*
- * cache_push_v() semantics: Write back any dirty cache data in the given
- * area, and invalidate those entries at least in the instruction cache. This
- * is intended to be used after data has been written that can be executed as
- * code later. The range is defined by a _user_mode_ _virtual_ address  (or,
- * more exactly, the space is defined by the %sfc/%dfc register.)
- */
-
-void cache_push_v (unsigned long vaddr, int len)
-{
-	cache_invalidate_lines(vaddr, len);
-}
-
-/* Map some physical address range into the kernel address space. The
- * code is copied and adapted from map_chunk().
+ * Map some physical address range into the kernel address space.
+ * The code is copied and adapted from map_chunk().
  */
 
 unsigned long kernel_map(unsigned long paddr, unsigned long size,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/