Hi,
I am trying to use a mips cpu the cs5536. I have some problem with
the 8259 of cs5536. The databook said,
"Control Logic
The INT output goes directly to the CPU interrupt input.
When an INT signal is activated, the CPU responds with an
Interrupt Acknowledge access that is translated to two
pulses on the INTA input of the PIC. At the first INTA pulse,
the highest priority IRR bit is loaded into the corresponding
ISR bit, and that IRR bit is reset. The second INTA pulse
instructs the PIC to present the 8-bit vector of the interrupt
handler onto the data bus."
Is it the responsibility of north bridge to reponse to intr with a PCI
Interrupt Ack cycle?
it's a problem that my northbridge didn't implement that! Fortunately we
use a fpga as a northbridge.
it seem it's no way to fix this by software, for OCW3 didn't implemnt
Poll command:(
so I guess the the process is:
1) 8259 receive a int, a bit irr got set.
2) 8259 assert intr.
3) northbrige generate a int ack cycle.
4) cs5536 translate the ack into two INTA pulse, and the reponse
northbridge with a interrupt vector.
5) then my program can get the vector from northbridge?
Is that right?
Without int ack, generic linux-mips 8259 code can't work.
Greetings,
Tian
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
