[patch 00/12] Slab defragmentation V4

[Christoph Lameter <clameter@sgi.com>]

V3->V4:
- Optimize scan for slabs that need defragmentation
- Add /sys/slab/*/defrag_ratio to allow setting defrag limits
  per slab.
- Add support for buffer heads.
- Describe how the cleanup after the daily updatedb can be
  improved by slab defragmentation.
- Rediff against 2.6.22-rc6-mm1 (+ slub patches in mm but
  there should be minimal overlap--if any--with those)

V2->V3
- Support directory reclaim
- Add infrastructure to trigger defragmentation after slab shrinking if we
  have slabs with a high degree of fragmentation.

V1->V2
- Clean up control flow using a state variable. Simplify API. Back to 2
  functions that now take arrays of objects.
- Inode defrag support for a set of filesystems
- Fix up dentry defrag support to work on negative dentries by adding
  a new dentry flag that indicates that a dentry is not in the process
  of being freed or allocated.



Slab defragmentation is useful to increase the object density in slab caches.
On reclaim the fragmentation ratios will be checked and if a the object
density (ratio between maximum objects that could be stored in the allocated
slabs and the actuall objects in use) in a defragmentable slab is less than
a certain percentage (defaults to 30%) then the slabs with the lowest number
of objects in them will be freed which increases the object density.

Currently supported are

1. dentry defrag
2. inode defrag (with a generic interface to allow easy setup of more
   filesystems than the currently supported ext2/3/4 reiserfs, XFS
   and proc)
3. buffer_heads

One typical mechanism that triggers slab defragmentation on my systems
is the daily run of

	updatedb

Updatedb scans all files on the system which causes a high inode and dentry
use. After updatedb is complete we need to go back to the regular use
patterns (typical on my machine: kernel compiles). Those need the memory now
for different purposes. The inodes and dentries used for updatedb will
gradually be aged by the dentry/inode reclaim algorithm which will free
up the dentries and inode entries randomly through the slabs that were
allocated. As a result the slabs will become sparsely populated. If they
become empty then they can be freed but a lot of them will remain sparsely
populated. That is where slab defrag comes in: It removes the slabs with
just a few entries reclaiming more memory for other uses.

Currently slab reclaim writes messages like this to the syslog if slab defrag
is occurring:





Test results (see appended scripts / user space code for more data)

(3 level tree with 10 entries at first level , 20 at the second and 30 files at the
third level. Files at the lowest level were removed to create inode fragmentation)

%Ra is the allocation ratio (need to apply the slabinfo patch to get those numbers)

inode reclaim in reiserfs

Name                   Objects Objsize    Space Slabs/Part/Cpu  O/S O %Ra %Ef Flg
dentry                   14660     200     3.0M        733/0/1   20 0 100  97 Da
reiser_inode_cache        1596     640     4.1M      256/201/1   25 2  24  24 DCa

Status after defrag

Name                   Objects Objsize    Space Slabs/Part/Cpu  O/S O %Ra %Ef Flg
dentry                    8849     200     1.8M       454/17/1   20 0  97  95 Da
reiser_inode_cache        1381     640     1.0M        65/11/0   25 2  84  82 DCa



Slab defragmentation can be triggered in two ways:

1. Manually by running

slabinfo -s <slabs-to-shrink>

or manually by the kernel calling

kmem_cache_shrink(slab)

(Currently only ACPI is doing such a call to a slab that has no
defragmentation support. In that case we simply do what SLAB does:
drop per cpu caches and sift through partial list for free slabs).

2. Automatically if defragmentable slabs reach a certain degree of
   fragmentation.

The point where slab defragmentation occurs is can be set at

/proc/sys/vm/slab_defrag_ratio

Slab fragmentation is measured by how much of the possible objects in a
slab are in use. The default setting for slab_defrag_ratio is 30%. This
means that slab fragmentation is going to be triggered if there are more than
3 free object slots for each allocated object.

Setting the slab_defrag_ratio higher will cause more defragmentation runs.
If slab_defrag_ratio is set to 0 then no slab defragmentation occurs.

Slabs are checked for their fragmentation levels after the slabs have been shrunk
by running shrinkers in vm/scan.c during memory reclaim. This means that slab
defragmentation is only triggered if we are under memory pressure and if there is
significant slab fragmentation.



Test script:

#!/bin/sh

echo 30 >/proc/sys/vm/slab_defrag_ratio

./gazfiles c 3 10 20 30
echo "Status before"
slabinfo -D
./gazfiles d 2
echo "Status after removing files"
slabinfo -D
slabinfo -s
echo "Status after defrag"
slabinfo -D
./gazfiles d 0


gazfiles.c :

/*
 * Create a gazillion of files to be able to create slab fragmentation
 *
 * (C) 2007 sgi, Christoph Lameter <clameter@sgi.com>
 *
 * Create a n layered hierachy of files of empty files
 *
 * gazfiles <action> <levels> <n1> <n2> ...
 *
 * gazfiles c[reate] 3 50 50 50
 *
 * gazfiles s[hrink] <levels>
 *
 * gazfiles r[andomkill] <nr to kill> 
 */

#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <dirent.h>
#include <string.h>
#include <unistd.h>
#include <stdarg.h>
#include <getopt.h>
#include <regex.h>
#include <errno.h>

#define MAXIMUM_LEVELS 10

int level;
int sizes[MAXIMUM_LEVELS];

void fatal(const char *x, ...)
{
        va_list ap;

        va_start(ap, x);
        vfprintf(stderr, x, ap);
        va_end(ap);
        exit(1);
}

int read_gaz(void)
{
	FILE *f = fopen(".gazinfo", "r");
	int rc = 0;
	int i;

	if (!f)
		return 0;

	if (!fscanf(f, "%d", &level))
		goto out;

	if (level >= MAXIMUM_LEVELS)
		goto out;

	for (i = 0; i < level; i++)
		if (!fscanf(f, " %d", &sizes[i]))
			goto out;
	rc = 1;
out:
	fclose(f);
	return rc;
}

void write_gaz(void)
{
	FILE *f = fopen(".gazinfo","w");
	int i;

	fprintf(f, "%d",level);
	for (i = 0; i < level; i++)
		fprintf(f," %d", sizes[i]);
	fprintf(f, "\n");
	fclose(f);
}

void cre(int l)
{
	int i;

	for (i = 0; i < sizes[l - 1]; i++) {
		char name[20];

		sprintf(name, "%03d", i);

		if (l < level) {
			mkdir(name, 0775);
			chdir(name);
			cre(l + 1);
			chdir("..");
		} else {
			FILE *f;

			f = fopen(name,"w");
			fprintf(f, "Test");
			fclose(f);
		}
	}
}

void create(int l, char **sz)
{
	int i;

	level = l;
	for (i = 0; i < level; i++)
		sizes[i] = atoi(sz[i]);

	if (mkdir("gazf", 0775))
		fatal("Cannot create gazf here\n");
	chdir("gazf");
	write_gaz();
	cre(1);
	chdir("..");
}

void shrink(int level)
{
	if (chdir("gazf"))
		fatal("No gazfiles in this directory");
	read_gaz();
	chdir("..");
}

void scand(int l, void (*func)(int, int, char *, unsigned long),
			unsigned long level)
{
	DIR *dir;
	struct dirent *de;

	dir = opendir(".");
	if (!dir)
		fatal("Cannot open directory");
	while ((de = readdir(dir))) {
		struct stat s;

		if (de->d_name[0] == '.')
			continue;

		/*
		 * Some idiot broke the glibc library or made it impossible
		 * to figure out how to make readdir work right
		 */

		stat(de->d_name, &s);
		if (S_ISDIR(s.st_mode))
			de->d_type = DT_DIR;

		if (de->d_type == DT_DIR) {
			if (chdir(de->d_name))
				fatal("Cannot enter %s", de->d_name);
			scand(l + 1, func, level);
			chdir("..");
			func(l, 1, de->d_name, level);
		} else {
			func(l, 0, de->d_name, level);
		}
	}
	closedir(dir);
}

void traverse(void (*func)(int, int, char *, unsigned long),
		unsigned long level)
{
	if (chdir("gazf"))
		fatal("No gazfiles in this directory");
	scand(1, func, level);
	chdir("..");
}

void randomkill(int nr)
{
	if (chdir("gazf"))
		fatal("No gazfiles in this directory");
	read_gaz();
	chdir("..");
}

void del_func(int l, int dir, char *name, unsigned long level)
{
	if (l <= level)
		return;
	if (dir) {
		if (rmdir(name))
			fatal("Cannot remove directory %s");
	} else {
		if (unlink(name))
			fatal("Cannot unlink file %s");
	}
}

void delete(int l)
{
	if (l == 0) {
		system("rm -rf gazf");
		return;
	}
	traverse(del_func, l);
}

void usage(void)
{
	printf("gazfiles: Tool to manage gazillions of files\n\n");
	printf("gazfiles create <levels> <#l1> <#l2> ...\n");
	printf("gazfiles delete <levels>\n");
	printf("gazfiles shrink <levels>\n");
	printf("gazfiles randomkill <nr>\n\n");
	printf("(C) 2007 sgi, Christoph Lameter <clameter@sgi.com>\n");
	exit(0);
}

int main(int argc, char *argv[])
{
	if (argc  <  2)
		usage();

	switch (argv[1][0]) {
		case 'c' :
			create(atoi(argv[2]), argv + 3);
			break;
		case 's' :
			if (argc != 3)
				usage();

			shrink(atoi(argv[2]));
			break;
		case 'r' :
			if (argc != 3)
				usage();

			randomkill(atoi(argv[2]));
			break;
		case 'd':
			if (argc != 3)
				usage();
			delete(atoi(argv[2]));
			break;

		default:
			usage();
	}
	return 0;
}

-- 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/