Gene Heskett skrev:
Greetings;
The drive speeds seem to be going the wrong way. Its an nforce2 equipt mobo,
and I have 3 drives currently in this box. Running 2.6.22-rc6-cfs-v18 + the
ftdi_sio.c patch.
hda, the primary on cable 0, is running at around 28MB/Sec. Its a 200GB WD
about 2 years old.
Looks like this one is stuck at UDMA/33
Check the dmesg what the kernel detects, and why it ends up at low speed...
hdb, is running at around 79MB/Sec, its a 4 year old 120GB WD.
hdd is running at about 75MB/Sec, is a nearly new 300GB WD.
Can I read anything into the fact that the 2 fast drives are on the slave end
of the cables, whereas the slow one is master in the middle of the cable?
--
Thomas
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]