Re: Some NCQ numbers...

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 28, 2007 at 02:51:58PM +0400, Michael Tokarev wrote:
>[..]
> Test machine was using MPTSAS driver for the following card:
>   SCSI storage controller: LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS (rev 02)
> 
> Pretty similar results were obtained on an AHCI controller:
>   SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage Controller AHCI (rev 01)
> on another machines.

Are you sure that NCQ was enabled between the controller and drive? 
Did you verify this? I know about some versions that disable NCQ 
support internally in their firmware (something to do with bugs in
error handling).

-- 
Dan Aloni
XIV LTD, http://www.xivstorage.com
da-x (at) monatomic.org, dan (at) xiv.co.il
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux