Hi;
Following patch removes trailing whitespaces at the ends of lines and converts
smarttabs/whitespaces into real tabs.
Signed-off-by: S.Çağlar Onur <[email protected]>
drivers/usb/storage/unusual_devs.h | 188
++++++++++++++++++------------------
1 files changed, 94 insertions(+), 94 deletions(-)
diff --git a/drivers/usb/storage/unusual_devs.h
b/drivers/usb/storage/unusual_devs.h
index 54979c2..b6bf31a 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -50,10 +50,10 @@
/* patch submitted by Vivian Bregier <[email protected]>
*/
UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100,
- "ATMEL",
- "SND1 Storage",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE),
+ "ATMEL",
+ "SND1 Storage",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE),
/* modified by Tobias Lorenz <[email protected]> */
UNUSUAL_DEV( 0x03ee, 0x6901, 0x0000, 0x0200,
@@ -69,18 +69,18 @@ UNUSUAL_DEV( 0x03ee, 0x6906, 0x0003, 0x0003,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200,
+UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200,
"HP",
"CD-Writer+",
- US_SC_8070, US_PR_CB, NULL, 0),
+ US_SC_8070, US_PR_CB, NULL, 0),
#ifdef CONFIG_USB_STORAGE_USBAT
-UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001,
+UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001,
"HP",
"CD-Writer+ 8200e",
US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
-UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
+UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
"HP",
"CD-Writer+ CD-4e",
US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
@@ -115,10 +115,10 @@ UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113,
/* Submitted by Ernestas Vaiciukevicius <[email protected]> */
UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100,
- "Samsung Info. Systems America, Inc.",
- "MP3 Player",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
+ "Samsung Info. Systems America, Inc.",
+ "MP3 Player",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
/* Reported by Orgad Shaneh <[email protected]> */
UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100,
@@ -256,10 +256,10 @@ UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100,
* the revision to my model only
*/
UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100,
- "USB 2.0",
- "Flash Disk",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_NOT_LOCKABLE ),
+ "USB 2.0",
+ "Flash Disk",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_NOT_LOCKABLE ),
#ifdef CONFIG_USB_STORAGE_KARMA
UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101,
@@ -408,19 +408,19 @@ UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999,
/* Most of the following entries were developed with the help of
* Shuttle/SCM directly.
*/
-UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200,
+UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200,
"Matshita",
"LS-120",
US_SC_8020, US_PR_CB, NULL, 0),
-UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100,
+UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100,
"Shuttle",
"eUSCSI Bridge",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
- US_FL_SCM_MULT_TARG ),
+ US_FL_SCM_MULT_TARG ),
#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999,
+UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999,
"Sandisk",
"ImageMate SDDR09",
US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
@@ -431,52 +431,52 @@ UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
"SCM Microsystems",
"eUSB SmartMedia / CompactFlash Adapter",
US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
- 0),
+ 0),
#endif
/* Reported by Markus Demleitner <[email protected]> */
-UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100,
+UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100,
"SCM Microsystems Inc.",
"eUSB MMC Adapter",
- US_SC_SCSI, US_PR_CB, NULL,
- US_FL_SINGLE_LUN),
+ US_SC_SCSI, US_PR_CB, NULL,
+ US_FL_SINGLE_LUN),
/* Reported by Daniel Nouri <[email protected]> */
-UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205,
+UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205,
"Shuttle",
"eUSB MMC Adapter",
- US_SC_SCSI, US_PR_DEVICE, NULL,
- US_FL_SINGLE_LUN),
+ US_SC_SCSI, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN),
-UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200,
+UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200,
"Sony",
"Hifd",
- US_SC_SCSI, US_PR_CB, NULL,
- US_FL_SINGLE_LUN),
+ US_SC_SCSI, US_PR_CB, NULL,
+ US_FL_SINGLE_LUN),
-UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200,
+UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200,
"Shuttle",
"eUSB ATA/ATAPI Adapter",
US_SC_8020, US_PR_CB, NULL, 0),
-UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200,
+UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200,
"Shuttle",
"eUSB CompactFlash Adapter",
US_SC_8020, US_PR_CB, NULL, 0),
-UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100,
+UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100,
"Shuttle",
"eUSCSI Bridge",
- US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+ US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
-UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100,
+UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100,
"Shuttle",
"eUSCSI Bridge",
- US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
- US_FL_SCM_MULT_TARG ),
+ US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
-UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200,
+UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200,
"Shuttle",
"CD-RW Device",
US_SC_8020, US_PR_CB, NULL, 0),
@@ -556,9 +556,9 @@ UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450,
+UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450,
"Sony",
- "DSC-S30/S70/S75/505V/F505/F707/F717/P8",
+ "DSC-S30/S70/S75/505V/F505/F707/F717/P8",
US_SC_SCSI, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
@@ -572,7 +572,7 @@ UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610,
/* Reported by [email protected] */
-UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100,
+UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100,
"Sony",
"Memorystick NW-MS7",
US_SC_DEVICE, US_PR_DEVICE, NULL,
@@ -593,21 +593,21 @@ UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
-UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100,
+UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100,
"Sony",
"Memorystick MSAC-US1",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Submitted by Klaus Mueller <[email protected]> */
-UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310,
+UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310,
"Sony",
"Handycam",
US_SC_SCSI, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Submitted by Rajesh Kumble Nayak <[email protected]> */
-UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500,
+UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500,
"Sony",
"Handycam HC-85",
US_SC_UFI, US_PR_DEVICE, NULL,
@@ -648,26 +648,26 @@ UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999,
/* Submitted by Frank Engel <[email protected]> */
UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999,
- "Sony",
- "PEG Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_INQUIRY ),
+ "Sony",
+ "PEG Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
/* floppy reports multiple luns */
UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210,
- "SAMSUNG",
- "SFD-321U [FW 0C]",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_SINGLE_LUN ),
+ "SAMSUNG",
+ "SFD-321U [FW 0C]",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
-UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299,
+UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299,
"Y-E Data",
"Flashbuster-U",
US_SC_DEVICE, US_PR_CB, NULL,
US_FL_SINGLE_LUN),
-UNUSUAL_DEV( 0x057b, 0x0000, 0x0300, 0x9999,
+UNUSUAL_DEV( 0x057b, 0x0000, 0x0300, 0x9999,
"Y-E Data",
"Flashbuster-U",
US_SC_DEVICE, US_PR_DEVICE, NULL,
@@ -677,7 +677,7 @@ UNUSUAL_DEV( 0x057b, 0x0000, 0x0300, 0x9999,
* This entry is needed only because the device reports
* bInterfaceClass = 0xff (vendor-specific)
*/
-UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999,
+UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999,
"Y-E Data",
"Silicon Media R/W",
US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
@@ -825,13 +825,13 @@ UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999,
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_FIX_INQUIRY ),
-UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100,
+UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100,
"TEAC",
"Floppy Drive",
- US_SC_UFI, US_PR_CB, NULL, 0 ),
+ US_SC_UFI, US_PR_CB, NULL, 0 ),
#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100,
+UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100,
"Olympus",
"Camedia MAUSB-2",
US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
@@ -867,14 +867,14 @@ UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
/* Reported by Miguel A. Fosas <[email protected]> */
UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001,
- "Minolta",
- "DIMAGE E223",
- US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),
+ "Minolta",
+ "DIMAGE E223",
+ US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),
UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100,
"Hagiwara",
"Flashgate",
- US_SC_SCSI, US_PR_BULK, NULL, 0 ),
+ US_SC_SCSI, US_PR_BULK, NULL, 0 ),
/* Reported by David Hamilton <[email protected]> */
UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001,
@@ -918,7 +918,7 @@ UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
US_FL_SINGLE_LUN ),
#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999,
+UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999,
"Sandisk",
"ImageMate SDDR-09",
US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
@@ -939,17 +939,17 @@ UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
-UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133,
+UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133,
"Microtech",
"USB-SCSI-DB25",
US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
-UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
+UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
"Microtech",
"USB-SCSI-HD50",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
- US_FL_SCM_MULT_TARG ),
+ US_FL_SCM_MULT_TARG ),
#ifdef CONFIG_USB_STORAGE_DPCM
UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
@@ -1053,10 +1053,10 @@ UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
* as "DualSlot CompactFlash(TM) & MStick Drive USB"
*/
UNUSUAL_DEV( 0x07c4, 0xa10b, 0x0000, 0xffff,
- "DataFab Systems Inc.",
- "USB CF+MS",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
- 0 ),
+ "DataFab Systems Inc.",
+ "USB CF+MS",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0 ),
#endif
@@ -1119,10 +1119,10 @@ UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
* US_FL_IGNORE_RESIDUE Needed
*/
UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100,
- "AIPTEK",
- "Aiptek USB Keychain MP3 Player",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE),
+ "AIPTEK",
+ "Aiptek USB Keychain MP3 Player",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE),
/* Entry needed for flags. Moreover, all devices with this ID use
* bulk-only transport, but _some_ falsely report Control/Bulk instead.
@@ -1166,26 +1166,26 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
* Submitted by James Courtier-Dutton <[email protected]>
*/
UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
- "Pentax",
- "Optio 2/3/400",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_INQUIRY ),
+ "Pentax",
+ "Optio 2/3/400",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
/* Submitted by Per Winkvist <[email protected]> */
UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff,
- "Pentax",
- "Optio S/S4",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_INQUIRY ),
+ "Pentax",
+ "Optio S/S4",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
/* These are virtual windows driver CDs, which the zd1211rw driver
* automatically converts into WLAN devices. */
UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
- "ZyXEL",
- "G-220F USB-WLAN Install",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_DEVICE ),
+ "ZyXEL",
+ "G-220F USB-WLAN Install",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_DEVICE ),
UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
"SiteCom",
@@ -1211,17 +1211,17 @@ UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
#ifdef CONFIG_USB_STORAGE_DATAFAB
UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
- "Acomdata",
- "CF",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
- US_FL_SINGLE_LUN ),
+ "Acomdata",
+ "CF",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ US_FL_SINGLE_LUN ),
#endif
#ifdef CONFIG_USB_STORAGE_SDDR55
UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
- "Acomdata",
- "SM",
- US_SC_SCSI, US_PR_SDDR55, NULL,
- US_FL_SINGLE_LUN ),
+ "Acomdata",
+ "SM",
+ US_SC_SCSI, US_PR_SDDR55, NULL,
+ US_FL_SINGLE_LUN ),
#endif
/* Submitted by: Nick Sillik <[email protected]>
--
S.Çağlar Onur <[email protected]>
http://cekirdek.pardus.org.tr/~caglar/
Linux is like living in a teepee. No Windows, no Gates and an Apache in house!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
