Note, this includes libertas ioctl removal.
For the record, I do not object to keeping the mesh ioctls, since no
one even has a -proposal- for mesh infrastructure, much less code.
But whatever. The current state is not a crime either.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git upstream-linus
to receive the following updates:
MAINTAINERS | 8 +-
drivers/net/gianfar.c | 2 +-
drivers/net/myri10ge/myri10ge.c | 2 +
drivers/net/netxen/netxen_nic.h | 180 +++++-
drivers/net/netxen/netxen_nic_hdr.h | 2 +
drivers/net/netxen/netxen_nic_hw.c | 33 +-
drivers/net/netxen/netxen_nic_init.c | 51 +-
drivers/net/netxen/netxen_nic_main.c | 177 +++--
drivers/net/netxen/netxen_nic_phan_reg.h | 14 +
drivers/net/ns83820.c | 4 +-
drivers/net/pcmcia/3c589_cs.c | 2 +-
drivers/net/starfire.c | 2 +-
drivers/net/usb/cdc_ether.c | 8 +-
drivers/net/usb/dm9601.c | 11 +-
drivers/net/usb/usbnet.c | 9 +-
drivers/net/wireless/libertas/Makefile | 2 +-
drivers/net/wireless/libertas/README | 275 --------
drivers/net/wireless/libertas/assoc.c | 28 +-
drivers/net/wireless/libertas/cmd.c | 12 +-
drivers/net/wireless/libertas/cmdresp.c | 21 +
drivers/net/wireless/libertas/hostcmd.h | 2 +-
drivers/net/wireless/libertas/ioctl.c | 1081 ------------------------------
drivers/net/wireless/libertas/main.c | 8 +-
drivers/net/wireless/libertas/scan.c | 51 +-
drivers/net/wireless/libertas/wext.c | 152 -----
drivers/net/wireless/libertas/wext.h | 45 +--
26 files changed, 447 insertions(+), 1735 deletions(-)
delete mode 100644 drivers/net/wireless/libertas/ioctl.c
Adrian Bunk (1):
drivers/net/ns83820.c: fix a check-after-use
Dan Williams (4):
libertas: style fixes
libertas: kill wlan_scan_process_results
libertas: fix WPA associations by handling ENABLE_RSN correctly
libertas: remove private ioctls
David Brownell (1):
net/usb/cdc_ether minor sparse cleanup
Dhananjay Phadke (1):
RESEND [PATCH 3/3] NetXen: Graceful teardown of interface and hardware upon module unload
Kumar Gala (1):
gianfar: Fix typo bug introduced by move to udp_hdr()
Maik Hampel (1):
myri10ge: SET_NETDEV_DEV()
Patrick McHardy (1):
3c589_cs: fix local_bh_enable warning
Peter Korsgaard (4):
dm9601: HW header size shouldn't be included in packet length
usbnet: Zero padding byte if there is tail room in skb
Update MAINTAINERS for USB network devices
dm9601: Return 0 from bind() on success
[email protected] (2):
RESEND [PATCH 1/3] NetXen: Fix issue of MSI not working correctly
RESEND [PATCH 2/3] NetXen: Support per PCI-function interrupt mask registers
maximilian attems (1):
starfire list alpha as 64 bit arch
diff --git a/MAINTAINERS b/MAINTAINERS
index 4ce895a..23a04f4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3618,7 +3618,7 @@ W: http://www.kroah.com/linux-usb/
USB DAVICOM DM9601 DRIVER
P: Peter Korsgaard
M: [email protected]
-L: [email protected]
+L: [email protected]
W: http://www.linux-usb.org/usbnet
S: Maintained
@@ -3702,8 +3702,8 @@ S: Maintained
USB PEGASUS DRIVER
P: Petko Manolov
M: [email protected]
-L: [email protected]
L: [email protected]
+L: [email protected]
W: http://pegasus2.sourceforge.net/
S: Maintained
@@ -3717,8 +3717,8 @@ S: Maintained
USB RTL8150 DRIVER
P: Petko Manolov
M: [email protected]
-L: [email protected]
L: [email protected]
+L: [email protected]
W: http://pegasus2.sourceforge.net/
S: Maintained
@@ -3829,7 +3829,7 @@ S: Maintained
USB "USBNET" DRIVER FRAMEWORK
P: David Brownell
M: [email protected]
-L: [email protected]
+L: [email protected]
W: http://www.linux-usb.org/usbnet
S: Maintained
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 6822bf1..1b854bf 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -944,7 +944,7 @@ static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb)
flags |= TXFCB_UDP;
fcb->phcs = udp_hdr(skb)->check;
} else
- fcb->phcs = udp_hdr(skb)->check;
+ fcb->phcs = tcp_hdr(skb)->check;
/* l3os is the distance between the start of the
* frame (skb->data) and the start of the IP hdr.
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 0f9904f..d0cc122 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -2854,6 +2854,8 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return -ENOMEM;
}
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
mgp = netdev_priv(netdev);
memset(mgp, 0, sizeof(*mgp));
mgp->dev = netdev;
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 91f25e0..6195037 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -937,6 +937,7 @@ struct netxen_adapter {
struct netxen_ring_ctx *ctx_desc;
struct pci_dev *ctx_desc_pdev;
dma_addr_t ctx_desc_phys_addr;
+ int intr_scheme;
int (*enable_phy_interrupts) (struct netxen_adapter *);
int (*disable_phy_interrupts) (struct netxen_adapter *);
void (*handle_phy_intr) (struct netxen_adapter *);
@@ -951,6 +952,24 @@ struct netxen_adapter {
int (*stop_port) (struct netxen_adapter *);
}; /* netxen_adapter structure */
+/*
+ * NetXen dma watchdog control structure
+ *
+ * Bit 0 : enabled => R/O: 1 watchdog active, 0 inactive
+ * Bit 1 : disable_request => 1 req disable dma watchdog
+ * Bit 2 : enable_request => 1 req enable dma watchdog
+ * Bit 3-31 : unused
+ */
+
+#define netxen_set_dma_watchdog_disable_req(config_word) \
+ _netxen_set_bits(config_word, 1, 1, 1)
+#define netxen_set_dma_watchdog_enable_req(config_word) \
+ _netxen_set_bits(config_word, 2, 1, 1)
+#define netxen_get_dma_watchdog_enabled(config_word) \
+ ((config_word) & 0x1)
+#define netxen_get_dma_watchdog_disabled(config_word) \
+ (((config_word) >> 1) & 0x1)
+
/* Max number of xmit producer threads that can run simultaneously */
#define MAX_XMIT_PRODUCERS 16
@@ -1030,8 +1049,8 @@ int netxen_nic_erase_pxe(struct netxen_adapter *adapter);
/* Functions from netxen_nic_init.c */
void netxen_free_adapter_offload(struct netxen_adapter *adapter);
int netxen_initialize_adapter_offload(struct netxen_adapter *adapter);
-void netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val);
-void netxen_load_firmware(struct netxen_adapter *adapter);
+int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val);
+int netxen_load_firmware(struct netxen_adapter *adapter);
int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose);
int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp);
int netxen_rom_fast_read_words(struct netxen_adapter *adapter, int addr,
@@ -1080,37 +1099,106 @@ struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev);
static inline void netxen_nic_disable_int(struct netxen_adapter *adapter)
{
- /*
- * ISR_INT_MASK: Can be read from window 0 or 1.
- */
- writel(0x7ff, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
+ uint32_t mask = 0x7ff;
+ int retries = 32;
+
+ DPRINTK(1, INFO, "Entered ISR Disable \n");
+
+ switch (adapter->portnum) {
+ case 0:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
+ break;
+ case 1:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
+ break;
+ case 2:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
+ break;
+ case 3:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
+ break;
+ }
+ if (adapter->intr_scheme != -1 &&
+ adapter->intr_scheme != INTR_SCHEME_PERPORT) {
+ writel(mask,
+ (void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK)));
+ }
+
+ /* Window = 0 or 1 */
+ if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
+ do {
+ writel(0xffffffff, (void *)
+ (PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_STATUS)));
+ mask = readl((void *)
+ (pci_base_offset(adapter, ISR_INT_VECTOR)));
+ if (!(mask & 0x80))
+ break;
+ udelay(10);
+ } while (--retries);
+
+ if (!retries) {
+ printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
+ netxen_nic_driver_name);
+ }
+ }
+
+ DPRINTK(1, INFO, "Done with Disable Int\n");
+
+ return;
}
static inline void netxen_nic_enable_int(struct netxen_adapter *adapter)
{
u32 mask;
- switch (adapter->ahw.board_type) {
- case NETXEN_NIC_GBE:
- mask = 0x77b;
+ DPRINTK(1, INFO, "Entered ISR Enable \n");
+
+ if (adapter->intr_scheme != -1 &&
+ adapter->intr_scheme != INTR_SCHEME_PERPORT) {
+ switch (adapter->ahw.board_type) {
+ case NETXEN_NIC_GBE:
+ mask = 0x77b;
+ break;
+ case NETXEN_NIC_XGBE:
+ mask = 0x77f;
+ break;
+ default:
+ mask = 0x7ff;
+ break;
+ }
+
+ writel(mask,
+ (void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK)));
+ }
+ switch (adapter->portnum) {
+ case 0:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
+ break;
+ case 1:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
break;
- case NETXEN_NIC_XGBE:
- mask = 0x77f;
+ case 2:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
break;
- default:
- mask = 0x7ff;
+ case 3:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
break;
}
- writel(mask, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
-
if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
mask = 0xbff;
- writel(0X0, NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
- writel(mask, PCI_OFFSET_SECOND_RANGE(adapter,
- ISR_INT_TARGET_MASK));
+ if (adapter->intr_scheme != -1 &&
+ adapter->intr_scheme != INTR_SCHEME_PERPORT) {
+ writel(0X0, NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
+ }
+ writel(mask,
+ (void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_MASK)));
}
+
+ DPRINTK(1, INFO, "Done with enable Int\n");
+
+ return;
}
/*
@@ -1164,6 +1252,62 @@ static inline void get_brd_name_by_type(u32 type, char *name)
name = "Unknown";
}
+static inline int
+dma_watchdog_shutdown_request(struct netxen_adapter *adapter)
+{
+ u32 ctrl;
+
+ /* check if already inactive */
+ if (netxen_nic_hw_read_wx(adapter,
+ NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), &ctrl, 4))
+ printk(KERN_ERR "failed to read dma watchdog status\n");
+
+ if (netxen_get_dma_watchdog_enabled(ctrl) == 0)
+ return 1;
+
+ /* Send the disable request */
+ netxen_set_dma_watchdog_disable_req(ctrl);
+ netxen_crb_writelit_adapter(adapter,
+ NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), ctrl);
+
+ return 0;
+}
+
+static inline int
+dma_watchdog_shutdown_poll_result(struct netxen_adapter *adapter)
+{
+ u32 ctrl;
+
+ if (netxen_nic_hw_read_wx(adapter,
+ NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), &ctrl, 4))
+ printk(KERN_ERR "failed to read dma watchdog status\n");
+
+ return ((netxen_get_dma_watchdog_enabled(ctrl) == 0) &&
+ (netxen_get_dma_watchdog_disabled(ctrl) == 0));
+}
+
+static inline int
+dma_watchdog_wakeup(struct netxen_adapter *adapter)
+{
+ u32 ctrl;
+
+ if (netxen_nic_hw_read_wx(adapter,
+ NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), &ctrl, 4))
+ printk(KERN_ERR "failed to read dma watchdog status\n");
+
+ if (netxen_get_dma_watchdog_enabled(ctrl))
+ return 1;
+
+ /* send the wakeup request */
+ netxen_set_dma_watchdog_enable_req(ctrl);
+
+ netxen_crb_writelit_adapter(adapter,
+ NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), ctrl);
+
+ return 0;
+}
+
+
int netxen_is_flash_supported(struct netxen_adapter *adapter);
int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, u64 mac[]);
extern void netxen_change_ringparam(struct netxen_adapter *adapter);
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 608e37b..3276866 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -687,4 +687,6 @@ enum {
#define PCIE_MAX_MASTER_SPLIT (0x14048)
+#define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL (0x14)
+
#endif /* __NETXEN_NIC_HDR_H_ */
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index c012764..aac1542 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -377,7 +377,7 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
recv_crb_registers[ctx].
crb_rcvpeg_state));
while (state != PHAN_PEG_RCV_INITIALIZED && loops < 20) {
- udelay(100);
+ msleep(1);
/* Window 1 call */
state = readl(NETXEN_CRB_NORMALIZE(adapter,
recv_crb_registers
@@ -392,7 +392,11 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
return err;
}
}
- DPRINTK(INFO, "Recieve Peg ready too. starting stuff\n");
+ adapter->intr_scheme = readl(
+ NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_FW));
+ printk(KERN_NOTICE "%s: FW capabilities:0x%x\n", netxen_nic_driver_name,
+ adapter->intr_scheme);
+ DPRINTK(INFO, "Receive Peg ready too. starting stuff\n");
addr = netxen_alloc(adapter->ahw.pdev,
sizeof(struct netxen_ring_ctx) +
@@ -697,7 +701,7 @@ void netxen_nic_pci_change_crbwindow(struct netxen_adapter *adapter, u32 wndw)
adapter->curr_window = 0;
}
-void netxen_load_firmware(struct netxen_adapter *adapter)
+int netxen_load_firmware(struct netxen_adapter *adapter)
{
int i;
u32 data, size = 0;
@@ -709,15 +713,24 @@ void netxen_load_firmware(struct netxen_adapter *adapter)
writel(1, NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_CAS_RST));
for (i = 0; i < size; i++) {
- if (netxen_rom_fast_read(adapter, flashaddr, (int *)&data) != 0) {
- DPRINTK(ERR,
- "Error in netxen_rom_fast_read(). Will skip"
- "loading flash image\n");
- return;
- }
+ int retries = 10;
+ if (netxen_rom_fast_read(adapter, flashaddr, (int *)&data) != 0)
+ return -EIO;
+
off = netxen_nic_pci_set_window(adapter, memaddr);
addr = pci_base_offset(adapter, off);
writel(data, addr);
+ do {
+ if (readl(addr) == data)
+ break;
+ msleep(100);
+ writel(data, addr);
+ } while (--retries);
+ if (!retries) {
+ printk(KERN_ERR "%s: firmware load aborted, write failed at 0x%x\n",
+ netxen_nic_driver_name, memaddr);
+ return -EIO;
+ }
flashaddr += 4;
memaddr += 4;
}
@@ -727,7 +740,7 @@ void netxen_load_firmware(struct netxen_adapter *adapter)
NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_CHIP_CLK_CTRL));
writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_CAS_RST));
- udelay(100);
+ return 0;
}
int
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index bb23f4c..1811bcb 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -139,6 +139,8 @@ int netxen_init_firmware(struct netxen_adapter *adapter)
return err;
}
/* Window 1 call */
+ writel(INTR_SCHEME_PERPORT,
+ NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_HOST));
writel(MPORT_MULTI_FUNCTION_MODE,
NETXEN_CRB_NORMALIZE(adapter, CRB_MPORT_MODE));
writel(PHAN_INITIALIZE_ACK,
@@ -405,10 +407,7 @@ static inline int do_rom_fast_write(struct netxen_adapter *adapter, int addr,
static inline int
do_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp)
{
- if (jiffies > (last_schedule_time + (8 * HZ))) {
- last_schedule_time = jiffies;
- schedule();
- }
+ cond_resched();
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr);
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
@@ -854,10 +853,10 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
netxen_nic_pci_change_crbwindow(adapter, 1);
}
if (init_delay == 1) {
- ssleep(1);
+ msleep(2000);
init_delay = 0;
}
- msleep(1);
+ msleep(20);
}
kfree(buf);
@@ -933,10 +932,6 @@ int netxen_initialize_adapter_offload(struct netxen_adapter *adapter)
void netxen_free_adapter_offload(struct netxen_adapter *adapter)
{
if (adapter->dummy_dma.addr) {
- writel(0, NETXEN_CRB_NORMALIZE(adapter,
- CRB_HOST_DUMMY_BUF_ADDR_HI));
- writel(0, NETXEN_CRB_NORMALIZE(adapter,
- CRB_HOST_DUMMY_BUF_ADDR_LO));
pci_free_consistent(adapter->ahw.pdev,
NETXEN_HOST_DUMMY_DMA_SIZE,
adapter->dummy_dma.addr,
@@ -945,25 +940,32 @@ void netxen_free_adapter_offload(struct netxen_adapter *adapter)
}
}
-void netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val)
+int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val)
{
u32 val = 0;
- int loops = 0;
+ int retries = 30;
if (!pegtune_val) {
- val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
- while (val != PHAN_INITIALIZE_COMPLETE &&
- val != PHAN_INITIALIZE_ACK && loops < 200000) {
- udelay(100);
- schedule();
- val =
- readl(NETXEN_CRB_NORMALIZE
+ do {
+ val = readl(NETXEN_CRB_NORMALIZE
(adapter, CRB_CMDPEG_STATE));
- loops++;
+ pegtune_val = readl(NETXEN_CRB_NORMALIZE
+ (adapter, NETXEN_ROMUSB_GLB_PEGTUNE_DONE));
+
+ if (val == PHAN_INITIALIZE_COMPLETE ||
+ val == PHAN_INITIALIZE_ACK)
+ return 0;
+
+ msleep(1000);
+ } while (--retries);
+ if (!retries) {
+ printk(KERN_WARNING "netxen_phantom_init: init failed, "
+ "pegtune_val=%x\n", pegtune_val);
+ return -1;
}
- if (val != PHAN_INITIALIZE_COMPLETE)
- printk("WARNING: Initial boot wait loop failed...\n");
}
+
+ return 0;
}
int netxen_nic_rx_has_work(struct netxen_adapter *adapter)
@@ -1120,6 +1122,7 @@ netxen_process_rcv(struct netxen_adapter *adapter, int ctxid,
adapter->stats.csummed++;
skb->ip_summed = CHECKSUM_UNNECESSARY;
}
+ skb->dev = netdev;
if (desc_ctx == RCV_DESC_LRO_CTXID) {
/* True length was only available on the last pkt */
skb_put(skb, buffer->lro_length);
@@ -1224,6 +1227,7 @@ u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctxid, int max)
NETXEN_CRB_NORMALIZE(adapter,
recv_crb_registers[adapter->portnum].
crb_rcv_status_consumer));
+ wmb();
}
return count;
@@ -1276,11 +1280,13 @@ int netxen_process_cmd_ring(unsigned long data)
if (skb && (cmpxchg(&buffer->skb, skb, 0) == skb)) {
pci_unmap_single(pdev, frag->dma, frag->length,
PCI_DMA_TODEVICE);
+ frag->dma = 0ULL;
for (i = 1; i < buffer->frag_count; i++) {
DPRINTK(INFO, "getting fragment no %d\n", i);
frag++; /* Get the next frag */
pci_unmap_page(pdev, frag->dma, frag->length,
PCI_DMA_TODEVICE);
+ frag->dma = 0ULL;
}
adapter->stats.skbfreed++;
@@ -1446,6 +1452,7 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
writel(msg,
DB_NORMALIZE(adapter,
NETXEN_RCV_PRODUCER_OFFSET));
+ wmb();
}
}
}
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 6167b58..a66ff58 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -308,7 +308,13 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
adapter->netdev = netdev;
adapter->pdev = pdev;
+
+ /* this will be read from FW later */
+ adapter->intr_scheme = -1;
+
+ /* This will be reset for mezz cards */
adapter->portnum = pci_func_id;
+ adapter->status &= ~NETXEN_NETDEV_STATUS;
netdev->open = netxen_nic_open;
netdev->stop = netxen_nic_close;
@@ -336,11 +342,9 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- if (pci_enable_msi(pdev)) {
+ if (pci_enable_msi(pdev))
adapter->flags &= ~NETXEN_NIC_MSI_ENABLED;
- printk(KERN_WARNING "%s: unable to allocate MSI interrupt"
- " error\n", netxen_nic_driver_name);
- } else
+ else
adapter->flags |= NETXEN_NIC_MSI_ENABLED;
netdev->irq = pdev->irq;
@@ -355,13 +359,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* initialize the adapter */
netxen_initialize_adapter_hw(adapter);
-#ifdef CONFIG_PPC
- if ((adapter->ahw.boardcfg.board_type ==
- NETXEN_BRDTYPE_P2_SB31_10G_IMEZ) &&
- (pci_func_id == 2))
- goto err_out_free_adapter;
-#endif /* CONFIG_PPC */
-
/*
* Adapter in our case is quad port so initialize it before
* initializing the ports
@@ -509,22 +506,30 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
NETXEN_CAM_RAM(0x1fc)));
if (val == 0x55555555) {
/* This is the first boot after power up */
+ netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(0x4), &val);
+ if (!(val & 0x4)) {
+ val |= 0x4;
+ netxen_nic_write_w0(adapter, NETXEN_PCIE_REG(0x4), val);
+ netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(0x4), &val);
+ if (!(val & 0x4))
+ printk(KERN_ERR "%s: failed to set MSI bit in PCI-e reg\n",
+ netxen_nic_driver_name);
+ }
val = readl(NETXEN_CRB_NORMALIZE(adapter,
NETXEN_ROMUSB_GLB_SW_RESET));
printk(KERN_INFO"NetXen: read 0x%08x for reset reg.\n",val);
if (val != 0x80000f) {
/* clear the register for future unloads/loads */
- writel(0, NETXEN_CRB_NORMALIZE(adapter,
- NETXEN_CAM_RAM(0x1fc)));
- printk(KERN_ERR "ERROR in NetXen HW init sequence.\n");
- err = -ENODEV;
- goto err_out_free_dev;
+ writel(0, NETXEN_CRB_NORMALIZE(adapter,
+ NETXEN_CAM_RAM(0x1fc)));
+ printk(KERN_ERR "ERROR in NetXen HW init sequence.\n");
+ err = -ENODEV;
+ goto err_out_free_dev;
}
-
- /* clear the register for future unloads/loads */
- writel(0, NETXEN_CRB_NORMALIZE(adapter,
- NETXEN_CAM_RAM(0x1fc)));
}
+
+ /* clear the register for future unloads/loads */
+ writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
printk(KERN_INFO "State: 0x%0x\n",
readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
@@ -542,13 +547,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
NETXEN_ROMUSB_GLB_PEGTUNE_DONE));
/* Handshake with the card before we register the devices. */
netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
-
- /* leave the hw in the same state as reboot */
- writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
- netxen_pinit_from_rom(adapter, 0);
- udelay(500);
- netxen_load_firmware(adapter);
- netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
}
/*
@@ -639,8 +637,8 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
struct netxen_rx_buffer *buffer;
struct netxen_recv_context *recv_ctx;
struct netxen_rcv_desc_ctx *rcv_desc;
- int i;
- int ctxid, ring;
+ int i, ctxid, ring;
+ static int init_firmware_done = 0;
adapter = pci_get_drvdata(pdev);
if (adapter == NULL)
@@ -648,30 +646,20 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
netdev = adapter->netdev;
- netxen_nic_disable_int(adapter);
- if (adapter->irq)
- free_irq(adapter->irq, adapter);
-
+ unregister_netdev(netdev);
+
if (adapter->stop_port)
adapter->stop_port(adapter);
- if ((adapter->flags & NETXEN_NIC_MSI_ENABLED))
- pci_disable_msi(pdev);
-
- if (adapter->portnum == 0)
- netxen_free_adapter_offload(adapter);
+ netxen_nic_disable_int(adapter);
- if(adapter->portnum == 0) {
- /* leave the hw in the same state as reboot */
- writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
- netxen_pinit_from_rom(adapter, 0);
- udelay(500);
- netxen_load_firmware(adapter);
- netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
- }
+ if (adapter->irq)
+ free_irq(adapter->irq, adapter);
- if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC)
+ if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
+ init_firmware_done++;
netxen_free_hw_resources(adapter);
+ }
for (ctxid = 0; ctxid < MAX_RCV_CTX; ++ctxid) {
recv_ctx = &adapter->recv_ctx[ctxid];
@@ -691,17 +679,73 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
}
}
- unregister_netdev(netdev);
+ if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
+ pci_disable_msi(pdev);
vfree(adapter->cmd_buf_arr);
+ pci_disable_device(pdev);
+
+ if (adapter->portnum == 0) {
+ if (init_firmware_done) {
+ dma_watchdog_shutdown_request(adapter);
+ msleep(100);
+ i = 100;
+ while ((dma_watchdog_shutdown_poll_result(adapter) != 1) && i) {
+ printk(KERN_INFO "dma_watchdog_shutdown_poll still in progress\n");
+ msleep(100);
+ i--;
+ }
+
+ if (i == 0) {
+ printk(KERN_ERR "dma_watchdog_shutdown_request failed\n");
+ return;
+ }
+
+ /* clear the register for future unloads/loads */
+ writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
+ printk(KERN_INFO "State: 0x%0x\n",
+ readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
+
+ /* leave the hw in the same state as reboot */
+ writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
+ if (netxen_pinit_from_rom(adapter, 0))
+ return;
+ msleep(1);
+ if (netxen_load_firmware(adapter))
+ return;
+ netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
+ }
+
+ /* clear the register for future unloads/loads */
+ writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
+ printk(KERN_INFO "State: 0x%0x\n",
+ readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
+
+ dma_watchdog_shutdown_request(adapter);
+ msleep(100);
+ i = 100;
+ while ((dma_watchdog_shutdown_poll_result(adapter) != 1) && i) {
+ printk(KERN_INFO "dma_watchdog_shutdown_poll still in progress\n");
+ msleep(100);
+ i--;
+ }
+
+ if (i) {
+ netxen_free_adapter_offload(adapter);
+ } else {
+ printk(KERN_ERR "failed to dma shutdown\n");
+ return;
+ }
+
+ }
+
iounmap(adapter->ahw.db_base);
iounmap(adapter->ahw.pci_base0);
iounmap(adapter->ahw.pci_base1);
iounmap(adapter->ahw.pci_base2);
pci_release_regions(pdev);
- pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
free_netdev(netdev);
@@ -798,7 +842,7 @@ static int netxen_nic_close(struct net_device *netdev)
if (buffrag->dma) {
pci_unmap_single(adapter->pdev, buffrag->dma,
buffrag->length, PCI_DMA_TODEVICE);
- buffrag->dma = (u64) NULL;
+ buffrag->dma = 0ULL;
}
for (j = 0; j < cmd_buff->frag_count; j++) {
buffrag++;
@@ -806,7 +850,7 @@ static int netxen_nic_close(struct net_device *netdev)
pci_unmap_page(adapter->pdev, buffrag->dma,
buffrag->length,
PCI_DMA_TODEVICE);
- buffrag->dma = (u64) NULL;
+ buffrag->dma = 0ULL;
}
}
/* Free the skb we received in netxen_nic_xmit_frame */
@@ -816,8 +860,10 @@ static int netxen_nic_close(struct net_device *netdev)
}
cmd_buff++;
}
- FLUSH_SCHEDULED_WORK();
- del_timer_sync(&adapter->watchdog_timer);
+ if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
+ FLUSH_SCHEDULED_WORK();
+ del_timer_sync(&adapter->watchdog_timer);
+ }
return 0;
}
@@ -1103,28 +1149,26 @@ static int
netxen_handle_int(struct netxen_adapter *adapter, struct net_device *netdev)
{
u32 ret = 0;
+ u32 our_int = 0;
DPRINTK(INFO, "Entered handle ISR\n");
adapter->stats.ints++;
if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
- int count = 0;
- u32 mask;
- u32 our_int = 0;
our_int = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
/* not our interrupt */
if ((our_int & (0x80 << adapter->portnum)) == 0)
return ret;
- netxen_nic_disable_int(adapter);
- /* Window = 0 or 1 */
- do {
- writel(0xffffffff, PCI_OFFSET_SECOND_RANGE(adapter,
- ISR_INT_TARGET_STATUS));
- mask = readl(pci_base_offset(adapter, ISR_INT_VECTOR));
- } while (((mask & 0x80) != 0) && (++count < 32));
- if ((mask & 0x80) != 0)
- printk("Could not disable interrupt completely\n");
+ }
+ netxen_nic_disable_int(adapter);
+
+ if (adapter->intr_scheme == INTR_SCHEME_PERPORT) {
+ /* claim interrupt */
+ if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
+ writel(our_int & ~((u32)(0x80 << adapter->portnum)),
+ NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
+ }
}
if (netxen_nic_rx_has_work(adapter) || netxen_nic_tx_has_work(adapter)) {
@@ -1136,7 +1180,7 @@ netxen_handle_int(struct netxen_adapter *adapter, struct net_device *netdev)
} else {
static unsigned int intcount = 0;
if ((++intcount & 0xfff) == 0xfff)
- printk(KERN_ERR
+ DPRINTK(KERN_ERR
"%s: %s interrupt %d while in poll\n",
netxen_nic_driver_name, netdev->name,
intcount);
@@ -1258,6 +1302,7 @@ static void __exit netxen_exit_module(void)
/*
* Wait for some time to allow the dma to drain, if any.
*/
+ msleep(100);
pci_unregister_driver(&netxen_driver);
destroy_workqueue(netxen_workq);
}
diff --git a/drivers/net/netxen/netxen_nic_phan_reg.h b/drivers/net/netxen/netxen_nic_phan_reg.h
index 9457fc7..10fe6fa 100644
--- a/drivers/net/netxen/netxen_nic_phan_reg.h
+++ b/drivers/net/netxen/netxen_nic_phan_reg.h
@@ -114,6 +114,20 @@
#define CRB_V2P_3 NETXEN_NIC_REG(0x29c)
#define CRB_V2P(port) (CRB_V2P_0+((port)*4))
#define CRB_DRIVER_VERSION NETXEN_NIC_REG(0x2a0)
+/* sw int status/mask registers */
+#define CRB_SW_INT_MASK_0 NETXEN_NIC_REG(0x1d8)
+#define CRB_SW_INT_MASK_1 NETXEN_NIC_REG(0x1e0)
+#define CRB_SW_INT_MASK_2 NETXEN_NIC_REG(0x1e4)
+#define CRB_SW_INT_MASK_3 NETXEN_NIC_REG(0x1e8)
+
+/*
+ * capabilities register, can be used to selectively enable/disable features
+ * for backward compability
+ */
+#define CRB_NIC_CAPABILITIES_HOST NETXEN_NIC_REG(0x1a8)
+#define CRB_NIC_CAPABILITIES_FW NETXEN_NIC_REG(0x1dc)
+
+#define INTR_SCHEME_PERPORT 0x1
/* used for ethtool tests */
#define CRB_SCRATCHPAD_TEST NETXEN_NIC_REG(0x280)
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index 717d8e9..104aab3 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -1831,11 +1831,13 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_
ndev = alloc_etherdev(sizeof(struct ns83820));
dev = PRIV(ndev);
- dev->ndev = ndev;
+
err = -ENOMEM;
if (!dev)
goto out;
+ dev->ndev = ndev;
+
spin_lock_init(&dev->rx_info.lock);
spin_lock_init(&dev->tx_lock);
spin_lock_init(&dev->misc_lock);
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 143ae2f..503f268 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -629,9 +629,9 @@ static int el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
outw(SetTxThreshold + 1536, ioaddr + EL3_CMD);
}
- dev_kfree_skb(skb);
pop_tx_status(dev);
spin_unlock_irqrestore(&priv->lock, flags);
+ dev_kfree_skb(skb);
return 0;
}
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 9d6e454..786d4b9 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -152,7 +152,7 @@ static int full_duplex[MAX_UNITS] = {0, };
* This SUCKS.
* We need a much better method to determine if dma_addr_t is 64-bit.
*/
-#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__mips64__) || (defined(__mips__) && defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR))
+#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__alpha__) || defined(__mips64__) || (defined(__mips__) && defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR))
/* 64-bit dma_addr_t */
#define ADDR_64BITS /* This chip uses 64 bit addresses. */
#define netdrv_addr_t u64
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 675ac99..a42acc3 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -144,14 +144,14 @@ int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
* modem interface from an RNDIS non-modem.
*/
if (rndis) {
- struct usb_cdc_acm_descriptor *d;
+ struct usb_cdc_acm_descriptor *acm;
- d = (void *) buf;
- if (d->bmCapabilities) {
+ acm = (void *) buf;
+ if (acm->bmCapabilities) {
dev_dbg(&intf->dev,
"ACM capabilities %02x, "
"not really RNDIS?\n",
- d->bmCapabilities);
+ acm->bmCapabilities);
goto bad_desc;
}
}
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index a676386..16c7a0e 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -414,18 +414,16 @@ static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf)
dev->mii.reg_num_mask = 0x1f;
/* reset */
- ret = dm_write_reg(dev, DM_NET_CTRL, 1);
+ dm_write_reg(dev, DM_NET_CTRL, 1);
udelay(20);
/* read MAC */
- ret = dm_read(dev, DM_PHY_ADDR, ETH_ALEN, dev->net->dev_addr);
- if (ret < 0) {
+ if (dm_read(dev, DM_PHY_ADDR, ETH_ALEN, dev->net->dev_addr) < 0) {
printk(KERN_ERR "Error reading MAC address\n");
ret = -ENODEV;
goto out;
}
-
/* power up phy */
dm_write_reg(dev, DM_GPR_CTRL, 1);
dm_write_reg(dev, DM_GPR_DATA, 0);
@@ -489,6 +487,8 @@ static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
b3..n: packet data
*/
+ len = skb->len;
+
if (skb_headroom(skb) < DM_TX_OVERHEAD) {
struct sk_buff *skb2;
@@ -501,10 +501,9 @@ static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
__skb_push(skb, DM_TX_OVERHEAD);
- len = skb->len;
/* usbnet adds padding if length is a multiple of packet size
if so, adjust length value in header */
- if ((len % dev->maxpacket) == 0)
+ if ((skb->len % dev->maxpacket) == 0)
len++;
skb->data[0] = len;
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 5b16d9a..a12f576 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -953,11 +953,14 @@ static int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net)
/* don't assume the hardware handles USB_ZERO_PACKET
* NOTE: strictly conforming cdc-ether devices should expect
* the ZLP here, but ignore the one-byte packet.
- *
- * FIXME zero that byte, if it doesn't require a new skb.
*/
- if ((length % dev->maxpacket) == 0)
+ if ((length % dev->maxpacket) == 0) {
urb->transfer_buffer_length++;
+ if (skb_tailroom(skb)) {
+ skb->data[skb->len] = 0;
+ __skb_put(skb, 1);
+ }
+ }
spin_lock_irqsave (&dev->txq.lock, flags);
diff --git a/drivers/net/wireless/libertas/Makefile b/drivers/net/wireless/libertas/Makefile
index a1097f5..32ed413 100644
--- a/drivers/net/wireless/libertas/Makefile
+++ b/drivers/net/wireless/libertas/Makefile
@@ -2,7 +2,7 @@ libertas-objs := main.o fw.o wext.o \
rx.o tx.o cmd.o \
cmdresp.o scan.o \
join.o 11d.o \
- ioctl.o debugfs.o \
+ debugfs.o \
ethtool.o assoc.o
usb8xxx-objs += if_bootcmd.o
diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README
index 1f92f50..0b133ce 100644
--- a/drivers/net/wireless/libertas/README
+++ b/drivers/net/wireless/libertas/README
@@ -28,281 +28,6 @@ DRIVER LOADING
insmod usb8388.ko [fw_name=usb8388.bin]
-=====================
-IWPRIV COMMAND
-=====================
-
-NAME
- This manual describes the usage of private commands used in Marvell WLAN
- Linux Driver. All the commands available in Wlanconfig will not be available
- in the iwpriv.
-
-SYNOPSIS
- iwpriv <ethX> <command> [sub-command] ...
-
- iwpriv ethX setregioncode <n>
- iwpriv ethX getregioncode
-
-Version 5 Command:
- iwpriv ethX ledgpio <n>
-
-BT Commands:
- The blinding table (BT) contains a list of mac addresses that will be,
- by default, ignored by the firmware. It is also possible to invert this
- behavior so that we will ignore all traffic except for the portion
- coming from mac addresess in the list. It is primarily used for
- debugging and testing networks. It can be edited and inspected with
- the following commands:
-
- iwpriv ethX bt_reset
- iwpriv ethX bt_add <mac_address>
- iwpriv ethX bt_del <mac_address>
- iwpriv ethX bt_list <id>
- iwpriv ethX bt_get_invert <n>
- iwpriv ethX bt_set_invert <n>
-
-FWT Commands:
- The forwarding table (FWT) is a feature used to manage mesh network
- routing in the firmware. The FWT is essentially a routing table that
- associates a destination mac address (da) with a next hop receiver
- address (ra). The FWT can be inspected and edited with the following
- iwpriv commands, which are described in greater detail below.
- Eventually, the table will be automatically maintained by a custom
- routing protocol.
-
- NOTE: FWT commands replace the previous DFT commands. What were the DFT
- commands?, you might ask. They were an earlier API to the firmware that
- implemented a simple MAC-layer forwarding mechanism. In the unlikely
- event that you were using these commands, you must migrate to the new
- FWT commands which can be used to achieve the same functionality.
-
- iwpriv ethX fwt_add [parameters]
- iwpriv ethX fwt_del [parameters]
- iwpriv ethX fwt_lookup [parameters]
- iwpriv ethX fwt_list [parameters]
- iwpriv ethX fwt_list_route [parameters]
- iwpriv ethX fwt_list_neigh [parameters]
- iwpriv ethX fwt_reset [parameters]
- iwpriv ethX fwt_cleanup
- iwpriv ethX fwt_time
-
-MESH Commands:
-
- The MESH commands are used to configure various features of the mesh
- routing protocol. The following commands are supported:
-
- iwpriv ethX mesh_get_ttl
- iwpriv ethX mesh_set_ttl ttl
-
-DESCRIPTION
- Those commands are used to send additional commands to the Marvell WLAN
- card via the Linux device driver.
-
- The ethX parameter specifies the network device that is to be used to
- perform this command on. it could be eth0, eth1 etc.
-
-setregioncode
- This command is used to set the region code in the station.
- where value is 'region code' for various regions like
- USA FCC, Canada IC, Spain, France, Europe ETSI, Japan ...
-
- Usage:
- iwpriv ethX setregioncode 0x10: set region code to USA (0x10).
-
-getregioncode
- This command is used to get the region code information set in the
- station.
-
-ledgpio
- This command is used to set/get LEDs.
-
- iwpriv ethX ledgpio <LEDs>
- will set the corresponding LED for the GPIO Line.
-
- iwpriv ethX ledgpio
- will give u which LEDs are Enabled.
-
- Usage:
- iwpriv eth1 ledgpio 1 0 2 1 3 4
- will enable
- LED 1 -> GPIO 0
- LED 2 -> GPIO 1
- LED 3 -> GPIO 4
-
- iwpriv eth1 ledgpio
- shows LED information in the format as mentioned above.
-
- Note: LED0 is invalid
- Note: Maximum Number of LEDs are 16.
-
-fwt_add
- This command is used to insert an entry into the FWT table. The list of
- parameters must follow the following structure:
-
- iwpriv ethX fwt_add da ra [metric dir rate ssn dsn hopcount ttl expiration sleepmode snr]
-
- The parameters between brackets are optional, but they must appear in
- the order specified. For example, if you want to specify the metric,
- you must also specify the dir, ssn, and dsn but you need not specify the
- hopcount, expiration, sleepmode, or snr. Any unspecified parameters
- will be assigned the defaults specified below.
-
- The different parameters are:-
- da -- DA MAC address in the form 00:11:22:33:44:55
- ra -- RA MAC address in the form 00:11:22:33:44:55
- metric -- route metric (cost: smaller-metric routes are
- preferred, default is 0)
- dir -- direction (1 for direct, 0 for reverse,
- default is 1)
- rate -- data rate used for transmission to the RA,
- as specified for the rateadapt command,
- default is 3 (11Mbps)
- ssn -- Source Sequence Number (time at the RA for
- reverse routes. Default is 0)
- dsn -- Destination Sequence Number (time at the DA
- for direct routes. Default is 0)
- hopcount -- hop count (currently unused, default is 0)
- ttl -- TTL (Only used in reverse entries)
- expiration -- entry expiration (in ticks, where a tick is
- 1024us, or ~ 1ms. Use 0 for an indefinite
- entry, default is 0)
- sleepmode -- RA's sleep mode (currently unused, default is
- 0)
- snr -- SNR in the link to RA (currently unused,
- default is 0)
-
- The command does not return anything.
-
-fwt_del
- This command is used to remove an entry to the FWT table. The list of
- parameters must follow the following structure:
-
- iwpriv ethX fwt_del da ra [dir]
-
- where the different parameters are:-
- da -- DA MAC address (in the form "00:11:22:33:44:55")
- ra -- RA MAC address (in the form "00:11:22:33:44:55")
- dir -- direction (1 for direct, 0 for reverse,
- default is 1)
-
- The command does not return anything.
-
-fwt_lookup
- This command is used to get the best route in the FWT table to a given
- host. The only parameter is the MAC address of the host that is being
- looked for.
-
- iwpriv ethX fwt_lookup da
-
- where:-
- da -- DA MAC address (in the form "00:11:22:33:44:55")
-
- The command returns an output string identical to the one returned by
- fwt_list described below.
-
-
-fwt_list
- This command is used to list a route from the FWT table. The only
- parameter is the index into the table. If you want to list all the
- routes in a table, start with index=0, and keep listing until you get a
- "(null)" string. Note that the indicies may change as the fwt is
- updated. It is expected that most users will not use fwt_list directly,
- but that a utility similar to the traditional route command will be used
- to invoke fwt_list over and over.
-
- iwpriv ethX fwt_list index
-
- The output is a string of the following form:
-
- da ra valid metric dir rate ssn dsn hopcount ttl expiration
- sleepmode snr precursor
-
- where the different fields are:-
- da -- DA MAC address (in the form "00:11:22:33:44:55")
- ra -- RA MAC address (in the form "00:11:22:33:44:55")
- valid -- whether the route is valid (0 if not valid)
- metric -- route metric (cost: smaller-metric routes are preferred)
- dir -- direction (1 for direct, 0 for reverse)
- rate -- data rate used for transmission to the RA,
- as specified for the rateadapt command
- ssn -- Source Sequence Number (time at the RA for reverse routes)
- dsn -- Destination Sequence Number (time at the DA for direct routes)
- hopcount -- hop count (currently unused)
- ttl -- TTL (only used in reverse entries)
- expiration -- entry expiration (in ticks, where a tick is 1024us, or ~ 1ms. Use 0 for an indefinite entry)
- sleepmode -- RA's sleep mode (currently unused)
- snr -- SNR in the link to RA (currently unused)
- precursor -- predecessor in direct routes
-
-fwt_list_route
- This command is equivalent to fwt_list.
-
-fwt_list_neigh
- This command is used to list a neighbor from the FWT table. The only
- parameter is the neighbor ID. If you want to list all the neighbors in a
- table, start with nid=0, and keep incrementing nid until you get a
- "(null)" string. Note that the nid from a fwt_list_route command can be
- used as an input to this command. Also note that this command is meant
- mostly for debugging. It is expected that users will use fwt_lookup.
- One important reason for this is that the neighbor id may change as the
- neighbor table is altered.
-
- iwpriv ethX fwt_list_neigh nid
-
- The output is a string of the following form:
-
- ra sleepmode snr references
-
- where the different fields are:-
- ra -- RA MAC address (in the form "00:11:22:33:44:55")
- sleepmode -- RA's sleep mode (currently unused)
- snr -- SNR in the link to RA (currently unused)
- references -- RA's reference counter
-
-fwt_reset
- This command is used to reset the FWT table, getting rid of all the
- entries. There are no input parameters.
-
- iwpriv ethX fwt_reset
-
- The command does not return anything.
-
-fwt_cleanup
- This command is used to perform user-based garbage recollection. The
- FWT table is checked, and all the entries that are expired or invalid
- are cleaned. Note that this is exported to the driver for debugging
- purposes, as garbage collection is also fired by the firmware when in
- space problems. There are no input parameters.
-
- iwpriv ethX fwt_cleanup
-
- The command does returns the number of invalid/expired routes deleted.
-
-fwt_time
- This command returns a card's internal time representation. It is this
- time that is used to represent the expiration times of FWT entries. The
- number is not consistent from card to card; it is simply a timer count.
- The fwt_time command is used to inspect the timer so that expiration
- times reported by fwt_list can be properly interpreted.
-
- iwpriv ethX fwt_time
-
-mesh_get_ttl
-
- The mesh ttl is the number of hops a mesh packet can traverse before it
- is dropped. This parameter is used to prevent infinite loops in the
- mesh network. The value returned by this function is the ttl assigned
- to all mesh packets. Currently there is no way to control the ttl on a
- per packet or per socket basis.
-
- iwpriv ethX mesh_get_ttl
-
-mesh_set_ttl ttl
-
- Set the ttl. The argument must be between 0 and 255.
-
- iwpriv ethX mesh_set_ttl <ttl>
-
=========================
ETHTOOL
=========================
diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index f67efa0..afd5617 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -323,6 +323,8 @@ static int assoc_helper_secinfo(wlan_private *priv,
{
wlan_adapter *adapter = priv->adapter;
int ret = 0;
+ u32 do_wpa;
+ u32 rsn = 0;
lbs_deb_enter(LBS_DEB_ASSOC);
@@ -333,12 +335,34 @@ static int assoc_helper_secinfo(wlan_private *priv,
if (ret)
goto out;
- /* enable/disable RSN */
+ /* If RSN is already enabled, don't try to enable it again, since
+ * ENABLE_RSN resets internal state machines and will clobber the
+ * 4-way WPA handshake.
+ */
+
+ /* Get RSN enabled/disabled */
ret = libertas_prepare_and_send_command(priv,
cmd_802_11_enable_rsn,
cmd_act_set,
cmd_option_waitforrsp,
- 0, assoc_req);
+ 0, &rsn);
+ if (ret) {
+ lbs_deb_assoc("Failed to get RSN status: %d", ret);
+ goto out;
+ }
+
+ /* Don't re-enable RSN if it's already enabled */
+ do_wpa = (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled);
+ if (do_wpa == rsn)
+ goto out;
+
+ /* Set RSN enabled/disabled */
+ rsn = do_wpa;
+ ret = libertas_prepare_and_send_command(priv,
+ cmd_802_11_enable_rsn,
+ cmd_act_set,
+ cmd_option_waitforrsp,
+ 0, &rsn);
out:
lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 124e029..13f6528 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -228,17 +228,19 @@ static int wlan_cmd_802_11_enable_rsn(wlan_private * priv,
void * pdata_buf)
{
struct cmd_ds_802_11_enable_rsn *penableRSN = &cmd->params.enbrsn;
- struct assoc_request * assoc_req = pdata_buf;
+ u32 * enable = pdata_buf;
lbs_deb_enter(LBS_DEB_CMD);
cmd->command = cpu_to_le16(cmd_802_11_enable_rsn);
cmd->size = cpu_to_le16(sizeof(*penableRSN) + S_DS_GEN);
penableRSN->action = cpu_to_le16(cmd_action);
- if (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled) {
- penableRSN->enable = cpu_to_le16(cmd_enable_rsn);
- } else {
- penableRSN->enable = cpu_to_le16(cmd_disable_rsn);
+
+ if (cmd_action == cmd_act_set) {
+ if (*enable)
+ penableRSN->enable = cpu_to_le16(cmd_enable_rsn);
+ else
+ penableRSN->enable = cpu_to_le16(cmd_enable_rsn);
}
lbs_deb_leave(LBS_DEB_CMD);
diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
index 0c3b9a5..6ac0d47 100644
--- a/drivers/net/wireless/libertas/cmdresp.c
+++ b/drivers/net/wireless/libertas/cmdresp.c
@@ -537,6 +537,24 @@ static int wlan_ret_get_log(wlan_private * priv,
return 0;
}
+static int libertas_ret_802_11_enable_rsn(wlan_private * priv,
+ struct cmd_ds_command *resp)
+{
+ struct cmd_ds_802_11_enable_rsn *enable_rsn = &resp->params.enbrsn;
+ wlan_adapter *adapter = priv->adapter;
+ u32 * pdata_buf = adapter->cur_cmd->pdata_buf;
+
+ lbs_deb_enter(LBS_DEB_CMD);
+
+ if (enable_rsn->action == cpu_to_le16(cmd_act_get)) {
+ if (pdata_buf)
+ *pdata_buf = (u32) le16_to_cpu(enable_rsn->enable);
+ }
+
+ lbs_deb_enter(LBS_DEB_CMD);
+ return 0;
+}
+
static inline int handle_cmd_response(u16 respcmd,
struct cmd_ds_command *resp,
wlan_private *priv)
@@ -610,7 +628,10 @@ static inline int handle_cmd_response(u16 respcmd,
case cmd_ret_802_11_authenticate:
case cmd_ret_802_11_radio_control:
case cmd_ret_802_11_beacon_stop:
+ break;
+
case cmd_ret_802_11_enable_rsn:
+ ret = libertas_ret_802_11_enable_rsn(priv, resp);
break;
case cmd_ret_802_11_data_rate:
diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h
index 3acf939..09b898f 100644
--- a/drivers/net/wireless/libertas/hostcmd.h
+++ b/drivers/net/wireless/libertas/hostcmd.h
@@ -503,7 +503,7 @@ struct cmd_ds_802_11_ad_hoc_join {
struct cmd_ds_802_11_enable_rsn {
__le16 action;
__le16 enable;
-};
+} __attribute__ ((packed));
struct MrvlIEtype_keyParamSet {
/* type ID */
diff --git a/drivers/net/wireless/libertas/ioctl.c b/drivers/net/wireless/libertas/ioctl.c
deleted file mode 100644
index f410815..0000000
--- a/drivers/net/wireless/libertas/ioctl.c
+++ /dev/null
@@ -1,1081 +0,0 @@
-/**
- * This file contains ioctl functions
- */
-
-#include <linux/ctype.h>
-#include <linux/delay.h>
-#include <linux/if.h>
-#include <linux/if_arp.h>
-#include <linux/wireless.h>
-
-#include <net/iw_handler.h>
-#include <net/ieee80211.h>
-
-#include "host.h"
-#include "radiotap.h"
-#include "decl.h"
-#include "defs.h"
-#include "dev.h"
-#include "join.h"
-#include "wext.h"
-
-#define MAX_SCAN_CELL_SIZE (IW_EV_ADDR_LEN + \
- IW_ESSID_MAX_SIZE + \
- IW_EV_UINT_LEN + IW_EV_FREQ_LEN + \
- IW_EV_QUAL_LEN + IW_ESSID_MAX_SIZE + \
- IW_EV_PARAM_LEN + 40) /* 40 for WPAIE */
-
-#define WAIT_FOR_SCAN_RRESULT_MAX_TIME (10 * HZ)
-
-static int wlan_set_region(wlan_private * priv, u16 region_code)
-{
- int i;
- int ret = 0;
-
- for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) {
- // use the region code to search for the index
- if (region_code == libertas_region_code_to_index[i]) {
- priv->adapter->regiontableindex = (u16) i;
- priv->adapter->regioncode = region_code;
- break;
- }
- }
-
- // if it's unidentified region code
- if (i >= MRVDRV_MAX_REGION_CODE) {
- lbs_deb_ioctl("region Code not identified\n");
- ret = -1;
- goto done;
- }
-
- if (libertas_set_regiontable(priv, priv->adapter->regioncode, 0)) {
- ret = -EINVAL;
- }
-
-done:
- lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret);
- return ret;
-}
-
-static inline int hex2int(char c)
-{
- if (c >= '0' && c <= '9')
- return (c - '0');
- if (c >= 'a' && c <= 'f')
- return (c - 'a' + 10);
- if (c >= 'A' && c <= 'F')
- return (c - 'A' + 10);
- return -1;
-}
-
-/* Convert a string representation of a MAC address ("xx:xx:xx:xx:xx:xx")
- into binary format (6 bytes).
-
- This function expects that each byte is represented with 2 characters
- (e.g., 11:2:11:11:11:11 is invalid)
-
- */
-static char *eth_str2addr(char *ethstr, u8 * addr)
-{
- int i, val, val2;
- char *pos = ethstr;
-
- /* get rid of initial blanks */
- while (*pos == ' ' || *pos == '\t')
- ++pos;
-
- for (i = 0; i < 6; i++) {
- val = hex2int(*pos++);
- if (val < 0)
- return NULL;
- val2 = hex2int(*pos++);
- if (val2 < 0)
- return NULL;
- addr[i] = (val * 16 + val2) & 0xff;
-
- if (i < 5 && *pos++ != ':')
- return NULL;
- }
- return pos;
-}
-
-/* this writes xx:xx:xx:xx:xx:xx into ethstr
- (ethstr must have space for 18 chars) */
-static int eth_addr2str(u8 * addr, char *ethstr)
-{
- int i;
- char *pos = ethstr;
-
- for (i = 0; i < 6; i++) {
- sprintf(pos, "%02x", addr[i] & 0xff);
- pos += 2;
- if (i < 5)
- *pos++ = ':';
- }
- return 17;
-}
-
-/**
- * @brief Add an entry to the BT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_bt_add_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char ethaddrs_str[18];
- char *pos;
- u8 ethaddr[ETH_ALEN];
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(ethaddrs_str, wrq->u.data.pointer,
- sizeof(ethaddrs_str)))
- return -EFAULT;
-
- if ((pos = eth_str2addr(ethaddrs_str, ethaddr)) == NULL) {
- lbs_pr_info("BT_ADD: Invalid MAC address\n");
- return -EINVAL;
- }
-
- lbs_deb_ioctl("BT: adding %s\n", ethaddrs_str);
- ret = libertas_prepare_and_send_command(priv, cmd_bt_access,
- cmd_act_bt_access_add,
- cmd_option_waitforrsp, 0, ethaddr);
- lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret);
- return ret;
-}
-
-/**
- * @brief Delete an entry from the BT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_bt_del_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char ethaddrs_str[18];
- u8 ethaddr[ETH_ALEN];
- char *pos;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(ethaddrs_str, wrq->u.data.pointer,
- sizeof(ethaddrs_str)))
- return -EFAULT;
-
- if ((pos = eth_str2addr(ethaddrs_str, ethaddr)) == NULL) {
- lbs_pr_info("Invalid MAC address\n");
- return -EINVAL;
- }
-
- lbs_deb_ioctl("BT: deleting %s\n", ethaddrs_str);
-
- return (libertas_prepare_and_send_command(priv,
- cmd_bt_access,
- cmd_act_bt_access_del,
- cmd_option_waitforrsp, 0, ethaddr));
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Reset all entries from the BT table
- * @param priv A pointer to wlan_private structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_bt_reset_ioctl(wlan_private * priv)
-{
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- lbs_pr_alert( "BT: resetting\n");
-
- return (libertas_prepare_and_send_command(priv,
- cmd_bt_access,
- cmd_act_bt_access_reset,
- cmd_option_waitforrsp, 0, NULL));
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief List an entry from the BT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_bt_list_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int pos;
- char *addr1;
- struct iwreq *wrq = (struct iwreq *)req;
- /* used to pass id and store the bt entry returned by the FW */
- union {
- u32 id;
- char addr1addr2[2 * ETH_ALEN];
- } param;
- static char outstr[64];
- char *pbuf = outstr;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(outstr, wrq->u.data.pointer, sizeof(outstr))) {
- lbs_deb_ioctl("Copy from user failed\n");
- return -1;
- }
- param.id = simple_strtoul(outstr, NULL, 10);
- pos = sprintf(pbuf, "%d: ", param.id);
- pbuf += pos;
-
- ret = libertas_prepare_and_send_command(priv, cmd_bt_access,
- cmd_act_bt_access_list,
- cmd_option_waitforrsp, 0,
- (char *)¶m);
-
- if (ret == 0) {
- addr1 = param.addr1addr2;
-
- pos = sprintf(pbuf, "BT includes node ");
- pbuf += pos;
- pos = eth_addr2str(addr1, pbuf);
- pbuf += pos;
- } else {
- sprintf(pbuf, "(null)");
- pbuf += pos;
- }
-
- wrq->u.data.length = strlen(outstr);
- if (copy_to_user(wrq->u.data.pointer, (char *)outstr,
- wrq->u.data.length)) {
- lbs_deb_ioctl("BT_LIST: Copy to user failed!\n");
- return -EFAULT;
- }
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0 ;
-}
-
-/**
- * @brief Sets inverted state of blacklist (non-zero if inverted)
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_bt_set_invert_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int ret;
- struct iwreq *wrq = (struct iwreq *)req;
- union {
- u32 id;
- char addr1addr2[2 * ETH_ALEN];
- } param;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- param.id = SUBCMD_DATA(wrq) ;
- ret = libertas_prepare_and_send_command(priv, cmd_bt_access,
- cmd_act_bt_access_set_invert,
- cmd_option_waitforrsp, 0,
- (char *)¶m);
- if (ret != 0)
- return -EFAULT;
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Gets inverted state of blacklist (non-zero if inverted)
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_bt_get_invert_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- int ret;
- union {
- u32 id;
- char addr1addr2[2 * ETH_ALEN];
- } param;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- ret = libertas_prepare_and_send_command(priv, cmd_bt_access,
- cmd_act_bt_access_get_invert,
- cmd_option_waitforrsp, 0,
- (char *)¶m);
-
- if (ret == 0)
- wrq->u.param.value = le32_to_cpu(param.id);
- else
- return -EFAULT;
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Find the next parameter in an input string
- * @param ptr A pointer to the input parameter string
- * @return A pointer to the next parameter, or 0 if no parameters left.
- */
-static char * next_param(char * ptr)
-{
- if (!ptr) return NULL;
- while (*ptr == ' ' || *ptr == '\t') ++ptr;
- return (*ptr == '\0') ? NULL : ptr;
-}
-
-/**
- * @brief Add an entry to the FWT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_add_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char in_str[128];
- static struct cmd_ds_fwt_access fwt_access;
- char *ptr;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str)))
- return -EFAULT;
-
- if ((ptr = eth_str2addr(in_str, fwt_access.da)) == NULL) {
- lbs_pr_alert( "FWT_ADD: Invalid MAC address 1\n");
- return -EINVAL;
- }
-
- if ((ptr = eth_str2addr(ptr, fwt_access.ra)) == NULL) {
- lbs_pr_alert( "FWT_ADD: Invalid MAC address 2\n");
- return -EINVAL;
- }
-
- if ((ptr = next_param(ptr)))
- fwt_access.metric =
- cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
- else
- fwt_access.metric = cpu_to_le32(FWT_DEFAULT_METRIC);
-
- if ((ptr = next_param(ptr)))
- fwt_access.dir = (u8)simple_strtoul(ptr, &ptr, 10);
- else
- fwt_access.dir = FWT_DEFAULT_DIR;
-
- if ((ptr = next_param(ptr)))
- fwt_access.rate = (u8) simple_strtoul(ptr, &ptr, 10);
- else
- fwt_access.rate = FWT_DEFAULT_RATE;
-
- if ((ptr = next_param(ptr)))
- fwt_access.ssn =
- cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
- else
- fwt_access.ssn = cpu_to_le32(FWT_DEFAULT_SSN);
-
- if ((ptr = next_param(ptr)))
- fwt_access.dsn =
- cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
- else
- fwt_access.dsn = cpu_to_le32(FWT_DEFAULT_DSN);
-
- if ((ptr = next_param(ptr)))
- fwt_access.hopcount = simple_strtoul(ptr, &ptr, 10);
- else
- fwt_access.hopcount = FWT_DEFAULT_HOPCOUNT;
-
- if ((ptr = next_param(ptr)))
- fwt_access.ttl = simple_strtoul(ptr, &ptr, 10);
- else
- fwt_access.ttl = FWT_DEFAULT_TTL;
-
- if ((ptr = next_param(ptr)))
- fwt_access.expiration =
- cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
- else
- fwt_access.expiration = cpu_to_le32(FWT_DEFAULT_EXPIRATION);
-
- if ((ptr = next_param(ptr)))
- fwt_access.sleepmode = (u8)simple_strtoul(ptr, &ptr, 10);
- else
- fwt_access.sleepmode = FWT_DEFAULT_SLEEPMODE;
-
- if ((ptr = next_param(ptr)))
- fwt_access.snr =
- cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
- else
- fwt_access.snr = cpu_to_le32(FWT_DEFAULT_SNR);
-
-#ifdef DEBUG
- {
- char ethaddr1_str[18], ethaddr2_str[18];
- eth_addr2str(fwt_access.da, ethaddr1_str);
- eth_addr2str(fwt_access.ra, ethaddr2_str);
- lbs_deb_ioctl("FWT_ADD: adding (da:%s,%i,ra:%s)\n", ethaddr1_str,
- fwt_access.dir, ethaddr2_str);
- lbs_deb_ioctl("FWT_ADD: ssn:%u dsn:%u met:%u hop:%u ttl:%u exp:%u slp:%u snr:%u\n",
- fwt_access.ssn, fwt_access.dsn, fwt_access.metric,
- fwt_access.hopcount, fwt_access.ttl, fwt_access.expiration,
- fwt_access.sleepmode, fwt_access.snr);
- }
-#endif
-
- ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
- cmd_act_fwt_access_add,
- cmd_option_waitforrsp, 0,
- (void *)&fwt_access);
-
- lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret);
- return ret;
-}
-
-/**
- * @brief Delete an entry from the FWT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_del_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char in_str[64];
- static struct cmd_ds_fwt_access fwt_access;
- char *ptr;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str)))
- return -EFAULT;
-
- if ((ptr = eth_str2addr(in_str, fwt_access.da)) == NULL) {
- lbs_pr_alert( "FWT_DEL: Invalid MAC address 1\n");
- return -EINVAL;
- }
-
- if ((ptr = eth_str2addr(ptr, fwt_access.ra)) == NULL) {
- lbs_pr_alert( "FWT_DEL: Invalid MAC address 2\n");
- return -EINVAL;
- }
-
- if ((ptr = next_param(ptr)))
- fwt_access.dir = (u8)simple_strtoul(ptr, &ptr, 10);
- else
- fwt_access.dir = FWT_DEFAULT_DIR;
-
-#ifdef DEBUG
- {
- char ethaddr1_str[18], ethaddr2_str[18];
- lbs_deb_ioctl("FWT_DEL: line is %s\n", in_str);
- eth_addr2str(fwt_access.da, ethaddr1_str);
- eth_addr2str(fwt_access.ra, ethaddr2_str);
- lbs_deb_ioctl("FWT_DEL: removing (da:%s,ra:%s,dir:%d)\n", ethaddr1_str,
- ethaddr2_str, fwt_access.dir);
- }
-#endif
-
- ret = libertas_prepare_and_send_command(priv,
- cmd_fwt_access,
- cmd_act_fwt_access_del,
- cmd_option_waitforrsp, 0,
- (void *)&fwt_access);
- lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret);
- return ret;
-}
-
-
-/**
- * @brief Print route parameters
- * @param fwt_access struct cmd_ds_fwt_access with route info
- * @param buf destination buffer for route info
- */
-static void print_route(struct cmd_ds_fwt_access fwt_access, char *buf)
-{
- buf += sprintf(buf, " ");
- buf += eth_addr2str(fwt_access.da, buf);
- buf += sprintf(buf, " ");
- buf += eth_addr2str(fwt_access.ra, buf);
- buf += sprintf(buf, " %u", fwt_access.valid);
- buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.metric));
- buf += sprintf(buf, " %u", fwt_access.dir);
- buf += sprintf(buf, " %u", fwt_access.rate);
- buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.ssn));
- buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.dsn));
- buf += sprintf(buf, " %u", fwt_access.hopcount);
- buf += sprintf(buf, " %u", fwt_access.ttl);
- buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.expiration));
- buf += sprintf(buf, " %u", fwt_access.sleepmode);
- buf += sprintf(buf, " %u ", le32_to_cpu(fwt_access.snr));
- buf += eth_addr2str(fwt_access.prec, buf);
-}
-
-/**
- * @brief Lookup an entry in the FWT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_lookup_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char in_str[64];
- char *ptr;
- static struct cmd_ds_fwt_access fwt_access;
- static char out_str[128];
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str)))
- return -EFAULT;
-
- if ((ptr = eth_str2addr(in_str, fwt_access.da)) == NULL) {
- lbs_pr_alert( "FWT_LOOKUP: Invalid MAC address\n");
- return -EINVAL;
- }
-
-#ifdef DEBUG
- {
- char ethaddr1_str[18];
- lbs_deb_ioctl("FWT_LOOKUP: line is %s\n", in_str);
- eth_addr2str(fwt_access.da, ethaddr1_str);
- lbs_deb_ioctl("FWT_LOOKUP: looking for (da:%s)\n", ethaddr1_str);
- }
-#endif
-
- ret = libertas_prepare_and_send_command(priv,
- cmd_fwt_access,
- cmd_act_fwt_access_lookup,
- cmd_option_waitforrsp, 0,
- (void *)&fwt_access);
-
- if (ret == 0)
- print_route(fwt_access, out_str);
- else
- sprintf(out_str, "(null)");
-
- wrq->u.data.length = strlen(out_str);
- if (copy_to_user(wrq->u.data.pointer, (char *)out_str,
- wrq->u.data.length)) {
- lbs_deb_ioctl("FWT_LOOKUP: Copy to user failed!\n");
- return -EFAULT;
- }
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Reset all entries from the FWT table
- * @param priv A pointer to wlan_private structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_reset_ioctl(wlan_private * priv)
-{
- lbs_deb_ioctl("FWT: resetting\n");
-
- return (libertas_prepare_and_send_command(priv,
- cmd_fwt_access,
- cmd_act_fwt_access_reset,
- cmd_option_waitforrsp, 0, NULL));
-}
-
-/**
- * @brief List an entry from the FWT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_list_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char in_str[8];
- static struct cmd_ds_fwt_access fwt_access;
- char *ptr = in_str;
- static char out_str[128];
- char *pbuf = out_str;
- int ret = 0;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str))) {
- ret = -EFAULT;
- goto out;
- }
-
- fwt_access.id = cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
-
-#ifdef DEBUG
- {
- lbs_deb_ioctl("FWT_LIST: line is %s\n", in_str);
- lbs_deb_ioctl("FWT_LIST: listing id:%i\n", le32_to_cpu(fwt_access.id));
- }
-#endif
-
- ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
- cmd_act_fwt_access_list,
- cmd_option_waitforrsp, 0, (void *)&fwt_access);
-
- if (ret == 0)
- print_route(fwt_access, pbuf);
- else
- pbuf += sprintf(pbuf, " (null)");
-
- wrq->u.data.length = strlen(out_str);
- if (copy_to_user(wrq->u.data.pointer, (char *)out_str,
- wrq->u.data.length)) {
- lbs_deb_ioctl("FWT_LIST: Copy to user failed!\n");
- ret = -EFAULT;
- goto out;
- }
-
- ret = 0;
-
-out:
- lbs_deb_leave(LBS_DEB_IOCTL);
- return ret;
-}
-
-/**
- * @brief List an entry from the FRT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_list_route_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char in_str[64];
- static struct cmd_ds_fwt_access fwt_access;
- char *ptr = in_str;
- static char out_str[128];
- char *pbuf = out_str;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str)))
- return -EFAULT;
-
- fwt_access.id = cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
-
-#ifdef DEBUG
- {
- lbs_deb_ioctl("FWT_LIST_ROUTE: line is %s\n", in_str);
- lbs_deb_ioctl("FWT_LIST_ROUTE: listing id:%i\n", le32_to_cpu(fwt_access.id));
- }
-#endif
-
- ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
- cmd_act_fwt_access_list_route,
- cmd_option_waitforrsp, 0, (void *)&fwt_access);
-
- if (ret == 0) {
- print_route(fwt_access, pbuf);
- } else
- pbuf += sprintf(pbuf, " (null)");
-
- wrq->u.data.length = strlen(out_str);
- if (copy_to_user(wrq->u.data.pointer, (char *)out_str,
- wrq->u.data.length)) {
- lbs_deb_ioctl("FWT_LIST_ROUTE: Copy to user failed!\n");
- return -EFAULT;
- }
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief List an entry from the FNT table
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_list_neighbor_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- char in_str[8];
- static struct cmd_ds_fwt_access fwt_access;
- char *ptr = in_str;
- static char out_str[128];
- char *pbuf = out_str;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str)))
- return -EFAULT;
-
- memset(&fwt_access, 0, sizeof(fwt_access));
- fwt_access.id = cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
-
-#ifdef DEBUG
- {
- lbs_deb_ioctl("FWT_LIST_NEIGHBOR: line is %s\n", in_str);
- lbs_deb_ioctl("FWT_LIST_NEIGHBOR: listing id:%i\n", le32_to_cpu(fwt_access.id));
- }
-#endif
-
- ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
- cmd_act_fwt_access_list_neighbor,
- cmd_option_waitforrsp, 0,
- (void *)&fwt_access);
-
- if (ret == 0) {
- pbuf += sprintf(pbuf, " ra ");
- pbuf += eth_addr2str(fwt_access.ra, pbuf);
- pbuf += sprintf(pbuf, " slp %u", fwt_access.sleepmode);
- pbuf += sprintf(pbuf, " snr %u", le32_to_cpu(fwt_access.snr));
- pbuf += sprintf(pbuf, " ref %u", le32_to_cpu(fwt_access.references));
- } else
- pbuf += sprintf(pbuf, " (null)");
-
- wrq->u.data.length = strlen(out_str);
- if (copy_to_user(wrq->u.data.pointer, (char *)out_str,
- wrq->u.data.length)) {
- lbs_deb_ioctl("FWT_LIST_NEIGHBOR: Copy to user failed!\n");
- return -EFAULT;
- }
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Cleans up the route (FRT) and neighbor (FNT) tables
- * (Garbage Collection)
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_cleanup_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- static struct cmd_ds_fwt_access fwt_access;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- lbs_deb_ioctl("FWT: cleaning up\n");
-
- memset(&fwt_access, 0, sizeof(fwt_access));
-
- ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
- cmd_act_fwt_access_cleanup,
- cmd_option_waitforrsp, 0,
- (void *)&fwt_access);
-
- if (ret == 0)
- wrq->u.param.value = le32_to_cpu(fwt_access.references);
- else
- return -EFAULT;
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Gets firmware internal time (debug purposes)
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_fwt_time_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- static struct cmd_ds_fwt_access fwt_access;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- lbs_deb_ioctl("FWT: getting time\n");
-
- memset(&fwt_access, 0, sizeof(fwt_access));
-
- ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
- cmd_act_fwt_access_time,
- cmd_option_waitforrsp, 0,
- (void *)&fwt_access);
-
- if (ret == 0)
- wrq->u.param.value = le32_to_cpu(fwt_access.references);
- else
- return -EFAULT;
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Gets mesh ttl from firmware
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_mesh_get_ttl_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- struct cmd_ds_mesh_access mesh_access;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- memset(&mesh_access, 0, sizeof(mesh_access));
-
- ret = libertas_prepare_and_send_command(priv, cmd_mesh_access,
- cmd_act_mesh_get_ttl,
- cmd_option_waitforrsp, 0,
- (void *)&mesh_access);
-
- if (ret == 0)
- wrq->u.param.value = le32_to_cpu(mesh_access.data[0]);
- else
- return -EFAULT;
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return 0;
-}
-
-/**
- * @brief Gets mesh ttl from firmware
- * @param priv A pointer to wlan_private structure
- * @param ttl New ttl value
- * @return 0 --success, otherwise fail
- */
-static int wlan_mesh_set_ttl_ioctl(wlan_private * priv, int ttl)
-{
- struct cmd_ds_mesh_access mesh_access;
- int ret;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- if( (ttl > 0xff) || (ttl < 0) )
- return -EINVAL;
-
- memset(&mesh_access, 0, sizeof(mesh_access));
- mesh_access.data[0] = cpu_to_le32(ttl);
-
- ret = libertas_prepare_and_send_command(priv, cmd_mesh_access,
- cmd_act_mesh_set_ttl,
- cmd_option_waitforrsp, 0,
- (void *)&mesh_access);
-
- if (ret != 0)
- ret = -EFAULT;
-
- lbs_deb_leave(LBS_DEB_IOCTL);
- return ret;
-}
-
-/**
- * @brief ioctl function - entry point
- *
- * @param dev A pointer to net_device structure
- * @param req A pointer to ifreq structure
- * @param cmd command
- * @return 0--success, otherwise fail
- */
-int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
-{
- int subcmd = 0;
- int idata = 0;
- int *pdata;
- int ret = 0;
- wlan_private *priv = dev->priv;
- wlan_adapter *adapter = priv->adapter;
- struct iwreq *wrq = (struct iwreq *)req;
-
- lbs_deb_enter(LBS_DEB_IOCTL);
-
- lbs_deb_ioctl("libertas_do_ioctl: ioctl cmd = 0x%x\n", cmd);
- switch (cmd) {
- case WLAN_SETNONE_GETNONE: /* set WPA mode on/off ioctl #20 */
- switch (wrq->u.data.flags) {
- case WLAN_SUBCMD_BT_RESET: /* bt_reset */
- wlan_bt_reset_ioctl(priv);
- break;
- case WLAN_SUBCMD_FWT_RESET: /* fwt_reset */
- wlan_fwt_reset_ioctl(priv);
- break;
- } /* End of switch */
- break;
-
- case WLAN_SETONEINT_GETNONE:
- /* The first 4 bytes of req->ifr_data is sub-ioctl number
- * after 4 bytes sits the payload.
- */
- subcmd = wrq->u.data.flags;
- if (!subcmd)
- subcmd = (int)wrq->u.param.value;
-
- switch (subcmd) {
- case WLANSETREGION:
- idata = SUBCMD_DATA(wrq);
- ret = wlan_set_region(priv, (u16) idata);
- break;
- case WLAN_SUBCMD_MESH_SET_TTL:
- idata = SUBCMD_DATA(wrq);
- ret = wlan_mesh_set_ttl_ioctl(priv, idata);
- break;
-
- case WLAN_SUBCMD_BT_SET_INVERT:
- ret = wlan_bt_set_invert_ioctl(priv, req);
- break ;
-
- default:
- ret = -EOPNOTSUPP;
- break;
- }
-
- break;
-
- case WLAN_SET128CHAR_GET128CHAR:
- switch ((int)wrq->u.data.flags) {
- case WLAN_SUBCMD_BT_ADD:
- ret = wlan_bt_add_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_BT_DEL:
- ret = wlan_bt_del_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_BT_LIST:
- ret = wlan_bt_list_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_FWT_ADD:
- ret = wlan_fwt_add_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_FWT_DEL:
- ret = wlan_fwt_del_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_FWT_LOOKUP:
- ret = wlan_fwt_lookup_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_FWT_LIST_NEIGHBOR:
- ret = wlan_fwt_list_neighbor_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_FWT_LIST:
- ret = wlan_fwt_list_ioctl(priv, req);
- break;
- case WLAN_SUBCMD_FWT_LIST_ROUTE:
- ret = wlan_fwt_list_route_ioctl(priv, req);
- break;
- }
- break;
-
- case WLAN_SETNONE_GETONEINT:
- switch (wrq->u.param.value) {
- case WLANGETREGION:
- pdata = (int *)wrq->u.name;
- *pdata = (int)adapter->regioncode;
- break;
- case WLAN_SUBCMD_FWT_CLEANUP: /* fwt_cleanup */
- ret = wlan_fwt_cleanup_ioctl(priv, req);
- break;
-
- case WLAN_SUBCMD_FWT_TIME: /* fwt_time */
- ret = wlan_fwt_time_ioctl(priv, req);
- break;
-
- case WLAN_SUBCMD_MESH_GET_TTL:
- ret = wlan_mesh_get_ttl_ioctl(priv, req);
- break;
-
- case WLAN_SUBCMD_BT_GET_INVERT:
- ret = wlan_bt_get_invert_ioctl(priv, req);
- break ;
-
- default:
- ret = -EOPNOTSUPP;
-
- }
-
- break;
-
- case WLAN_SET_GET_SIXTEEN_INT:
- switch ((int)wrq->u.data.flags) {
- case WLAN_LED_GPIO_CTRL:
- {
- int i;
- int data[16];
-
- struct cmd_ds_802_11_led_ctrl ctrl;
- struct mrvlietypes_ledgpio *gpio =
- (struct mrvlietypes_ledgpio *) ctrl.data;
-
- memset(&ctrl, 0, sizeof(ctrl));
- if (wrq->u.data.length > MAX_LEDS * 2)
- return -ENOTSUPP;
- if ((wrq->u.data.length % 2) != 0)
- return -ENOTSUPP;
- if (wrq->u.data.length == 0) {
- ctrl.action =
- cpu_to_le16
- (cmd_act_get);
- } else {
- if (copy_from_user
- (data, wrq->u.data.pointer,
- sizeof(int) *
- wrq->u.data.length)) {
- lbs_deb_ioctl(
- "Copy from user failed\n");
- return -EFAULT;
- }
-
- ctrl.action =
- cpu_to_le16
- (cmd_act_set);
- ctrl.numled = cpu_to_le16(0);
- gpio->header.type =
- cpu_to_le16(TLV_TYPE_LED_GPIO);
- gpio->header.len = wrq->u.data.length;
- for (i = 0; i < wrq->u.data.length;
- i += 2) {
- gpio->ledpin[i / 2].led =
- data[i];
- gpio->ledpin[i / 2].pin =
- data[i + 1];
- }
- }
- ret =
- libertas_prepare_and_send_command(priv,
- cmd_802_11_led_gpio_ctrl,
- 0,
- cmd_option_waitforrsp,
- 0, (void *)&ctrl);
- for (i = 0; i < gpio->header.len; i += 2) {
- data[i] = gpio->ledpin[i / 2].led;
- data[i + 1] = gpio->ledpin[i / 2].pin;
- }
- if (copy_to_user(wrq->u.data.pointer, data,
- sizeof(int) *
- gpio->header.len)) {
- lbs_deb_ioctl("Copy to user failed\n");
- return -EFAULT;
- }
-
- wrq->u.data.length = gpio->header.len;
- }
- break;
- }
- break;
-
- default:
- ret = -EINVAL;
- break;
- }
-
- lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret);
- return ret;
-}
-
-
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 623ab4b..4a59306 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -181,7 +181,8 @@ u16 libertas_region_code_to_index[MRVDRV_MAX_REGION_CODE] =
* @brief Get function for sysfs attribute anycast_mask
*/
static ssize_t libertas_anycast_get(struct device * dev,
- struct device_attribute *attr, char * buf) {
+ struct device_attribute *attr, char * buf)
+{
struct cmd_ds_mesh_access mesh_access;
memset(&mesh_access, 0, sizeof(mesh_access));
@@ -197,7 +198,8 @@ static ssize_t libertas_anycast_get(struct device * dev,
* @brief Set function for sysfs attribute anycast_mask
*/
static ssize_t libertas_anycast_set(struct device * dev,
- struct device_attribute *attr, const char * buf, size_t count) {
+ struct device_attribute *attr, const char * buf, size_t count)
+{
struct cmd_ds_mesh_access mesh_access;
uint32_t datum;
@@ -799,7 +801,6 @@ wlan_private *libertas_add_card(void *card, struct device *dmdev)
dev->open = wlan_open;
dev->hard_start_xmit = wlan_pre_start_xmit;
dev->stop = wlan_close;
- dev->do_ioctl = libertas_do_ioctl;
dev->set_mac_address = wlan_set_mac_address;
dev->tx_timeout = wlan_tx_timeout;
dev->get_stats = wlan_get_stats;
@@ -918,7 +919,6 @@ int libertas_add_mesh(wlan_private *priv, struct device *dev)
mesh_dev->open = mesh_open;
mesh_dev->hard_start_xmit = mesh_pre_start_xmit;
mesh_dev->stop = mesh_close;
- mesh_dev->do_ioctl = libertas_do_ioctl;
mesh_dev->get_stats = wlan_get_stats;
mesh_dev->set_mac_address = wlan_set_mac_address;
mesh_dev->ethtool_ops = &libertas_ethtool_ops;
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index 606af50..c3043dc 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -215,38 +215,6 @@ done:
}
/**
- * @brief Post process the scan table after a new scan command has completed
- *
- * Inspect each entry of the scan table and try to find an entry that
- * matches our current associated/joined network from the scan. If
- * one is found, update the stored copy of the bssdescriptor for our
- * current network.
- *
- * Debug dump the current scan table contents if compiled accordingly.
- *
- * @param priv A pointer to wlan_private structure
- *
- * @return void
- */
-static void wlan_scan_process_results(wlan_private * priv)
-{
- wlan_adapter *adapter = priv->adapter;
- struct bss_descriptor * iter_bss;
- int i = 0;
-
- if (adapter->connect_status == libertas_connected)
- return;
-
- mutex_lock(&adapter->lock);
- list_for_each_entry (iter_bss, &adapter->network_list, list) {
- lbs_deb_scan("Scan:(%02d) " MAC_FMT ", RSSI[%03d], SSID[%s]\n",
- i++, MAC_ARG(iter_bss->bssid), (s32) iter_bss->rssi,
- escape_essid(iter_bss->ssid, iter_bss->ssid_len));
- }
- mutex_unlock(&adapter->lock);
-}
-
-/**
* @brief Create a channel list for the driver to scan based on region info
*
* Use the driver region/band information to construct a comprehensive list
@@ -791,6 +759,10 @@ int wlan_scan_networks(wlan_private * priv,
u8 scancurrentchanonly;
int maxchanperscan;
int ret;
+#ifdef CONFIG_LIBERTAS_DEBUG
+ struct bss_descriptor * iter_bss;
+ int i = 0;
+#endif
lbs_deb_enter(LBS_DEB_ASSOC);
@@ -832,11 +804,16 @@ int wlan_scan_networks(wlan_private * priv,
puserscanin,
full_scan);
- /* Process the resulting scan table:
- * - Remove any bad ssids
- * - Update our current BSS information from scan data
- */
- wlan_scan_process_results(priv);
+#ifdef CONFIG_LIBERTAS_DEBUG
+ /* Dump the scan table */
+ mutex_lock(&adapter->lock);
+ list_for_each_entry (iter_bss, &adapter->network_list, list) {
+ lbs_deb_scan("Scan:(%02d) " MAC_FMT ", RSSI[%03d], SSID[%s]\n",
+ i++, MAC_ARG(iter_bss->bssid), (s32) iter_bss->rssi,
+ escape_essid(iter_bss->ssid, iter_bss->ssid_len));
+ }
+ mutex_unlock(&adapter->lock);
+#endif
if (priv->adapter->connect_status == libertas_connected) {
netif_carrier_on(priv->dev);
diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c
index 8939251..f42b796 100644
--- a/drivers/net/wireless/libertas/wext.c
+++ b/drivers/net/wireless/libertas/wext.c
@@ -913,148 +913,6 @@ out:
return 0;
}
-/*
- * iwpriv settable callbacks
- */
-
-static const iw_handler wlan_private_handler[] = {
- NULL, /* SIOCIWFIRSTPRIV */
-};
-
-static const struct iw_priv_args wlan_private_args[] = {
- /*
- * { cmd, set_args, get_args, name }
- */
- /* Using iwpriv sub-command feature */
- {
- WLAN_SETONEINT_GETNONE, /* IOCTL: 24 */
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- ""},
- {
- WLANSETREGION,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setregioncode"},
- {
- WLAN_SUBCMD_MESH_SET_TTL,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "mesh_set_ttl"},
- {
- WLAN_SETNONE_GETONEINT,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- ""},
- {
- WLANGETREGION,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getregioncode"},
- {
- WLAN_SUBCMD_FWT_CLEANUP,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "fwt_cleanup"},
- {
- WLAN_SUBCMD_FWT_TIME,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "fwt_time"},
- {
- WLAN_SUBCMD_MESH_GET_TTL,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "mesh_get_ttl"},
- {
- WLAN_SETNONE_GETNONE,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- ""},
- {
- WLAN_SUBCMD_FWT_RESET,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "fwt_reset"},
- {
- WLAN_SUBCMD_BT_RESET,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "bt_reset"},
- {
- WLAN_SET128CHAR_GET128CHAR,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- ""},
- /* BT Management */
- {
- WLAN_SUBCMD_BT_ADD,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- "bt_add"},
- {
- WLAN_SUBCMD_BT_DEL,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- "bt_del"},
- {
- WLAN_SUBCMD_BT_LIST,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- "bt_list"},
- {
- WLAN_SUBCMD_BT_SET_INVERT,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "bt_set_invert"},
- {
- WLAN_SUBCMD_BT_GET_INVERT,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "bt_get_invert"},
- /* FWT Management */
- {
- WLAN_SUBCMD_FWT_ADD,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- "fwt_add"},
- {
- WLAN_SUBCMD_FWT_DEL,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- "fwt_del"},
- {
- WLAN_SUBCMD_FWT_LOOKUP,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- "fwt_lookup"},
- {
- WLAN_SUBCMD_FWT_LIST_NEIGHBOR,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- "fwt_list_neigh"},
- {
- WLAN_SUBCMD_FWT_LIST,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- "fwt_list"},
- {
- WLAN_SUBCMD_FWT_LIST_ROUTE,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- "fwt_list_route"},
- {
- WLAN_SET_GET_SIXTEEN_INT,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- ""},
- {
- WLAN_LED_GPIO_CTRL,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "ledgpio"},
-};
-
static struct iw_statistics *wlan_get_wireless_stats(struct net_device *dev)
{
enum {
@@ -2444,22 +2302,12 @@ static const iw_handler mesh_wlan_handler[] = {
};
struct iw_handler_def libertas_handler_def = {
.num_standard = sizeof(wlan_handler) / sizeof(iw_handler),
- .num_private = sizeof(wlan_private_handler) / sizeof(iw_handler),
- .num_private_args = sizeof(wlan_private_args) /
- sizeof(struct iw_priv_args),
.standard = (iw_handler *) wlan_handler,
- .private = (iw_handler *) wlan_private_handler,
- .private_args = (struct iw_priv_args *)wlan_private_args,
.get_wireless_stats = wlan_get_wireless_stats,
};
struct iw_handler_def mesh_handler_def = {
.num_standard = sizeof(mesh_wlan_handler) / sizeof(iw_handler),
- .num_private = sizeof(wlan_private_handler) / sizeof(iw_handler),
- .num_private_args = sizeof(wlan_private_args) /
- sizeof(struct iw_priv_args),
.standard = (iw_handler *) mesh_wlan_handler,
- .private = (iw_handler *) wlan_private_handler,
- .private_args = (struct iw_priv_args *)wlan_private_args,
.get_wireless_stats = wlan_get_wireless_stats,
};
diff --git a/drivers/net/wireless/libertas/wext.h b/drivers/net/wireless/libertas/wext.h
index d555056..3d5196c 100644
--- a/drivers/net/wireless/libertas/wext.h
+++ b/drivers/net/wireless/libertas/wext.h
@@ -7,45 +7,6 @@
#define SUBCMD_OFFSET 4
#define SUBCMD_DATA(x) *((int *)(x->u.name + SUBCMD_OFFSET))
-/** PRIVATE CMD ID */
-#define WLANIOCTL SIOCIWFIRSTPRIV
-
-#define WLAN_SETNONE_GETNONE (WLANIOCTL + 8)
-#define WLAN_SUBCMD_BT_RESET 13
-#define WLAN_SUBCMD_FWT_RESET 14
-
-#define WLAN_SETNONE_GETONEINT (WLANIOCTL + 15)
-#define WLANGETREGION 1
-
-#define WLAN_SUBCMD_FWT_CLEANUP 15
-#define WLAN_SUBCMD_FWT_TIME 16
-#define WLAN_SUBCMD_MESH_GET_TTL 17
-#define WLAN_SUBCMD_BT_GET_INVERT 18
-
-#define WLAN_SETONEINT_GETNONE (WLANIOCTL + 24)
-#define WLANSETREGION 8
-#define WLAN_SUBCMD_MESH_SET_TTL 18
-#define WLAN_SUBCMD_BT_SET_INVERT 19
-
-#define WLAN_SET128CHAR_GET128CHAR (WLANIOCTL + 25)
-#define WLAN_SUBCMD_BT_ADD 18
-#define WLAN_SUBCMD_BT_DEL 19
-#define WLAN_SUBCMD_BT_LIST 20
-#define WLAN_SUBCMD_FWT_ADD 21
-#define WLAN_SUBCMD_FWT_DEL 22
-#define WLAN_SUBCMD_FWT_LOOKUP 23
-#define WLAN_SUBCMD_FWT_LIST_NEIGHBOR 24
-#define WLAN_SUBCMD_FWT_LIST 25
-#define WLAN_SUBCMD_FWT_LIST_ROUTE 26
-
-#define WLAN_SET_GET_SIXTEEN_INT (WLANIOCTL + 29)
-#define WLAN_LED_GPIO_CTRL 5
-
-#define WLAN_LINKMODE_802_3 0
-#define WLAN_LINKMODE_802_11 2
-#define WLAN_RADIOMODE_NONE 0
-#define WLAN_RADIOMODE_RADIOTAP 2
-
/** wlan_ioctl_regrdwr */
struct wlan_ioctl_regrdwr {
/** Which register to access */
@@ -57,9 +18,13 @@ struct wlan_ioctl_regrdwr {
u32 value;
};
+#define WLAN_LINKMODE_802_3 0
+#define WLAN_LINKMODE_802_11 2
+#define WLAN_RADIOMODE_NONE 0
+#define WLAN_RADIOMODE_RADIOTAP 2
+
extern struct iw_handler_def libertas_handler_def;
extern struct iw_handler_def mesh_handler_def;
-int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int i);
int wlan_radio_ioctl(wlan_private * priv, u8 option);
#endif /* _WLAN_WEXT_H_ */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
