Re: 2.6.22-rc: regression: no irda0 interface (2.6.21 was OK), smsc does not find chip

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Andrey,

Can you try the following patch?  It applies on top of the previous
two patches, and it is enough to make the driver find the device on
my Portege 4000.  Unfortunately, I can't tell whether it really works
because I don't have a clue about how to make two IR devices talk
to each other.

Bjorn

Index: w/drivers/pnp/quirks.c
===================================================================
--- w.orig/drivers/pnp/quirks.c	2007-06-27 20:07:45.000000000 -0600
+++ w/drivers/pnp/quirks.c	2007-06-27 20:57:47.000000000 -0600
@@ -136,11 +136,11 @@
 
 static void quirk_smc_enable(struct pnp_dev *dev)
 {
-	/*
-	 * If the BIOS left the device disabled, or it is enabled and
-	 * responding correctly, we're in good shape.
-	 */
-	if (!dev->active || quirk_smc_fir_enabled(dev))
+	unsigned int irq;
+	unsigned long flags;
+
+	pnp_activate_dev(dev);
+	if (quirk_smc_fir_enabled(dev))
 		return;
 
 	/*
@@ -159,9 +159,34 @@
 	pnp_init_resource_table(&dev->res);
 	pnp_auto_config_dev(dev);
 	pnp_activate_dev(dev);
+	if (quirk_smc_fir_enabled(dev))
+		return;
+
+	/*
+	 * The Toshiba Portege 4000 reports the IRQ as active high,
+	 * edge-triggered, but the device only seems to work when we
+	 * program it as something else.
+	 */
+	irq = pnp_irq(dev, 0);
+	flags = pnp_irq_flags(dev, 0);
+	pnp_disable_dev(dev);
+	dev->res.irq_resource[0].start = irq;
+	dev->res.irq_resource[0].end   = irq;
+	flags &= ~IORESOURCE_AUTO;
+	if ((flags & IORESOURCE_BITS) == IORESOURCE_IRQ_HIGHEDGE) {
+		flags &= ~IORESOURCE_BITS;
+		flags |= IORESOURCE_IRQ_LOWEDGE;
+		dev_err(&dev->dev, "still not responding, changing high-edge "
+			"IRQ to low-edge\n");
+	}
+	dev->res.irq_resource[0].flags = flags;
+	pnp_activate_dev(dev);
+
+	if (quirk_smc_fir_enabled(dev))
+		return;
 
-	if (!quirk_smc_fir_enabled(dev))
-		dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\"\n");
+	dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\" and "
+		"email [email protected]\n");
 }
 
 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux