[PATCH] serial: Clear proper MPSC interrupt cause bits

["Mark A. Greer" <mgreer@mvista.com>]

From: Jay Lubomirski <jaylubo@motorola.com>

The interrupt clearing code in mpsc_sdma_intr_ack() mistakenly clears the
interrupt for both controllers instead of just the one its supposed to.
This can result in the other controller appearing to hang because its
interrupt was effectively lost.

So, don't clear the interrupt cause bits for both MPSC controllers when
clearing the interrupt for one of them.  Just clear the one that is
supposed to be cleared.

Signed-off-by: Jay Lubomirski <jaylubo@motorola.com>
Acked-by: Mark A. Greer <mgreer@mvista.com>
---
Please add this to 2.6.21.x and 2.6.22-rc6, if its not too late.

 drivers/serial/mpsc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index d09f209..00924fe 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -503,7 +503,8 @@ mpsc_sdma_intr_ack(struct mpsc_port_info *pi)
 
 	if (pi->mirror_regs)
 		pi->shared_regs->SDMA_INTR_CAUSE_m = 0;
-	writel(0, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE);
+	writeb(0x00, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE +
+	       pi->port.line);
 	return;
 }
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/