On Mon, 18 Jun 2007 11:33:54 +0100
Russell King wrote:
> On Mon, Jun 18, 2007 at 01:21:21PM +0300, Ivan Kuten wrote:
> > Hi Haavard,
> >
> > I tried /dev/ttyAT3, break appeared but not the way I expected, after:
> > stty -F /dev/ttyAT3 brkint I get:
> >
> > cat /proc/tty/driver/atmel_serial
> > serinfo:1.0 driver revision:
> > 0: uart:ATMEL_SERIAL mmio:0xFEFFF200 irq:1 tx:0 rx:0 CTS|DSR|CD|RI
> > 1: uart:ATMEL_SERIAL mmio:0xFFFC0000 irq:6 tx:0 rx:0 CTS|DSR|CD|RI
> > 2: uart:ATMEL_SERIAL mmio:0xFFFC4000 irq:7 tx:0 rx:0 RI
> > 3: uart:ATMEL_SERIAL mmio:0xFFFC8000 irq:8 tx:1530 rx:115 brk:1 RTS|DTR|DSR|CD|RI
> > 4: uart:ATMEL_SERIAL mmio:0xFFFCC000 irq:9 tx:0 rx:0 DSR|CD|RI
> >
> > brk is 1 not depending on how many breaks was sent. May be I missunderstood
> > "break" meaning?
> > I use from minicom: Main Functions : send break.........F .
>
> Note that if you want to use magic sysrq on ttyAT3, you need the kernel
> console on ttyAT3. Since you successfully received one break event on
> ttyAT3, the next character should have caused a sysrq event.
>
Yes, I added to kernel command line "console=ttyAT3,115200" .
I do not receive brk event via minicom, break counter sets to 1 only if I issue
this command: stty -F /dev/ttyAT3 brkint
Anyway I try to debug further to locate the problem.
BR,
Ivan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
