[patch #2 2/6] SM501: initialise SDRAM clock before bus clocks

[ben@fluff.org.uk]

This init sequence of setting the SDRAM clock before the
bus clock is recommend by Silicon Motion to stop problems
with writes not sticking into registers.

Signed-off-by: Vincent Sanders <vince@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Index: linux-2.6.21-quilt8/drivers/mfd/sm501.c
===================================================================
--- linux-2.6.21-quilt8.orig/drivers/mfd/sm501.c	2007-06-07 12:12:38.000000000 +0100
+++ linux-2.6.21-quilt8/drivers/mfd/sm501.c	2007-06-07 12:13:03.000000000 +0100
@@ -833,15 +833,15 @@ static void sm501_init_regs(struct sm501
 	sm501_init_reg(sm, SM501_GPIO31_0_CONTROL, &init->gpio_low);
 	sm501_init_reg(sm, SM501_GPIO63_32_CONTROL, &init->gpio_high);
 
-	if (init->mclk) {
-		dev_info(sm->dev, "setting MCLK to %ld\n", init->mclk);
-		sm501_set_clock(sm->dev, SM501_CLOCK_MCLK, init->mclk);
-	}
-
 	if (init->m1xclk) {
 		dev_info(sm->dev, "setting M1XCLK to %ld\n", init->m1xclk);
 		sm501_set_clock(sm->dev, SM501_CLOCK_M1XCLK, init->m1xclk);
 	}
+
+	if (init->mclk) {
+		dev_info(sm->dev, "setting MCLK to %ld\n", init->mclk);
+		sm501_set_clock(sm->dev, SM501_CLOCK_MCLK, init->mclk);
+	}
 }
 
 static unsigned int sm501_mem_local[] = {

-- 
Ben (ben@fluff.org, http://www.fluff.org/)

  'a smiley only costs 4 bytes'
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/