On Mon, Jun 18, 2007 at 10:28:38AM -0700, [email protected] wrote:
> I plan to test the different configurations.
>
> however, if I was saturating the bus with the reconstruct how can I fire
> off a dd if=/dev/zero of=/mnt/test and get ~45M/sec whild only slowing the
> reconstruct to ~4M/sec?
>
> I'm putting 10x as much data through the bus at that point, it would seem
> to proove that it's not the bus that's saturated.
dd 45MB/s from the raid sounds reasonable.
If you have 45 drives, doing a resync of raid5 or radi6 should probably
involve reading all the disks, and writing new parity data to one drive.
So if you are writing 5MB/s, then you are reading 44*5MB/s from the
other drives, which is 220MB/s. If your resync drops to 4MB/s when
doing dd, then you have 44*4MB/s which is 176MB/s or 44MB/s less read
capacity, which surprisingly seems to match the dd speed you are
getting. Seems like you are indeed very much saturating a bus
somewhere. The numbers certainly agree with that theory.
What kind of setup is the drives connected to?
--
Len Sorensen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
