I've been reading up on the Intel HD Audio specifications, and I found
that the problem is most likely that the driver has to resort to PI/O
(single_cmd) mode. I really haven't had enough time or experience to
figure out what is actually causing this. This is the first time I've
done any kernel development; thankfully, Intel has good documentation.
I'm going to keep hacking to see what information I can figure out.
I just tried 2.6.22-rc5, and no behavior has changed.
----
Matt Mullins
On 6/17/07, Rafael J. Wysocki <[email protected]> wrote:
On Sunday, 17 June 2007 03:36, Matt Mullins wrote:
> I just received a Dell Latitude D630, with the new Intel Santa Rosa
> platform. Currently, the only major driver issue I have is sound. It
> worked fine in Ubuntu Feisty's 2.6.20 kernel, but now I am using Gutsy
> so I can have graphics drivers. Gutsy's 2.6.22-rc3-based kernel no
> longer recognized my soundcard, a Sigmatel STAC9205, which uses the
> hda_intel driver. I have since fixed that problem by compiling the
> hda_intel driver into the kernel (I used 2.6.22-rc4 vanilla sources),
> instead of a module, but it is still a bug that it does not work as a
> module.
>
> All the following debug information was obtained from kernel 2.6.22-rc4.
>
> However, the bug that is currently affecting me is that sound no
> longer works after using ACPI suspend-to-RAM or swsusp. I compiled
> ALSA debugging in, and as soon as I resume, I get tons of messages
> like:
> [ 8.474830] hda-intel: send_cmd timeout: IRS=0x1, val=0xd0970500
> [ 8.474954] hda-intel: send_cmd timeout: IRS=0x1, val=0xd0af0009
> [ 8.475078] hda-intel: send_cmd timeout: IRS=0x1, val=0xd0a70500
> [ 8.475207] hda-intel: send_cmd timeout: IRS=0x1, val=0xd0bf0009
> (etc)
>
> There may be more before that, but that is more than the kernel
> message buffer can hold, so I can't ever see it. I get similar
> timeout messages each time a PCM gets set up:
> [ 8.972859] hda_codec_setup_stream: NID=0x10, stream=0x5, channel=0, format=0
> x11
> [ 8.972987] hda-intel: send_cmd timeout: IRS=0x1, val=0x1070650
> [ 9.006071] hda-intel: send_cmd timeout: IRS=0x1, val=0x1020011
> [ 9.006081] hda_codec_setup_stream: NID=0x11, stream=0x5, channel=0, format=0
> x11
> [ 9.006207] hda-intel: send_cmd timeout: IRS=0x1, val=0x1170650
> [ 9.016117] hda-intel: send_cmd timeout: IRS=0x1, val=0x1120011
>
> I read some of sound/pci/hda/hda_intel.c, specifically the code that
> output those messages. After octupling my kernel log buffer (to 1MB),
> I noticed that for the first set of timeouts (immediately upon
> resume), all the "codec" nibbles are odd, the last word of the val
> ("verb" and "para") are all either 0x0500 or 0x0009. For the second
> set (when something tries to use the card) that last word is 0x0650 or
> 0x0011.
>
> I have yet to go back and re-test compiling snd-hda-intel as a module.
Well, the ALSA people should be notified of that in the first place (CCs
added).
Greetings,
Rafael
--
"Premature optimization is the root of all evil." - Donald Knuth
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]