Re: raid1 with nbd member hangs MD on SLES10 and RHEL5

["Mike Snitzer" <snitzer@gmail.com>]

On 6/14/07, Paul Clements <paul.clements@steeleye.com> wrote:
> Mike Snitzer wrote:
> > On 6/14/07, Paul Clements <paul.clements@steeleye.com> wrote:
> >> Mike Snitzer wrote:
> >>
> >> > Here are the steps to reproduce reliably on SLES10 SP1:
> >> > 1) establish a raid1 mirror (md0) using one local member (sdc1) and
> >> > one remote member (nbd0)
> >> > 2) power off the remote machine, whereby severing nbd0's connection
> >> > 3) perform IO to the filesystem that is on the md0 device to enduce
> >> > the MD layer to mark the nbd device as "faulty"
> >> > 4) cat /proc/mdstat hangs, sysrq trace was collected
> >>
> >> That's working as designed. NBD works over TCP. You're going to have to
> >> wait for TCP to time out before an error occurs. Until then I/O will
> >> hang.
> >
> > With kernel.org 2.6.15.7 (uni-processor) I've not seen NBD hang in the
> > kernel like I am with RHEL5 and SLES10.  This hang (tcp timeout) is
> > indefinite oh RHEL5 and ~5min on SLES10.
> >
> > Should/can I be playing with TCP timeout values?  Why was this not a
> > concern with kernel.org 2.6.15.7; I was able to "feel" the nbd
> > connection break immediately; no MD superblock update hangs, no
> > longwinded (or indefinite) TCP timeout.
>
> I don't know. I've never seen nbd immediately start returning I/O
> errors. Perhaps something was different about the configuration?
> If the other other machine rebooted quickly, for instance, you'd get a
> connection reset, which would kill the nbd connection.

OK, I'll retest the 2.6.15.7 setup.  As for SLES10 and RHEL5, I've
been leaving the remote server powered off.  As such I'm at the full
mercy of the TCP timeout.  It is odd that RHEL5 has been hanging
indefinitely but I'll dig deeper on that once I come to terms with how
kernel.org and SLES10 behaves.

I'll update with my findings for completeness.

Thanks for your insight!
Mike
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/