This is an update to the zs.c driver to make it wait for the transmission
line to become idle before disabling the transmitter or resetting the
chip. This way the character that is on the way at the time one of these
actions is about to be performed does not get corrupted.
Plus a change to reset the index/data pointer first before issuing a chip
reset just in case the state is wrong when control of the chip is taken
the first time.
Signed-off-by: Maciej W. Rozycki <[email protected]>
---
These are almost obvious, but I have run-time tested them just in case.
They make the switch from the initial (early printk) PROM-based console
less disruptive. The change to load_zsregs() also affects set_termios().
Please apply,
Maciej
patch-mips-2.6.21-20070502-zs-serial-drain-3
diff -up --recursive --new-file linux-mips-2.6.21-20070502.macro/drivers/serial/zs.c linux-mips-2.6.21-20070502/drivers/serial/zs.c
--- linux-mips-2.6.21-20070502.macro/drivers/serial/zs.c 2007-06-05 11:08:24.000000000 +0000
+++ linux-mips-2.6.21-20070502/drivers/serial/zs.c 2007-06-05 11:08:57.000000000 +0000
@@ -240,10 +240,24 @@ static int zs_transmit_drain(struct zs_p
return loops;
}
+static int zs_line_drain(struct zs_port *zport, int irq)
+{
+ struct zs_scc *scc = zport->scc;
+ int loops = 10000;
+
+ while (!(read_zsreg(zport, R1) & ALL_SNT) && loops--) {
+ zs_spin_unlock_cond_irq(&scc->zlock, irq);
+ udelay(2);
+ zs_spin_lock_cond_irq(&scc->zlock, irq);
+ }
+ return loops;
+}
+
static void load_zsregs(struct zs_port *zport, u8 *regs, int irq)
{
- zs_transmit_drain(zport, irq);
+ /* Let the current transmission finish. */
+ zs_line_drain(zport, irq);
/* Load 'em up. */
write_zsreg(zport, R3, regs[3] & ~RxENABLE);
write_zsreg(zport, R5, regs[5] & ~TxENAB);
@@ -814,6 +828,10 @@ static void zs_reset(struct zs_port *zpo
spin_lock_irqsave(&scc->zlock, flags);
irq = !irqs_disabled_flags(flags);
if (!scc->initialised) {
+ /* Reset the pointer first, just in case... */
+ read_zsreg(zport, R0);
+ /* And let the current transmission finish. */
+ zs_line_drain(zport, irq);
write_zsreg(zport, R9, FHWRES);
udelay(10);
write_zsreg(zport, R9, 0);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
