James: Add rudimentary TSC-based clocksource support (based on Rusty's original
patch).
Rusty: Add rudimentary code to handle TSC changing. We can use the native
sched_clock again, we just have to tell it the TSC speed (get_cpu_khz).
(Note on benchmarks: Linux only sets the clock to the nearest second,
so expect it to be up to up to 1000000000 ns out. But the narrowness
of the max - min range indicates consistency.)
Before:
Approximate accuracy of clock: 827460500 (819802000 - 834640500)
After:
Approximate accuracy of clock: 326354500 (326257000 - 327937500)
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Rusty Russell <[email protected]>
---
arch/i386/kernel/tsc.c | 1 +
drivers/lguest/core.c | 9 +++++++++
drivers/lguest/lg.h | 1 +
drivers/lguest/lguest.c | 40 ++++++++++++++++++++++++++++++++--------
include/linux/lguest.h | 2 ++
5 files changed, 45 insertions(+), 8 deletions(-)
===================================================================
--- a/arch/i386/kernel/tsc.c
+++ b/arch/i386/kernel/tsc.c
@@ -27,6 +27,7 @@ static int tsc_enabled;
* an extra value to store the TSC freq
*/
unsigned int tsc_khz;
+EXPORT_SYMBOL_GPL(tsc_khz);
int tsc_disable;
===================================================================
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -332,6 +333,14 @@ int run_guest(struct lguest *lg, unsigne
continue;
}
+ /* If the Guest hasn't been told the clock multiplier to use or
+ * it's changed, we update it here. */
+ if (unlikely(lg->tsc_khz != tsc_khz) && lg->lguest_data) {
+ lg->tsc_khz = tsc_khz;
+ if (put_user(lg->tsc_khz, &lg->lguest_data->tsc_khz))
+ return -EFAULT;
+ }
+
local_irq_disable();
/* Even if *we* don't want FPU trap, guest might... */
===================================================================
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -160,6 +160,7 @@ struct lguest
unsigned long pending_key; /* address they're sending to */
unsigned int stack_pages;
+ u32 tsc_khz;
struct lguest_dma_info dma[LGUEST_MAX_DMA];
===================================================================
--- a/drivers/lguest/lguest.c
+++ b/drivers/lguest/lguest.c
@@ -25,6 +25,7 @@
#include <linux/screen_info.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/clocksource.h>
#include <linux/lguest.h>
#include <linux/lguest_launcher.h>
#include <linux/lguest_bus.h>
@@ -37,6 +38,7 @@
#include <asm/e820.h>
#include <asm/mce.h>
#include <asm/io.h>
+#include <asm/sched-clock.h>
/* Declarations for definitions in lguest_guest.S */
extern char lguest_noirq_start[], lguest_noirq_end[];
@@ -209,8 +211,8 @@ static void lguest_cpuid(unsigned int *e
case 1: /* Basic feature request. */
/* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
*ecx &= 0x00002201;
- /* Similarly: SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, FPU. */
- *edx &= 0x07808101;
+ /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU. */
+ *edx &= 0x07808111;
/* Host wants to know when we flush kernel pages: set PGE. */
*edx |= 0x00002000;
break;
@@ -345,24 +347,46 @@ static unsigned long lguest_get_wallcloc
return hcall(LHCALL_GET_WALLCLOCK, 0, 0, 0);
}
+/* This is what we tell the kernel is our clocksource. It's the normal "Time
+ * Stamp Counter": the Host tells us what speed it's going at. */
+static struct clocksource lguest_clock = {
+ .name = "lguest",
+ .rating = 400,
+ .read = native_read_tsc,
+ .mask = CLOCKSOURCE_MASK(64),
+ .mult = 0, /* to be set */
+ .shift = 22,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
{
+ /* Check in case host TSC has changed rate. */
+ if (unlikely(tsc_khz != lguest_data.tsc_khz)) {
+ tsc_khz = lguest_data.tsc_khz;
+ lguest_clock.mult = clocksource_khz2mult(tsc_khz, 22);
+ __get_cpu_var(sc_data).cyc2ns_scale
+ = (1000000 << CYC2NS_SCALE_FACTOR) / tsc_khz;
+ }
do_timer(hcall(LHCALL_TIMER_READ, 0, 0, 0));
update_process_times(user_mode_vm(get_irq_regs()));
}
-static u64 sched_clock_base;
static void lguest_time_init(void)
{
set_irq_handler(0, lguest_time_irq);
+
+ lguest_clock.mult = clocksource_khz2mult(tsc_khz, 22);
+ clocksource_register(&lguest_clock);
+
hcall(LHCALL_TIMER_READ, 0, 0, 0);
- sched_clock_base = jiffies_64;
enable_lguest_irq(0);
}
-static unsigned long long lguest_sched_clock(void)
-{
- return (jiffies_64 - sched_clock_base) * (1000000000 / HZ);
+static unsigned long lguest_get_cpu_khz(void)
+{
+ /* The Host tells us the TSC speed */
+ return lguest_data.tsc_khz;
}
static void lguest_load_esp0(struct tss_struct *tss,
@@ -501,7 +525,7 @@ __init void lguest_init(void *boot)
paravirt_ops.time_init = lguest_time_init;
paravirt_ops.set_lazy_mode = lguest_lazy_mode;
paravirt_ops.wbinvd = lguest_wbinvd;
- paravirt_ops.sched_clock = lguest_sched_clock;
+ paravirt_ops.get_cpu_khz = lguest_get_cpu_khz;
hcall(LHCALL_LGUEST_INIT, __pa(&lguest_data), 0, 0);
===================================================================
--- a/include/linux/lguest.h
+++ b/include/linux/lguest.h
@@ -70,6 +70,8 @@ struct lguest_data
unsigned long reserve_mem;
/* ID of this guest (used by network driver to set ethernet address) */
u16 guestid;
+ /* KHz for the TSC clock. */
+ u32 tsc_khz;
/* Fields initialized by the guest at boot: */
/* Instruction range to suppress interrupts even if enabled */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
