This is kernel port of LZO1X-1 compressor and LZO1X decompressor (safe
version only).
* Changes since 'take 5' (Full Changelog after this):
- Added compressor and decomrpesssor as separate and hidden config
options (default: n)
- Cleanups: removed LZO_CHECK_MPOS_NON_DET macro
- removed PTR* macros.
* Benchmarks: (system: P4 3GHz, 1G RAM)
(Using tester program from Daniel)
Following compares this kernel port ('take 6') vs original miniLZO code:
'TinyLZO' refers to this kernel port.
10000 run averages:
'Tiny LZO':
Combined: 61.2223 usec
Compression: 41.8412 usec
Decompression: 19.3811 usec
'miniLZO':
Combined: 66.0444 usec
Compression: 46.6323 usec
Decompression: 19.4121 usec
Result:
Overall: TinyLZO is 7.3% faster
Compressor: TinyLZO is 10.2% faster
Decompressor: TinyLZO is 0.15% faster
TODO: test 'take 6' port on archs other than x86(_32)
* Changelog vs. original LZO:
1) Used standard/kernel defined data types: (this eliminated _huge_
#ifdef chunks)
lzo_bytep -> unsigned char *
lzo_uint -> size_t
lzo_xint -> size_t
lzo_uint32p -> u32 *
lzo_uintptr_t -> unsigned long
2) Removed everything #ifdef'ed under COPY_DICT (this is not set for
LZO1X, so removed corres. parts).
3) Removed code #ifdef'ed for LZO1Y, LZO1Z, other variants.
4) Reformatted the code to match general kernel style.
5) The only code change: (as suggested by Andrey)
-#if defined(__LITTLE_ENDIAN)
- m_pos = op - 1;
- m_pos -= (*(const unsigned short *)ip) >> 2;
-#else
- m_pos = op - 1;
- m_pos -= (ip[0] >> 2) + (ip[1] << 6);
-#endif
+ m_pos = op - 1 - (cpu_to_le16(*(const u16 *)ip) >> 2);
(Andrey suggested le16_to_cpu for above but I think it should be cpu_to_le16).
*** Need testing on big endian machine ***
Similarly:
-#if defined(__LITTLE_ENDIAN)
- m_pos -= (*(const unsigned short *)ip) >> 2;
-#else
- m_pos -= (ip[0] >> 2) + (ip[1] << 6);
-#endif
+ m_pos -= cpu_to_le16(*(const u16 *)ip) >> 2;
6) Get rid of LZO_CHECK_MPOS_NON_DET macro and PTR* macros.
I think it's now ready for mainline inclusion.
include/linux/lzo1x.h | 66 +++++++++++
lib/Kconfig | 6 +
lib/Makefile | 2 +
lib/lzo1x/Makefile | 2 +
lib/lzo1x/lzo1x_compress.c | 259 ++++++++++++++++++++++++++++++++++++++++++
lib/lzo1x/lzo1x_decompress.c | 238 ++++++++++++++++++++++++++++++++++++++
lib/lzo1x/lzo1x_int.h | 85 ++++++++++++++
7 files changed, 658 insertions(+), 0 deletions(-)
Signed-off-by: Nitin Gupta <nitingupta910 [at] gmail [dot] com>
---
diff --git a/include/linux/lzo1x.h b/include/linux/lzo1x.h
new file mode 100755
index 0000000..11a6f23
--- /dev/null
+++ b/include/linux/lzo1x.h
@@ -0,0 +1,66 @@
+/* lzo1x.h -- public interface of the LZO1X compression algorithm
+
+ This file is part of the LZO real-time data compression library.
+
+ Copyright (C) 1996-2005 Markus Franz Xaver Johannes Oberhumer
+ All Rights Reserved.
+
+ The LZO library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ The LZO library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with the LZO library; see the file COPYING.
+ If not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+ Markus F.X.J. Oberhumer
+ <[email protected]>
+ http://www.oberhumer.com/opensource/lzo/
+
+
+ This file is modified version of lzo1x.h found in original LZO 2.02
+ code. Some additional changes have also been made to make it work
+ in kernel space.
+
+ Nitin Gupta
+ <[email protected]>
+ */
+
+#ifndef __LZO1X_H
+#define __LZO1X_H
+
+/* LZO return codes */
+#define LZO_E_OK 0
+#define LZO_E_ERROR (-1)
+#define LZO_E_OUT_OF_MEMORY (-2) /* [not used right now] */
+#define LZO_E_NOT_COMPRESSIBLE (-3) /* [not used right now] */
+#define LZO_E_INPUT_OVERRUN (-4)
+#define LZO_E_OUTPUT_OVERRUN (-5)
+#define LZO_E_LOOKBEHIND_OVERRUN (-6)
+#define LZO_E_EOF_NOT_FOUND (-7)
+#define LZO_E_INPUT_NOT_CONSUMED (-8)
+#define LZO_E_NOT_YET_IMPLEMENTED (-9) /* [not used right now] */
+
+/* Size of temp buffer (workmem) required by lzo1x_compress */
+#define LZO1X_WORKMEM_SIZE ((size_t) (16384L * sizeof(unsigned char *)))
+
+/*
+ * This requires 'workmem' of size LZO1X_WORKMEM_SIZE
+ */
+int lzo1x_compress(const unsigned char *src, size_t src_len,
+ unsigned char *dst, size_t *dst_len,
+ void *workmem);
+
+/*
+ * This decompressor will catch all compressed data violations and
+ * return an error code in this case.
+ */
+int lzo1x_decompress(const unsigned char *src, size_t src_len,
+ unsigned char *dst, size_t *dst_len);
+#endif
diff --git a/lib/Kconfig b/lib/Kconfig
index 2e7ae6b..eb95eaa 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -64,6 +64,12 @@ config ZLIB_INFLATE
config ZLIB_DEFLATE
tristate
+config LZO1X_COMPRESS
+ tristate
+
+config LZO1X_DECOMPRESS
+ tristate
+
#
# Generic allocator support is selected if needed
#
diff --git a/lib/Makefile b/lib/Makefile
index c8c8e20..448ae37 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -49,6 +49,8 @@ obj-$(CONFIG_GENERIC_ALLOCATOR) += genalloc.o
obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/
obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
+obj-$(CONFIG_LZO1X_COMPRESS) += lzo1x/
+obj-$(CONFIG_LZO1X_DECOMPRESS) += lzo1x/
obj-$(CONFIG_TEXTSEARCH) += textsearch.o
obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
diff --git a/lib/lzo1x/Makefile b/lib/lzo1x/Makefile
new file mode 100644
index 0000000..7b56a4d
--- /dev/null
+++ b/lib/lzo1x/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_LZO1X_COMPRESS) += lzo1x_compress.o
+obj-$(CONFIG_LZO1X_DECOMPRESS) += lzo1x_decompress.o
diff --git a/lib/lzo1x/lzo1x_compress.c b/lib/lzo1x/lzo1x_compress.c
new file mode 100755
index 0000000..b525be6
--- /dev/null
+++ b/lib/lzo1x/lzo1x_compress.c
@@ -0,0 +1,259 @@
+/* lzo1x_compress.c -- LZO1X-1 compression
+
+ This file is part of the LZO real-time data compression library.
+
+ Copyright (C) 1996-2005 Markus Franz Xaver Johannes Oberhumer
+ All Rights Reserved.
+
+ The LZO library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ The LZO library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with the LZO library; see the file COPYING.
+ If not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+ Markus F.X.J. Oberhumer
+ <[email protected]>
+ http://www.oberhumer.com/opensource/lzo/
+
+
+ This file is derived from lzo1x_1.c and lzo1x_c.ch found in original
+ LZO 2.02 code. Some additional changes have also been made to make
+ it work in kernel space.
+
+ Nitin Gupta
+ <[email protected]>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/compiler.h>
+#include <linux/lzo1x.h>
+
+#include "lzo1x_int.h"
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("LZO1X Compression");
+
+/* compress a block of data. */
+static noinline unsigned int
+lzo1x_compress_worker(const unsigned char *in, size_t in_len,
+ unsigned char *out, size_t *out_len,
+ void *workmem)
+{
+ register const unsigned char *ip;
+ unsigned char *op;
+ const unsigned char * const in_end = in + in_len;
+ const unsigned char * const ip_end = in + in_len - M2_MAX_LEN - 5;
+ const unsigned char *ii;
+ const unsigned char ** const dict = (const unsigned char **)workmem;
+
+ op = out;
+ ip = in;
+ ii = ip;
+
+ ip += 4;
+ for (;;) {
+ register const unsigned char *m_pos;
+ size_t m_off;
+ size_t m_len;
+ size_t dindex;
+
+ DINDEX1(dindex, ip);
+ m_pos = dict[dindex];
+
+ if ((m_pos < in) || (m_off = (size_t)(ip - m_pos)) <= 0
+ || m_off > M4_MAX_OFFSET)
+ goto literal;
+
+ if (m_off <= M2_MAX_OFFSET || m_pos[3] == ip[3])
+ goto try_match;
+
+ DINDEX2(dindex, ip);
+ m_pos = dict[dindex];
+
+ if ((m_pos < in) || (m_off = (size_t)(ip - m_pos)) <= 0
+ || m_off > M4_MAX_OFFSET)
+ goto literal;
+
+ if (m_off <= M2_MAX_OFFSET || m_pos[3] == ip[3])
+ goto try_match;
+
+ goto literal;
+
+try_match:
+ if (*(const unsigned short *)m_pos ==
+ *(const unsigned short *)ip) {
+ if (likely(m_pos[2] == ip[2]))
+ goto match;
+ }
+
+ /* a literal */
+literal:
+ dict[dindex] = ip;
+ ++ip;
+ if (unlikely(ip >= ip_end))
+ break;
+ continue;
+
+ /* a match */
+match:
+ dict[dindex] = ip;
+ /* store current literal run */
+ if ((size_t)(ip - ii) > 0) {
+ register size_t t = (size_t)(ip - ii);
+ if (t <= 3)
+ op[-2] |= (unsigned char)t;
+ else if (t <= 18)
+ *op++ = (unsigned char)(t - 3);
+ else {
+ register size_t tt = t - 18;
+ *op++ = 0;
+ while (tt > 255) {
+ tt -= 255;
+ *op++ = 0;
+ }
+ *op++ = (unsigned char)tt;
+ }
+ do
+ *op++ = *ii++;
+ while (--t > 0);
+ }
+
+ /* code the match */
+ ip += 3;
+ if (m_pos[3] != *ip++ || m_pos[4] != *ip++ ||
+ m_pos[5] != *ip++ || m_pos[6] != *ip++ ||
+ m_pos[7] != *ip++ || m_pos[8] != *ip++) {
+ --ip;
+ m_len = (size_t)(ip - ii);
+
+ if (m_off <= M2_MAX_OFFSET) {
+ m_off -= 1;
+ *op++ = (unsigned char)(((m_len - 1) << 5) |
+ ((m_off & 7) << 2));
+ *op++ = (unsigned char)(m_off >> 3);
+ }
+ else if (m_off <= M3_MAX_OFFSET) {
+ m_off -= 1;
+ *op++ = (unsigned char)(M3_MARKER |
+ (m_len - 2));
+ goto m3_m4_offset;
+ } else {
+ m_off -= 0x4000;
+ *op++ = (unsigned char)(M4_MARKER |
+ ((m_off & 0x4000) >> 11) |
+ (m_len - 2));
+ goto m3_m4_offset;
+ }
+ } else {
+ const unsigned char *end = in_end;
+ const unsigned char *m = m_pos + M2_MAX_LEN + 1;
+ while (ip < end && *m == *ip)
+ m++, ip++;
+ m_len = (size_t)(ip - ii);
+
+ if (m_off <= M3_MAX_OFFSET) {
+ m_off -= 1;
+ if (m_len <= 33)
+ *op++ = (unsigned char)(M3_MARKER |
+ (m_len - 2));
+ else {
+ m_len -= 33;
+ *op++ = M3_MARKER | 0;
+ goto m3_m4_len;
+ }
+ } else {
+ m_off -= 0x4000;
+ if (m_len <= M4_MAX_LEN)
+ *op++ = (unsigned char)(M4_MARKER |
+ ((m_off & 0x4000) >> 11) |
+ (m_len - 2));
+ else {
+ m_len -= M4_MAX_LEN;
+ *op++ = (unsigned char)(M4_MARKER |
+ ((m_off & 0x4000) >> 11));
+m3_m4_len:
+ while (m_len > 255) {
+ m_len -= 255;
+ *op++ = 0;
+ }
+ *op++ = (unsigned char)(m_len);
+ }
+ }
+
+m3_m4_offset:
+ *op++ = (unsigned char)((m_off & 63) << 2);
+ *op++ = (unsigned char)(m_off >> 6);
+ }
+
+ ii = ip;
+ if (unlikely(ip >= ip_end))
+ break;
+ }
+
+ *out_len = (size_t)(op - out);
+ return (size_t)(in_end - ii);
+}
+
+
+/*
+ * This requires buffer (workmem) of size LZO1X_WORKMEM_SIZE
+ * (exported by lzo1x.h).
+ */
+int
+lzo1x_compress(const unsigned char *in, size_t in_len,
+ unsigned char *out, size_t *out_len,
+ void *workmem)
+{
+ unsigned char *op = out;
+ size_t t;
+
+ if (!workmem)
+ return -EINVAL;
+
+ if (unlikely(in_len <= M2_MAX_LEN + 5))
+ t = in_len;
+ else {
+ t = lzo1x_compress_worker(in, in_len, op, out_len, workmem);
+ op += *out_len;
+ }
+
+ if (t > 0) {
+ const unsigned char *ii = in + in_len - t;
+
+ if (op == out && t <= 238)
+ *op++ = (unsigned char)(17 + t);
+ else if (t <= 3)
+ op[-2] |= (unsigned char)t;
+ else if (t <= 18)
+ *op++ = (unsigned char)(t - 3);
+ else {
+ size_t tt = t - 18;
+ *op++ = 0;
+ while (tt > 255) {
+ tt -= 255;
+ *op++ = 0;
+ }
+ *op++ = (unsigned char)tt;
+ }
+ do
+ *op++ = *ii++;
+ while (--t > 0);
+ }
+ *op++ = M4_MARKER | 1;
+ *op++ = 0;
+ *op++ = 0;
+
+ *out_len = (size_t)(op - out);
+ return LZO_E_OK;
+}
+
+EXPORT_SYMBOL(lzo1x_compress);
diff --git a/lib/lzo1x/lzo1x_decompress.c b/lib/lzo1x/lzo1x_decompress.c
new file mode 100755
index 0000000..75ce294
--- /dev/null
+++ b/lib/lzo1x/lzo1x_decompress.c
@@ -0,0 +1,238 @@
+/* lzo1x_decompress.c -- LZO1X decompression
+
+ This file is part of the LZO real-time data compression library.
+
+ Copyright (C) 1996-2005 Markus Franz Xaver Johannes Oberhumer
+ All Rights Reserved.
+
+ The LZO library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ The LZO library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with the LZO library; see the file COPYING.
+ If not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+ Markus F.X.J. Oberhumer
+ <[email protected]>
+ http://www.oberhumer.com/opensource/lzo/
+
+
+ This file is derived from lzo1x_d1.c and lzo1x_d.ch found in original
+ LZO 2.02 code. Some additional changes have also been made to make
+ it work in kernel space.
+
+ Nitin Gupta
+ <[email protected]>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/byteorder.h>
+#include <linux/lzo1x.h>
+
+#include "lzo1x_int.h"
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("LZO1X Decompression");
+
+int
+lzo1x_decompress(const unsigned char *in, size_t in_len,
+ unsigned char *out, size_t *out_len)
+{
+ register size_t t;
+ register unsigned char *op = out;
+ register const unsigned char *ip = in, *m_pos;
+ const unsigned char * const ip_end = in + in_len;
+ unsigned char * const op_end = out + *out_len;
+ *out_len = 0;
+
+ if (*ip > 17) {
+ t = *ip++ - 17;
+ if (t < 4)
+ goto match_next;
+ NEED_OP(t);
+ NEED_IP(t + 1);
+ do
+ *op++ = *ip++;
+ while (--t > 0);
+ goto first_literal_run;
+ }
+
+ while (TEST_IP) {
+ t = *ip++;
+ if (t >= 16)
+ goto match;
+ /* a literal run */
+ if (t == 0) {
+ NEED_IP(1);
+ while (*ip == 0) {
+ t += 255;
+ ip++;
+ NEED_IP(1);
+ }
+ t += 15 + *ip++;
+ }
+ /* copy literals */
+ NEED_OP(t + 3);
+ NEED_IP(t + 4);
+ COPY4(op, ip);
+ op += 4; ip += 4;
+ if (--t > 0) {
+ if (t >= 4) {
+ do {
+ COPY4(op, ip);
+ op += 4; ip += 4; t -= 4;
+ } while (t >= 4);
+ if (t > 0)
+ do
+ *op++ = *ip++;
+ while (--t > 0);
+ }
+ else
+ do
+ *op++ = *ip++;
+ while (--t > 0);
+ }
+
+first_literal_run:
+ t = *ip++;
+ if (t >= 16)
+ goto match;
+ m_pos = op - (1 + M2_MAX_OFFSET);
+ m_pos -= t >> 2;
+ m_pos -= *ip++ << 2;
+ TEST_LB(m_pos);
+ NEED_OP(3);
+ *op++ = *m_pos++;
+ *op++ = *m_pos++;
+ *op++ = *m_pos;
+ goto match_done;
+
+ /* handle matches */
+ do {
+match:
+ if (t >= 64) { /* a M2 match */
+ m_pos = op - 1;
+ m_pos -= (t >> 2) & 7;
+ m_pos -= *ip++ << 3;
+ t = (t >> 5) - 1;
+ TEST_LB(m_pos);
+ NEED_OP(t + 3 - 1);
+ goto copy_match;
+ } else if (t >= 32) { /* a M3 match */
+ t &= 31;
+ if (t == 0) {
+ NEED_IP(1);
+ while (*ip == 0) {
+ t += 255;
+ ip++;
+ NEED_IP(1);
+ }
+ t += 31 + *ip++;
+ }
+ m_pos = op - 1 - (cpu_to_le16(
+ *(const unsigned short *)ip) >> 2);
+ ip += 2;
+ } else if (t >= 16) { /* a M4 match */
+ m_pos = op;
+ m_pos -= (t & 8) << 11;
+ t &= 7;
+ if (t == 0) {
+ NEED_IP(1);
+ while (*ip == 0) {
+ t += 255;
+ ip++;
+ NEED_IP(1);
+ }
+ t += 7 + *ip++;
+ }
+ m_pos -= cpu_to_le16(
+ *(const unsigned short *)ip) >> 2;
+ ip += 2;
+ if (m_pos == op)
+ goto eof_found;
+ m_pos -= 0x4000;
+ } else { /* a M1 match */
+ m_pos = op - 1;
+ m_pos -= t >> 2;
+ m_pos -= *ip++ << 2;
+ TEST_LB(m_pos);
+ NEED_OP(2);
+ *op++ = *m_pos++;
+ *op++ = *m_pos;
+ goto match_done;
+ }
+
+ /* copy match */
+ TEST_LB(m_pos);
+ NEED_OP(t + 3 - 1);
+
+ if (t >= 2 * 4 - (3 - 1) && (op - m_pos) >= 4) {
+ COPY4(op, m_pos);
+ op += 4; m_pos += 4; t -= 4 - (3 - 1);
+ do {
+ COPY4(op, m_pos);
+ op += 4; m_pos += 4; t -= 4;
+ } while (t >= 4);
+ if (t > 0)
+ do *op++ = *m_pos++;
+ while (--t > 0);
+ } else {
+copy_match:
+ *op++ = *m_pos++;
+ *op++ = *m_pos++;
+ do
+ *op++ = *m_pos++;
+ while (--t > 0);
+ }
+
+match_done:
+ t = ip[-2] & 3;
+ if (t == 0)
+ break;
+
+ /* copy literals */
+match_next:
+ NEED_OP(t);
+ NEED_IP(t + 1);
+ *op++ = *ip++;
+ if (t > 1) {
+ *op++ = *ip++;
+ if (t > 2)
+ *op++ = *ip++;
+ }
+ t = *ip++;
+ } while (TEST_IP);
+ }
+
+ /* no EOF code was found */
+ *out_len = (size_t)(op - out);
+ return LZO_E_EOF_NOT_FOUND;
+
+eof_found:
+ *out_len = (size_t)(op - out);
+ return (ip == ip_end ? LZO_E_OK :
+ (ip < ip_end ? LZO_E_INPUT_NOT_CONSUMED :
+ LZO_E_INPUT_OVERRUN));
+
+input_overrun:
+ *out_len = (size_t)(op - out);
+ return LZO_E_INPUT_OVERRUN;
+
+output_overrun:
+ *out_len = (size_t)(op - out);
+ return LZO_E_OUTPUT_OVERRUN;
+
+lookbehind_overrun:
+ *out_len = (size_t)(op - out);
+ return LZO_E_LOOKBEHIND_OVERRUN;
+}
+
+EXPORT_SYMBOL(lzo1x_decompress);
diff --git a/lib/lzo1x/lzo1x_int.h b/lib/lzo1x/lzo1x_int.h
new file mode 100755
index 0000000..4f0fe8d
--- /dev/null
+++ b/lib/lzo1x/lzo1x_int.h
@@ -0,0 +1,85 @@
+/* lzo1x_int.h -- to be used internally by LZO de/compression algorithms
+
+ This file is part of the LZO real-time data compression library.
+
+ Copyright (C) 1996-2005 Markus Franz Xaver Johannes Oberhumer
+ All Rights Reserved.
+
+ The LZO library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ The LZO library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with the LZO library; see the file COPYING.
+ If not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+ Markus F.X.J. Oberhumer
+ <[email protected]>
+ http://www.oberhumer.com/opensource/lzo/
+
+
+ This file was derived from several header files found in original
+ LZO 2.02 code. Some additional changes have also been made to make
+ it work in kernel space.
+
+ Nitin Gupta
+ <[email protected]>
+ */
+
+#ifndef __LZO1X_INT_H
+#define __LZO1X_INT_H
+
+#include <linux/types.h>
+
+#define D_BITS 14
+#define D_SIZE (1u << D_BITS)
+#define D_MASK (D_SIZE - 1)
+#define D_HIGH ((D_MASK >> 1) + 1)
+
+#define DX2(p,s1,s2) \
+ (((((size_t)((p)[2]) << (s2)) ^ (p)[1]) << (s1)) ^ (p)[0])
+#define DX3(p,s1,s2,s3) \
+ ((DX2((p) + 1, s2, s3) << (s1)) ^ (p)[0])
+#define DINDEX1(d,p) \
+ d = ((size_t)(0x21 * DX3(p, 5, 5, 6)) >> 5) & D_MASK
+#define DINDEX2(d,p) \
+ d = (d & (D_MASK & 0x7ff)) ^ (D_HIGH | 0x1f)
+
+#define COPY4(dst,src) *(u32 *)(dst) = *(u32 *)(src)
+
+/* LZO1X Specific constants */
+#define M1_MAX_OFFSET 0x0400
+#define M2_MAX_OFFSET 0x0800
+#define M3_MAX_OFFSET 0x4000
+#define M4_MAX_OFFSET 0xbfff
+
+#define M1_MIN_LEN 2
+#define M1_MAX_LEN 2
+#define M2_MIN_LEN 3
+#define M2_MAX_LEN 8
+#define M3_MIN_LEN 3
+#define M3_MAX_LEN 33
+#define M4_MIN_LEN 3
+#define M4_MAX_LEN 9
+
+#define M1_MARKER 0
+#define M2_MARKER 64
+#define M3_MARKER 32
+#define M4_MARKER 16
+
+/* Bounds checking */
+#define TEST_IP (ip < ip_end)
+#define NEED_IP(x) \
+ if ((size_t)(ip_end - ip) < (size_t)(x)) goto input_overrun
+#define NEED_OP(x) \
+ if ((size_t)(op_end - op) < (size_t)(x)) goto output_overrun
+#define TEST_LB(m_pos) \
+ if (m_pos < out || m_pos >= op) goto lookbehind_overrun
+
+#endif
