Michel Dänzer wrote:
Does the patch below against the drm tree fix it? Only build tested.
yes, now glxinfo/glxgears returns without this badness, DRI is still working fine. I've attached some details. Thank you! Christian.
---From f0e6bdc165cb484b8992b14172a7280f301bf513 Mon Sep 17 00:00:00 2001From: =?utf-8?q?Michel_D=C3=A4nzer?= <[email protected]> Date: Fri, 25 May 2007 11:02:05 +0200 Subject: Make sure the drawable code doesn't call malloc(0).
Attachment:
config_2.6.22-rc2-git7.gz
Description: GNU Zip compressed data
[ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 768MB; using 2048kB for hash table (at cfe00000) [ 0.000000] Linux version 2.6.22-rc2-git7 (dummy@foobar-g4) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #1 PREEMPT Mon May 28 14:09:13 CEST 2007 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 [ 0.000000] Mapped at 0xfdfc0000 [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000 [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: iBook G4 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] Entering add_active_range(0, 0, 196608) 0 entries of 256 used [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=330, gen1=329 [ 0.000000] nvram: Active bank is: 0 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x30000000, Total RAM: 0x30000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 196608 [ 0.000000] Normal 196608 -> 196608 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 196608 [ 0.000000] On node 0 totalpages: 196608 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 195072 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Built 1 zonelists. Total pages: 195072 [ 0.000000] Kernel command line: root=/dev/hda6 ro panic=10 [email protected]/eth0,[email protected]/00:11:09:EA:13:63 [ 0.000000] netconsole: local port 6665 [ 0.000000] netconsole: local IP 192.168.10.29 [ 0.000000] netconsole: interface eth0 [ 0.000000] netconsole: remote port 6666 [ 0.000000] netconsole: remote IP 192.168.10.10 [ 0.000000] netconsole: remote ethernet address 00:11:09:ea:13:63 [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off [ 0.000000] time_init: decrementer frequency = 18.432000 MHz [ 0.000000] time_init: processor frequency = 1199.999997 MHz [ 20.112686] Console: colour dummy device 80x25 [ 20.113127] console handover: boot [udbg0] -> real [tty0] [ 20.113613] ------------------------ [ 20.113624] | Locking API testsuite: [ 20.113632] ---------------------------------------------------------------------------- [ 20.113645] | spin |wlock |rlock |mutex | wsem | rsem | [ 20.113658] -------------------------------------------------------------------------- [ 20.113676] A-A deadlock:failed|failed| ok |failed|failed|failed| [ 20.113723] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| [ 20.113767] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| [ 20.113809] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| [ 20.113853] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 20.113899] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 20.113945] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 20.113991] double unlock: ok | ok |failed| ok |failed|failed| [ 20.114030] initialize held:failed|failed|failed|failed|failed|failed| [ 20.114077] bad unlock order: ok | ok | ok | ok | ok | ok | [ 20.114124] -------------------------------------------------------------------------- [ 20.114147] recursive read-lock: | ok | |failed| [ 20.114181] recursive read-lock #2: | ok | |failed| [ 20.114215] mixed read-write-lock: |failed| |failed| [ 20.114250] mixed write-read-lock: |failed| |failed| [ 20.114284] -------------------------------------------------------------------------- [ 20.114307] hard-irqs-on + irq-safe-A/12:failed|failed| ok | [ 20.114336] soft-irqs-on + irq-safe-A/12:failed|failed| ok | [ 20.114366] hard-irqs-on + irq-safe-A/21:failed|failed| ok | [ 20.114395] soft-irqs-on + irq-safe-A/21:failed|failed| ok | [ 20.114429] sirq-safe-A => hirqs-on/12:failed|failed| ok | [ 20.114459] sirq-safe-A => hirqs-on/21:failed|failed| ok | [ 20.114487] hard-safe-A + irqs-on/12:failed|failed| ok | [ 20.114517] soft-safe-A + irqs-on/12:failed|failed| ok | [ 20.114547] hard-safe-A + irqs-on/21:failed|failed| ok | [ 20.114576] soft-safe-A + irqs-on/21:failed|failed| ok | [ 20.114604] hard-safe-A + unsafe-B #1/123:failed|failed| ok | [ 20.114634] soft-safe-A + unsafe-B #1/123:failed|failed| ok | [ 20.114665] hard-safe-A + unsafe-B #1/132:failed|failed| ok | [ 20.114695] soft-safe-A + unsafe-B #1/132:failed|failed| ok | [ 20.114725] hard-safe-A + unsafe-B #1/213:failed|failed| ok | [ 20.114755] soft-safe-A + unsafe-B #1/213:failed|failed| ok | [ 20.114785] hard-safe-A + unsafe-B #1/231:failed|failed| ok | [ 20.114816] soft-safe-A + unsafe-B #1/231:failed|failed| ok | [ 20.114846] hard-safe-A + unsafe-B #1/312:failed|failed| ok | [ 20.114876] soft-safe-A + unsafe-B #1/312:failed|failed| ok | [ 20.114906] hard-safe-A + unsafe-B #1/321:failed|failed| ok | [ 20.114936] soft-safe-A + unsafe-B #1/321:failed|failed| ok | [ 20.114965] hard-safe-A + unsafe-B #2/123:failed|failed| ok | [ 20.114996] soft-safe-A + unsafe-B #2/123:failed|failed| ok | [ 20.115026] hard-safe-A + unsafe-B #2/132:failed|failed| ok | [ 20.115057] soft-safe-A + unsafe-B #2/132:failed|failed| ok | [ 20.115087] hard-safe-A + unsafe-B #2/213:failed|failed| ok | [ 20.115117] soft-safe-A + unsafe-B #2/213:failed|failed| ok | [ 20.115147] hard-safe-A + unsafe-B #2/231:failed|failed| ok | [ 20.115178] soft-safe-A + unsafe-B #2/231:failed|failed| ok | [ 20.115208] hard-safe-A + unsafe-B #2/312:failed|failed| ok | [ 20.115238] soft-safe-A + unsafe-B #2/312:failed|failed| ok | [ 20.115268] hard-safe-A + unsafe-B #2/321:failed|failed| ok | [ 20.115298] soft-safe-A + unsafe-B #2/321:failed|failed| ok | [ 20.115328] hard-irq lock-inversion/123:failed|failed| ok | [ 20.115359] soft-irq lock-inversion/123:failed|failed| ok | [ 20.115389] hard-irq lock-inversion/132:failed|failed| ok | [ 20.115424] soft-irq lock-inversion/132:failed|failed| ok | [ 20.115454] hard-irq lock-inversion/213:failed|failed| ok | [ 20.115485] soft-irq lock-inversion/213:failed|failed| ok | [ 20.115515] hard-irq lock-inversion/231:failed|failed| ok | [ 20.115545] soft-irq lock-inversion/231:failed|failed| ok | [ 20.115575] hard-irq lock-inversion/312:failed|failed| ok | [ 20.115605] soft-irq lock-inversion/312:failed|failed| ok | [ 20.115635] hard-irq lock-inversion/321:failed|failed| ok | [ 20.115665] soft-irq lock-inversion/321:failed|failed| ok | [ 20.115695] hard-irq read-recursion/123: ok | [ 20.115716] soft-irq read-recursion/123: ok | [ 20.115736] hard-irq read-recursion/132: ok | [ 20.115756] soft-irq read-recursion/132: ok | [ 20.115776] hard-irq read-recursion/213: ok | [ 20.115796] soft-irq read-recursion/213: ok | [ 20.115817] hard-irq read-recursion/231: ok | [ 20.115837] soft-irq read-recursion/231: ok | [ 20.115857] hard-irq read-recursion/312: ok | [ 20.115877] soft-irq read-recursion/312: ok | [ 20.115897] hard-irq read-recursion/321: ok | [ 20.115917] soft-irq read-recursion/321: ok | [ 20.115937] -------------------------------------------------------- [ 20.115954] 142 out of 218 testcases failed, as expected. | [ 20.115969] ---------------------------------------------------- [ 20.117123] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 20.118716] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 20.168329] Memory: 772096k/786432k available (4020k kernel code, 13828k reserved, 164k data, 213k bss, 168k init) [ 20.168473] SLUB: Genslabs=23, HWalign=32, Order=0-1, MinObjects=4, Processors=1, Nodes=1 [ 20.168499] Calibrating delay loop... 36.73 BogoMIPS (lpj=18368) [ 20.184482] Mount-cache hash table entries: 512 [ 20.184976] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" [ 20.188849] NET: Registered protocol family 16 [ 20.189870] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 20.189898] channel 0 bus <multibus> [ 20.189912] channel 1 bus <multibus> [ 20.189975] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 20.189994] channel 0 bus <multibus> [ 20.190028] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 20.190044] channel 1 bus <multibus> [ 20.190057] channel 2 bus <multibus> [ 20.190185] PCI: Probing PCI hardware [ 20.194055] PCI: Cannot allocate resource region 0 of device 0001:10:18.0 [ 20.194085] PCI: Cannot allocate resource region 0 of device 0001:10:19.0 [ 20.194133] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 20.194154] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 20.196972] usbcore: registered new interface driver usbfs [ 20.197106] usbcore: registered new interface driver hub [ 20.197249] usbcore: registered new device driver usb [ 20.198478] NET: Registered protocol family 2 [ 20.207464] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 20.207875] TCP established hash table entries: 131072 (order: 9, 2621440 bytes) [ 20.218321] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) [ 20.224583] TCP: Hash tables configured (established 131072 bind 65536) [ 20.224614] TCP reno registered [ 20.228134] Registering PowerMac CPU frequency driver [ 20.228169] Low: 599 Mhz, High: 1199 Mhz, Boot: 599 Mhz [ 20.229596] Initializing RT-Tester: OK [ 20.238921] io scheduler noop registered [ 20.238952] io scheduler anticipatory registered [ 20.238967] io scheduler deadline registered [ 20.239029] io scheduler cfq registered (default) [ 20.239430] PCI: Enabling device 0000:00:10.0 (0006 -> 0007) [ 20.435263] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55 [ 20.435279] radeonfb: Retrieved PLL infos from Open Firmware [ 20.435301] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz [ 20.435325] radeonfb: PLL min 12000 max 35000 [ 20.512140] i2c-adapter i2c-2: unable to read EDID block. [ 20.631133] i2c-adapter i2c-2: unable to read EDID block. [ 20.750133] i2c-adapter i2c-2: unable to read EDID block. [ 20.869134] i2c-adapter i2c-3: unable to read EDID block. [ 20.988133] i2c-adapter i2c-3: unable to read EDID block. [ 21.107133] i2c-adapter i2c-3: unable to read EDID block. [ 21.150390] radeonfb: Monitor 1 type LCD found [ 21.150407] radeonfb: EDID probed [ 21.150420] radeonfb: Monitor 2 type no found [ 21.150445] radeonfb: Using Firmware dividers 0x000600ad from PPLL 0 [ 21.262401] radeonfb: Dynamic Clock Power Management enabled [ 21.285257] Console: switching to colour frame buffer device 128x48 [ 21.300935] radeonfb: Backlight initialized (radeonbl0) [ 21.301126] radeonfb (0000:00:10.0): ATI Radeon \c [ 21.308928] Generic RTC Driver v1.07 [ 21.309202] Macintosh non-volatile memory driver v1.1 [ 21.309560] Linux agpgart interface v0.102 (c) Dave Jones [ 21.309849] agpgart: Detected Apple UniNorth 2 chipset [ 21.310209] agpgart: configuring for size idx: 8 [ 21.310549] agpgart: AGP aperture is 32M @ 0x0 [ 21.310830] [drm] Initialized drm 1.1.0 20060810 [ 21.311301] [drm] Initialized radeon 1.27.0 20060524 on minor 0 [ 21.311703] sungem.c:v0.98 8/24/03 David S. Miller ([email protected]) [ 21.373753] PHY ID: 4061e4, addr: 0 [ 21.374617] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:c9:95:ca [ 21.374998] eth0: Found BCM5221 PHY [ 21.375389] netconsole: device eth0 not up yet, forcing it [ 25.385401] netconsole: timeout waiting for carrier [ 26.267462] netconsole: network logging started [ 26.273219] MacIO PCI driver attached to Intrepid chipset [ 26.281384] adb: starting probe task... [ 26.287984] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 26.293556] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 26.299514] PCI: Enabling device 0002:20:0d.0 (0000 -> 0002) [ 26.549822] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f [ 26.556604] ADB keyboard at 2, handler 1 [ 26.562184] Detected ADB keyboard, type ISO, swapping keys. [ 26.568016] input: ADB keyboard as /class/input/input0 [ 26.573861] input: ADB Powerbook buttons as /class/input/input1 [ 26.594894] ADB mouse at 3, handler set to 4 (trackpad) [ 26.660257] input: ADB mouse as /class/input/input2 [ 26.666116] adb: finished probe task... [ 27.316407] ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39 [ 27.322355] Probing IDE interface ide0... [ 27.585597] hda: TOSHIBA MK6025GAS, ATA DISK drive [ 28.203415] hda: Enabling Ultra DMA 5 [ 28.210233] ide0 at 0xf101a000-0xf101a007,0xf101a160 on irq 39 [ 29.227406] ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24 [ 29.233452] Probing IDE interface ide1... [ 29.598600] hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive [ 29.910409] hdc: Enabling MultiWord DMA 2 [ 29.917692] ide1 at 0xf1006000-0xf1006007,0xf1006160 on irq 24 [ 29.924406] hda: max request size: 512KiB [ 30.167046] hda: 117210240 sectors (60011 MB), CHS=16383/255/63, UDMA(100) [ 30.173845] hda: cache flushes supported [ 30.180594] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 [ 30.496026] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA [ 30.503081] Uniform CD-ROM driver Revision: 3.20 [ 30.512029] PCI: Enabling device 0001:10:1b.2 (0004 -> 0006) [ 30.518908] ehci_hcd 0001:10:1b.2: EHCI Host Controller [ 30.525952] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1 [ 30.553421] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000 [ 30.560354] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 30.567774] usb usb1: configuration #1 chosen from 1 choice [ 30.574943] hub 1-0:1.0: USB hub found [ 30.581958] hub 1-0:1.0: 5 ports detected [ 30.689671] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 30.689862] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 30.696967] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 30.703968] PCI: Enabling device 0001:10:1a.0 (0000 -> 0002) [ 30.710948] ohci_hcd 0001:10:1a.0: OHCI Host Controller [ 30.717977] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2 [ 30.724961] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000 [ 30.802300] usb usb2: configuration #1 chosen from 1 choice [ 30.809353] hub 2-0:1.0: USB hub found [ 30.816286] hub 2-0:1.0: 2 ports detected [ 30.923635] PCI: Enabling device 0001:10:1b.0 (0000 -> 0002) [ 30.930562] ohci_hcd 0001:10:1b.0: OHCI Host Controller [ 30.937557] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3 [ 30.944447] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000 [ 31.021265] usb usb3: configuration #1 chosen from 1 choice [ 31.028141] hub 3-0:1.0: USB hub found [ 31.034868] hub 3-0:1.0: 3 ports detected [ 31.142614] PCI: Enabling device 0001:10:1b.1 (0000 -> 0002) [ 31.149326] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 31.156147] ohci_hcd 0001:10:1b.1: OHCI Host Controller [ 31.163055] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4 [ 31.169956] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000 [ 31.247264] usb usb4: configuration #1 chosen from 1 choice [ 31.254114] hub 4-0:1.0: USB hub found [ 31.260806] hub 4-0:1.0: 2 ports detected [ 31.337685] usb 2-1: configuration #1 chosen from 1 choice [ 31.368758] mice: PS/2 mouse device common for all mice [ 31.522392] input: HID 05ac:1000 as /class/input/input3 [ 31.528999] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1 [ 31.554294] input: HID 05ac:1000 as /class/input/input4 [ 31.561014] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1 [ 31.732409] usb 4-1: new low speed USB device using ohci_hcd and address 2 [ 31.886756] usb 4-1: configuration #1 chosen from 1 choice [ 31.902284] input: Genius Optical Mouse as /class/input/input5 [ 31.909055] input: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0001:10:1b.1-1 [ 31.915854] usbcore: registered new interface driver usbhid [ 31.922565] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 31.929315] oprofile: using ppc/7450 performance monitoring. [ 31.929614] TCP cubic registered [ 31.936299] Initializing XFRM netlink socket [ 31.943188] NET: Registered protocol family 1 [ 31.950413] NET: Registered protocol family 10 [ 31.957092] lo: Disabled Privacy Extensions [ 31.963595] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.970230] IPv6 over IPv4 tunneling driver [ 31.976990] sit0: Disabled Privacy Extensions [ 31.983581] NET: Registered protocol family 17 [ 31.990107] NET: Registered protocol family 15 [ 32.051519] input: PMU as /class/input/input6 [ 32.058042] Registered led device: pmu-front-led [ 32.093591] kjournald starting. Commit interval 5 seconds [ 32.100193] EXT3-fs: mounted filesystem with ordered data mode. [ 32.106645] VFS: Mounted root (ext3 filesystem) readonly. [ 32.113219] Freeing unused kernel memory: 168k init [ 44.882347] ieee80211_crypt: registered algorithm 'NULL' [ 45.052795] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 45.068922] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]> [ 45.693150] bcm43xx driver [ 45.701699] PCI: Enabling device 0001:10:12.0 (0004 -> 0006) [ 45.779626] PCI: Enabling device 0002:20:0e.0 (0000 -> 0002) [ 45.844466] fw_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.10 [ 46.352726] fw_core: created new fw device fw0 (0 config rom retries) [ 51.090071] PowerMac i2c bus pmu 2 registered [ 51.108033] PowerMac i2c bus pmu 1 registered [ 51.115942] PowerMac i2c bus mac-io 0 registered [ 51.123611] PowerMac i2c bus uni-n 1 registered [ 51.131221] PowerMac i2c bus uni-n 0 registered [ 51.609602] input: PowerMac Beep as /class/input/input7 [ 51.829518] SCSI subsystem initialized [ 57.617343] adt746x: version 1 (supported) [ 57.624907] adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1 [ 57.632764] sensor 0: PWR/MEMORY BOTTOMSIDE [ 57.640511] sensor 1: CPU BOTTOMSIDE [ 57.648206] sensor 2: GPU BOTTOMSIDE [ 57.668252] adt746x: ADT7467 initializing [ 57.678429] adt746x: Lowering max temperatures from 69, 92, 101 to 70, 50, 70 [ 57.894833] Adding 819192k swap on /dev/hda5. Priority:0 extents:1 across:819192k [ 58.158841] EXT3 FS on hda6, internal journal [ 65.255576] process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT [ 78.443062] agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode [ 78.443086] agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [ 78.775069] [drm] Setting GART location based on new memory map [ 78.775510] [drm] Loading R200 Microcode [ 78.775597] [drm] writeback test succeeded in 1 usecs [ 214.096849] hfs: write access to a jounaled filesystem is not supported, use the force option at your own risk, mounting read-only.
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
OpenGL vendor string: Tungsten Graphics, Inc.
OpenGL renderer string: Mesa DRI R200 20060602 AGP 8x TCL
OpenGL version string: 1.3 Mesa 6.5.2
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_buffer_object,
GL_ARB_vertex_program, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_equation_separate,
GL_EXT_blend_func_separate, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_clip_volume_hint, GL_EXT_compiled_vertex_array, GL_EXT_convolution,
GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_histogram, GL_EXT_packed_pixels, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
GL_APPLE_packed_pixels, GL_ATI_blend_equation_separate,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_ATI_fragment_shader, GL_IBM_rasterpos_clip,
GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate,
GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_MESA_window_pos,
GL_NV_blend_square, GL_NV_light_max_exponent, GL_NV_texture_rectangle,
GL_NV_texgen_reflection, GL_OES_read_format, GL_SGI_color_matrix,
GL_SGI_color_table, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x24 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x26 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x27 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x28 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x29 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2a 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x2b 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x2c 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x2d 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2e 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x2f 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x30 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x31 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x32 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x4b 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 Ncon
- References:
- Badness at include/linux/slub_def.h
- From: Christian Kujau <[email protected]>
- Re: Badness at include/linux/slub_def.h
- From: Michel Dänzer <[email protected]>
- Badness at include/linux/slub_def.h
- Prev by Date: [PATCH] RTC: Use fallback IRQ if PNP tables don't provide one
- Next by Date: Re: [RFC][PATCH -mm 3/3] PM: Disable _request_firmware before hibernation/suspend
- Previous by thread: Re: Badness at include/linux/slub_def.h
- Next by thread: [PATCH] rm_inter-arch Kconfig dep. (was Re: building i386 requires s390: "driver/crypto/Kconfig" sourcing s390 arch)
- Index(es):
 |