On 5/24/07, Markus Rechberger <[email protected]> wrote:
> Hi Jiri,
>
> On 5/24/07, Jiri Slaby <[email protected]> wrote:
> > Well, no objections on v4l list, try to merge it. Any further comments
will
> > be
> > appreciated.
> >
> > --
> >
> > stk11xx, add a new webcam driver
> >
> > Cc: Mauro Carvalho Chehab <[email protected]>
> > Signed-off-by: Jiri Slaby <[email protected]>
> >
[...]
> > +/*
> > + * Bayer conversion
> > + */
> > +
> > +#define STK11XX_AVG2(x,y) (u8)(((int)x + (int)y) / 2)
> > +#define STK11XX_AVG4(a,b,c,d) (u8)(((int)a + (int)b + (int)c + (int)d)
/ 4)
> > +
> > +static void stk11xx_bayer_to_rgb(u8 *rgb, const u8 *bayer,
> > + const int width, const int height)
>
> hmm.. this is probably to support xawtv/tvtime?
> It would be better to do that in userspace, but the argument which
> seems to be against it is that userspace applications often don't
> support bayer.
Exactly. This would make the webcam driver unusable. Another one,
which awaits RGB is camstream, which also I use. After moving all
major used userspace apps to something like pwlib, this may be wiped
out.
> > +{
> > + unsigned int x, y, nwidth, nheight;
> > +
> > + nheight = height / factor;
> > + nwidth = width / factor;
> > +
> > + for (y = 0; y < nheight; y++) {
> > + for (x = 0; x < nwidth; x++) {
> > + /* R */
> > + out[y * nwidth * 3 + x * 3 + 0] =
> > + in[y * factor * width * 3 + x * factor * 3 +
0];
> > + /* G */
> > + out[y * nwidth * 3 + x * 3 + 1] =
> > + in[y * factor * width * 3 + x * factor * 3 +
1];
> > + /* B */
> > + out[y * nwidth * 3 + x * 3 + 2] =
> > + in[y * factor * width * 3 + x * factor * 3 +
2];
> > + }
> > + }
> > +}
> > +
> > +static void stk11xx_correct_brightness(u8 *rgb, unsigned int width,
> > + unsigned int height, int brightness)
> > +{
>
> same here, why do you want to have that in kernelspace?
not sure who from userspace can do this nowadays. Will check.
> > +/*
> > + * The configuration of device is composed of 12 steps.
> > + * This function is called by the initialization process.
> > + *
> > + * We don't know the meaning of these steps! We only replay the USB
log.
> > + */
> > +static int stk1135_configure_device(struct stk11xx *dev, int step)
> > +{
> > + int value;
> > +
> > + /* 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
> > + 10, 11, 12, 13 */
> > +
> > + const u8 values_001B[] = {
> > + 0x0E, 0x03, 0x0E, 0x0E, 0x0E, 0x0E, 0x0E, 0x0E, 0x0E,
0x07,
> > + 0x07, 0x07, 0x07, 0x07
> > + };
> > + const u8 values_001C[] = {
> > + 0x06, 0x02, 0x46, 0x46, 0x46, 0x46, 0x46, 0x46, 0x06,
0x06,
> > + 0x06, 0x06, 0x06, 0x07
> > + };
> > + const u8 values_0202[] = {
> > + 0x1E, 0x0A, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E,
0x1E,
> > + 0x1E, 0x1E, 0x1E, 0x1E
> > + };
> > + const u8 values_0110[] = {
> > + 0x07, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x3E, 0x00, 0x04,
0x00,
> > + 0x00, 0x00, 0x00, 0x00
> > + };
> > + const u8 values_0112[] = {
> > + 0x07, 0x00, 0x00, 0x00, 0x00, 0x09, 0x09, 0x00, 0x04,
0x00,
> > + 0x00, 0x00, 0x00, 0x00
> > + };
> > + const u8 values_0114[] = {
> > + 0x87, 0x80, 0x80, 0x80, 0x80, 0xBE, 0xBE, 0x80, 0x84,
0x80,
> > + 0x80, 0x80, 0x80, 0x80
> > + };
> > + const u8 values_0116[] = {
> > + 0xE7, 0xE0, 0xE0, 0xE0, 0xE0, 0xE9, 0xE9, 0xE0, 0xE4,
0xE0,
> > + 0xE0, 0xE0, 0xE0, 0xE0
> > + };
> > + const u8 values_0100[] = {
> > + 0x20, 0x21, 0x21, 0x21, 0x21, 0x21, 0x21, 0x21, 0x23,
0x20,
> > + 0x20, 0x20, 0x20, 0x20
> > + };
> > +
> > + dev_dbg(&dev->udev->dev, "stk1135_configure_device: %d\n", step);
> > +
> > + stk11xx_write_registry(dev, 0x0000, 0x0024);
> > + stk11xx_write_registry(dev, 0x0002, 0x0068);
> > + stk11xx_write_registry(dev, 0x0003, 0x0080);
> > + stk11xx_write_registry(dev, 0x0005, 0x0000);
> > +
> > + stk11xx_write_registry(dev, 0x0007, 0x0003);
> > + stk11xx_write_registry(dev, 0x000d, 0x0000);
> > + stk11xx_write_registry(dev, 0x000f, 0x0002);
> > + stk11xx_write_registry(dev, 0x0300, 0x0012);
> > + stk11xx_write_registry(dev, 0x0350, 0x0041);
> > +
> > + stk11xx_write_registry(dev, 0x0351, 0x0000);
> > + stk11xx_write_registry(dev, 0x0352, 0x0000);
> > + stk11xx_write_registry(dev, 0x0353, 0x0000);
> > + stk11xx_write_registry(dev, 0x0018, 0x0010);
> > + stk11xx_write_registry(dev, 0x0019, 0x0000);
> > +
> > + stk11xx_write_registry(dev, 0x001b, values_001B[step]);
> > + stk11xx_write_registry(dev, 0x001c, values_001C[step]);
> > + stk11xx_write_registry(dev, 0x0300, 0x0080);
> > + stk11xx_write_registry(dev, 0x001a, 0x0004);
> > + stk11xx_write_registry(dev, 0x0202, values_0202[step]);
> > +
> > + stk11xx_write_registry(dev, 0x0110, values_0110[step]);
> > + stk11xx_write_registry(dev, 0x0111, 0x0000);
> > + stk11xx_write_registry(dev, 0x0112, values_0112[step]);
> > + stk11xx_write_registry(dev, 0x0113, 0x0000);
> > + stk11xx_write_registry(dev, 0x0114, values_0114[step]);
> > +
>
> if possible some error checking would be nice here, if you unplug the
> device you'll rely on the underlying subsystem to handle your errors I
> don't think that's a good way to go.
> Did you test unplugging your device while it's in use with
mplayer/xawtv/..?
hmm, no. It's physically impossible -- it's built in. Is there any
possibility of sw unplugging, e.g. writing something somewhere to
/proc or /sys?
