On 2007.05.26 14:42:30 +0200, Maximilian Engelhardt wrote:
> Hello,
>
> when using the prism54 driver including in the 2.6.22-rc3 kernel I get this
> Oops when putting the card into monitor mode:
>
> BUG: unable to handle kernel NULL pointer dereference at virtual address
> 000001d8
> printing eip:
> c0500608
> *pde = 00000000
> Oops: 0002 [#1]
> PREEMPT
> Modules linked in: fuse
> CPU: 0
> EIP: 0060:[<c0500608>] Not tainted VLI
> EFLAGS: 00010046 (2.6.22-rc3 #2)
> EIP is at netif_rx+0x48/0xc0
> eax: 00000000 ebx: c18fdbc0 ecx: c087991c edx: c0879910
> esi: 00000246 edi: f7c68010 ebp: f7fe0ba0 esp: c07bbef0
> ds: 007b es: 007b fs: 0000 gs: 0000 ss: 0068
> Process swapper (pid: 0, ti=c07ba000 task=c075a280 task.ti=c07ba000)
> Stack: f7ec0000 00000000 c03d2b8f c07bbf24 00000082 f7c68024 f7fe0800 c18fdbc0
> 00000070 00000046 00000286 00000286 00000008 00000007 0032dcd5 00000000
> f7fe0ba0 00000002 f7fe0800 c03d913d 00000000 00000000 f7f4d2c0 00000000
> Call Trace:
> [<c03d2b8f>] islpci_eth_receive+0x12f/0x590
> [<c03d913d>] islpci_interrupt+0x1cd/0x280
> [<c0144e15>] handle_IRQ_event+0x25/0x50
> [<c014669c>] handle_fasteoi_irq+0x5c/0xe0
> [<c010674a>] do_IRQ+0x4a/0x80
> [<c010498f>] common_interrupt+0x23/0x28
> [<c0102b3a>] default_idle+0x2a/0x40
> [<c01023e3>] cpu_idle+0x43/0x80
> [<c07bcb2a>] start_kernel+0x21a/0x260
> [<c07bc450>] unknown_bootoption+0x0/0x260
> =======================
> Code: c7 43 0c 00 00 00 00 c7 43 10 00 00 00 00 9c 5e fa ff 05 bc 9c 87 c0 a1
> 0c 99 87 c0 3b 05 c0 4a 7b c0 77 30 85 c0 74 43 8b 43 14 <ff> 80 d8 01 00 00
> a1 08 99 87 c0 ff 05 0c 99 87 c0 c7 03 04 99
> EIP: [<c0500608>] netif_rx+0x48/0xc0 SS:ESP 0068:c07bbef0
> Kernel panic - not syncing: Fatal exception in interrupt
>
> After this the system is frozen. Using kernel 2.6.21 everything works fine, I
> can capture packets in monitor mode and do not get any Oops.
That's probably due to commit 4c13eb6657fe9ef7b4dc8f1a405c902e9e5234e0,
which moved the setting of skb->dev into eth_type_trans, which is never
called when the card is in monitor mode.
Could you try this patch?
Manually set the device of a skb for prism54 cards that are in monitor
mode as we never call eth_type_trans in that case.
Signed-off-by: Björn Steinbrink <[email protected]>
---
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index dd070cc..f49eb06 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -378,9 +378,10 @@ islpci_eth_receive(islpci_private *priv)
display_buffer((char *) skb->data, skb->len);
#endif
/* take care of monitor mode and spy monitoring. */
- if (unlikely(priv->iw_mode == IW_MODE_MONITOR))
+ if (unlikely(priv->iw_mode == IW_MODE_MONITOR)) {
+ skb->dev = ndev;
discard = islpci_monitor_rx(priv, &skb);
- else {
+ } else {
if (unlikely(skb->data[2 * ETH_ALEN] == 0)) {
/* The packet has a rx_annex. Read it for spy monitoring, Then
* remove it, while keeping the 2 leading MAC addr.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]