Hi,
2007/5/26, Linus Torvalds <[email protected]>:
What more could you possibly want? Some ATA updates? USB suspend problem
22-rc3 broke the CDROM in my Dell notebook. After I've switched to
libata som time ago, I've got some delays/timeouts during boot [1].
But the drive works as expected. With 2.6.22-rc3 I've got the
following messages during bootup:
[ 19.343211] ata_piix 0000:00:07.1: version 2.11
[ 19.343598] scsi0 : ata_piix
[ 19.344068] scsi1 : ata_piix
[ 19.344426] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6
bmdma 0x00010860 irq 14
[ 19.345135] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376
bmdma 0x00010868 irq 15
[ 0.653333] Marking TSC unstable due to: possible TSC halt in C2.
[ 0.656666] Time: acpi_pm clocksource has been installed.
[ 0.656666] Switched to NOHz mode on CPU #0
[ 0.779999] ata1.00: ata_hpa_resize 1: sectors = 78242976,
hpa_sectors = 78242976
[ 0.779999] ata1.00: ATA-7: SAMSUNG MP0402H, UC100-14, max UDMA/100
[ 0.796666] ata1.00: 78242976 sectors, multi 8: LBA48
[ 0.816666] ata1.00: ata_hpa_resize 1: sectors = 78242976,
hpa_sectors = 78242976
[ 0.829999] ata1.00: configured for UDMA/33
[ 1.376666] Clocksource tsc unstable (delta = -496149826 ns)
[ 10.866665] ata2: SRST failed (errno=-16)
[ 20.899997] ata2: SRST failed (errno=-16)
[ 55.946661] ata2: SRST failed (errno=-16)
[ 60.966660] ata2: SRST failed (errno=-16)
[ 60.979993] ata2: reset failed, giving up
[ 60.993327] scsi 0:0:0:0: Direct-Access ATA SAMSUNG
MP0402H UC10 PQ: 0 ANSI: 5
[ 61.009993] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[ 61.023327] sd 0:0:0:0: [sda] Write Protect is off
[ 61.039993] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 61.039993] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 61.056660] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[ 61.069993] sd 0:0:0:0: [sda] Write Protect is off
[ 61.086660] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 61.086660] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 61.103327] sda: sda1 sda2 sda3 sda4
[ 61.546660] sd 0:0:0:0: [sda] Attached SCSI disk
[ 61.563327] sd 0:0:0:0: Attached scsi generic sg0 type 0
AFAIR the drive, a SAMSUNG CD-ROM SN-124, is somehow misbehaving and
listed with ATA_HORKAGE_NODMA in the dma blacklist.
Is there a patch I can apply?
Thanks,
Gregor
[1] http://lkml.org/lkml/2007/3/1/243
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]