Re: [PATCH, RFT, v4] sata_mv: convert to new EH

[Jeff Garzik <jeff@garzik.org>]

Dave Dillow wrote:
> On Sat, 2007-05-26 at 16:56 -0400, Jeff Garzik wrote:
> > Dave, any chance you could try 2.6.22-rc3 + my v4 patch, on a different 
> > hard drive?  Preferably a non-Maxtor, or at least not another Maxtor 
> > 6L200S0.  If that's a big deal, don't worry about it.  I just want to 
> > rule out buggy firmware and/or bad hard drive in your case.
>
> It is likely I can come up with at least one, and maybe two if I
> cannibalize my main machine... do you want results under all three
> kernels or just the v4 patch?

Mainly the v4 patch, but an it-works test on 2.6.22-rc3 just for 
sanity's sake would be useful as well.

If you have time, check both new and old drives with SMART
	smartctl -d ata -t long /dev/blahblah

to make sure the extended tests don't find anything wrong.  Extended 
tests usually take 30-90 minutes.  You can access the hard drive while 
the extended test is running, but I/O will be slower for obvious reasons.

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/