Better DPLL use and calibration
Signed-off-by: Alan Cox <[email protected]>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.22-rc2-mm1/drivers/ata/pata_hpt37x.c linux-2.6.22-rc2-mm1/drivers/ata/pata_hpt37x.c
--- linux.vanilla-2.6.22-rc2-mm1/drivers/ata/pata_hpt37x.c 2007-05-25 17:39:06.000000000 +0100
+++ linux-2.6.22-rc2-mm1/drivers/ata/pata_hpt37x.c 2007-05-25 18:20:38.000000000 +0100
@@ -26,7 +26,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.5"
+#define DRV_VERSION "0.6.6"
struct hpt_clock {
u8 xfer_speed;
@@ -931,15 +931,6 @@
.udma_mask = 0x7f,
.port_ops = &hpt372_port_ops
};
- /* HPT371, 372 and friends - UDMA100 at 50MHz clock */
- static const struct ata_port_info info_hpt372_50 = {
- .sht = &hpt37x_sht,
- .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
- .pio_mask = 0x1f,
- .mwdma_mask = 0x07,
- .udma_mask = 0x3f,
- .port_ops = &hpt372_port_ops
- };
/* HPT374 - UDMA133 */
static const struct ata_port_info info_hpt374 = {
.sht = &hpt37x_sht,
@@ -1098,17 +1089,21 @@
* use a 50MHz DPLL by choice
*/
unsigned int f_low, f_high;
- int adjust;
+ int dpll, adjust;
- clock_slot = 2;
+ /* Compute DPLL */
+ dpll = 2;
if (port->udma_mask & 0xE0)
- clock_slot = 3;
+ dpll = 3;
- f_low = (MHz[clock_slot] * chip_table->base) / 192;
+ f_low = (MHz[clock_slot] * 48) / MHz[dpll];
f_high = f_low + 2;
+ if (clock_slot > 1)
+ f_high += 2;
/* Select the DPLL clock. */
pci_write_config_byte(dev, 0x5b, 0x21);
+ pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
for(adjust = 0; adjust < 8; adjust++) {
if (hpt37x_calibrate_dpll(dev))
@@ -1124,12 +1119,12 @@
printk(KERN_WARNING "hpt37x: DPLL did not stabilize.\n");
return -ENODEV;
}
- if (clock_slot == 3)
+ if (dpll == 3)
private_data = (void *)hpt37x_timings_66;
else
private_data = (void *)hpt37x_timings_50;
- printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[clock_slot]);
+ printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[dpll]);
} else {
private_data = (void *)chip_table->clocks[clock_slot];
/*
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
