Re: [PATCH] Chaining sg lists for big IO commands v5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2007-05-24 at 14:05 +0200, Jens Axboe wrote:
> On Thu, May 24 2007, Jens Axboe wrote:
> > > Oops: Kernel access of bad area, sig: 11 [#1]
> > > SMP NR_CPUS=32 NUMA pSeries
> > > Modules linked in: qla2xxx scsi_transport_fc
> > > NIP: c0000000000414a0 LR: c00000000004162c CTR: 0000000000000001
> > > REGS: c0000000047bb130 TRAP: 0300   Not tainted  (2.6.22-rc1)
> > > MSR: 8000000000001032 <ME,IR,DR>  CR: 28000022  XER: 00000008
> > > DAR: 0000000000000000, DSISR: 0000000040000000
> > > TASK = c0000000047a6aa0[0] 'swapper' THREAD: c0000000047b8000 CPU: 7
> > > GPR00: 0000000000000080 c0000000047bb3b0 c000000000692358 c0000000047a6aa0
> > > GPR04: 0000000000000000 0000000000000070 0000000000000000 c0000000005ac0b8
> > > GPR08: 000000000000e4b4 0000000000000001 0000000000000000 0000000000000280
> > > GPR12: 0000000000000020 c0000000005a3e80 0000000000000000 0000000007a8dd70
> > > GPR16: 0000000000000000 0000000000000000 0000000000000000 c0000000047b8000
> > > GPR20: 000000003b9aca00 c0000000047a6c50 0000000000000001 0000000000000000
> > > GPR24: d000000000909048 0001dee6d30c0d30 c000000003b7dd80 c0000000047a6aa0
> > > GPR28: 00000001079027ca c0000000047a6aa0 c0000000005b7cb0 c000000000472c9c
> > > NIP [c0000000000414a0] .dequeue_task+0x0/0x9c
> > > LR [c00000000004162c] .deactivate_task+0x40/0x60
> > > Call Trace:
> > > [c0000000047bb3b0] [c00000000004bccc] .printk+0x38/0x48 (unreliable)
> > > [c0000000047bb440] [c000000000471704] .schedule+0x1fc/0x8dc
> > > [c0000000047bb540] [c000000000472c9c] .schedule_timeout+0xa8/0xe8
> > > [c0000000047bb610] [c000000000057260] .msleep+0x20/0x38
> > > [c0000000047bb690] [c00000000003f5ec] .eeh_dn_check_failure+0x114/0x268
> > > [c0000000047bb740] [c00000000003fc64] .eeh_check_failure+0xec/0x114
> > > [c0000000047bb7c0] [d00000000086190c] .qla2300_fw_dump+0x1130/0x1c00 [qla2xxx]
> > > [c0000000047bb8a0] [d000000000858d50] .qla2300_intr_handler+0x1e8/0x60c [qla2xxx]
> > > [c0000000047bb950] [c000000000078368] .handle_IRQ_event+0x70/0xe4
> > > [c0000000047bb9f0] [c00000000007a7e0] .handle_fasteoi_irq+0x11c/0x1d0
> > > [c0000000047bba90] [c00000000000c178] .do_IRQ+0x90/0xec
> > > [c0000000047bbb10] [c000000000004790] hardware_interrupt_entry+0x18/0x1c
> > 
> > Not good. The qla changes are non-trivial (that hardware has a really
> > funky sg setup), so I may have botched a part of it. I'll review the
> > qla changes and get back to you.
> 
> Does this help?
> 
> diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c

Yes. It does. For now, I have no more complaints :)

Thanks,
Badari



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux