On Mon, 21 May 2007 08:45:49 -0700
Stephen Hemminger <[email protected]> wrote:
> It's almost certainly a problem with the BIOS and hardware (not a
> sky2) driver issue. Since there are many similar boards and
> configurations, I made the decision not to enforce restrictions in
> the driver.
>> May 20 15:57:48 cramit kernel: sky2 0000:04:00.0: v1.14 addr
>> 0xf8000000 irq 16 Yukon-EC Ultra (0xb4) rev 2
Thank you for your answer. I was half wondering if that was the case
after staring at those log messages several more times. I don't
understand hardware at the low level but got thinking maybe interrupt
routing issue. There's an Nvidia PCI Express card in there that gets
IRQ 16, though it was not initialized by a driver at the time. (plain
old VGA console after fresh cold boot... no framebuffer, no X, no
nvidia module). I guess some things don't share well.
It works well in that other OS that came with the hardware, but
that's beside the point.
Mike Houston
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
