Alan Cox wrote:
> On Mon, May 21, 2007 at 01:50:48PM +0200, Tejun Heo wrote:
>>> May 20 23:02:56 localhost kernel: ata3.00: qc timeout (cmd 0xef)
>>> May 20 23:02:56 localhost kernel: ata3.00: failed to set xfermode
>>> (err_mask=0x4)
>> Hmmm... It doesn't like SETXFERMASK either. Please try the attached patch.
>
> The CF 1.1 command list is pretty short. Unfortunately the patch you've
> given below won't itself cure the problem as some of the newer CF cards do
> need SETXFERMASK issuing to do higher PIO modes.
Yeap, it's a debug patch. What I was thinking was adding a HORKAGE for
the device - e.g. ATA_HORKAGE_NO_SETXFERMODE, but product ID "Memory
Card Adapter" doesn't seem too specific.
> The CFA people also didn't put the CFA version in the ident data. What might
> work sanely would be
>
> if (supports_pio == only_pio0 && cfa)
OIC. I don't really know much about these CFA thingies. If the above
should work for most devices, no objection from me.
--
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
