[PATCH 30/32] Blackfin serial driver: fix overhead issue

[Bryan Wu <bryan.wu@analog.com>]

From: Aubrey Li <aubrey.li@analog.com>

Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
---
 drivers/serial/bfin_5xx.c |   28 +++++++++++++++++-----------
 1 files changed, 17 insertions(+), 11 deletions(-)

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 408390f..a8271d9 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -240,24 +240,30 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 		bfin_serial_stop_tx(&uart->port);
 }
 
-static irqreturn_t bfin_serial_int(int irq, void *dev_id)
+static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
+{
+	struct bfin_serial_port *uart = dev_id;
+
+	spin_lock(&uart->port.lock);
+	while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_RX_READY)
+		bfin_serial_rx_chars(uart);
+	spin_unlock(&uart->port.lock);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
 {
 	struct bfin_serial_port *uart = dev_id;
 	unsigned short status;
 
 	spin_lock(&uart->port.lock);
-	status = UART_GET_IIR(uart);
-	do {
-		if ((status & IIR_STATUS) == IIR_TX_READY)
-			bfin_serial_tx_chars(uart);
-		if ((status & IIR_STATUS) == IIR_RX_READY)
-			bfin_serial_rx_chars(uart);
-		status = UART_GET_IIR(uart);
-	} while (status & (IIR_TX_READY | IIR_RX_READY));
+	while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY)
+		bfin_serial_tx_chars(uart);
 	spin_unlock(&uart->port.lock);
 	return IRQ_HANDLED;
 }
 
+
 static void bfin_serial_do_work(struct work_struct *work)
 {
 	struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue);
@@ -545,14 +551,14 @@ static int bfin_serial_startup(struct uart_port *port)
 	add_timer(&(uart->rx_dma_timer));
 #else
 	if (request_irq
-	    (uart->port.irq, bfin_serial_int, IRQF_DISABLED,
+	    (uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
 	     "BFIN_UART_RX", uart)) {
 		printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
 		return -EBUSY;
 	}
 
 	if (request_irq
-	    (uart->port.irq+1, bfin_serial_int, IRQF_DISABLED,
+	    (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
 	     "BFIN_UART_TX", uart)) {
 		printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n");
 		free_irq(uart->port.irq, uart);
-- 
1.5.1.2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/