[PATCH 18/32] Blackfin arch: issue reset via SWRST so we dont clobber the watchdog state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Mike Frysinger <[email protected]>

Signed-off-by: Mike Frysinger <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
---
 arch/blackfin/mach-bf533/head.S |   68 +++++++++-----------------------------
 arch/blackfin/mach-bf537/head.S |   70 +++++++++------------------------------
 arch/blackfin/mach-bf561/head.S |   70 +++++++++------------------------------
 3 files changed, 48 insertions(+), 160 deletions(-)

diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index 7cb8258..1a54ff5 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -481,66 +481,30 @@ ENTRY(_bfin_reset)
 	[p0] = r0;
 	SSYNC;
 
-	/* Disable the WDOG TIMER */
-	p0.h = hi(WDOG_CTL);
-	p0.l = lo(WDOG_CTL);
-	r0.l = 0xAD6;
-	w[p0] = r0.l;
-	SSYNC;
-
-	/* Clear the sticky bit incase it is already set */
-	p0.h = hi(WDOG_CTL);
-	p0.l = lo(WDOG_CTL);
-	r0.l = 0x8AD6;
-	w[p0] = r0.l;
+	/* make sure SYSCR is set to use BMODE */
+	P0.h = hi(SYSCR);
+	P0.l = lo(SYSCR);
+	R0.l = 0x0;
+	W[P0] = R0.l;
 	SSYNC;
 
-	/* Program the count value */
-	R0.l = 0x100;
-	R0.h = 0x0;
-	P0.h = hi(WDOG_CNT);
-	P0.l = lo(WDOG_CNT);
-	[P0] = R0;
+	/* issue a system soft reset */
+	P1.h = hi(SWRST);
+	P1.l = lo(SWRST);
+	R1.l = 0x0007;
+	W[P1] = R1;
 	SSYNC;
 
-	/* Program WDOG_STAT if necessary */
-	P0.h = hi(WDOG_CTL);
-	P0.l = lo(WDOG_CTL);
-	R0 = W[P0](Z);
-	CC = BITTST(R0,1);
-	if !CC JUMP .LWRITESTAT;
-	CC = BITTST(R0,2);
-	if !CC JUMP .LWRITESTAT;
-	JUMP .LSKIP_WRITE;
-
-.LWRITESTAT:
-	/* When watch dog timer is enabled, a write to STAT will load the contents of CNT to STAT */
-	R0 = 0x0000(z);
-	P0.h = hi(WDOG_STAT);
-	P0.l = lo(WDOG_STAT)
-	[P0] = R0;
-	SSYNC;
-
-.LSKIP_WRITE:
-	/* Enable the reset event */
-	P0.h = hi(WDOG_CTL);
-	P0.l = lo(WDOG_CTL);
-	R0 = W[P0](Z);
-	BITCLR(R0,1);
-	BITCLR(R0,2);
-	W[P0] = R0.L;
-	SSYNC;
-	NOP;
-
-	/* Enable the wdog counter */
-	R0 = W[P0](Z);
-	BITCLR(R0,4);
-	W[P0] = R0.L;
+	/* clear system soft reset */
+	R0.l = 0x0000;
+	W[P0] = R0;
 	SSYNC;
 
-	IDLE;
+	/* issue core reset */
+	raise 1;
 
 	RTS;
+ENDPROC(_bfin_reset)
 
 #if CONFIG_DEBUG_KERNEL_START
 debug_kernel_start_trap:
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
index de78e42..aafc686 100644
--- a/arch/blackfin/mach-bf537/head.S
+++ b/arch/blackfin/mach-bf537/head.S
@@ -517,68 +517,30 @@ _delay_lab1_end:
 	[p0] = r0;
 	SSYNC;
 
-	/* Disable the WDOG TIMER */
-	p0.h = hi(WDOG_CTL);
-	p0.l = lo(WDOG_CTL);
-	r0.l = 0xAD6;
-	w[p0] = r0.l;
+	/* make sure SYSCR is set to use BMODE */
+	P0.h = hi(SYSCR);
+	P0.l = lo(SYSCR);
+	R0.l = 0x0;
+	W[P0] = R0.l;
 	SSYNC;
 
-	/* Clear the sticky bit incase it is already set */
-	p0.h = hi(WDOG_CTL);
-	p0.l = lo(WDOG_CTL);
-	r0.l = 0x8AD6;
-	w[p0] = r0.l;
+	/* issue a system soft reset */
+	P1.h = hi(SWRST);
+	P1.l = lo(SWRST);
+	R1.l = 0x0007;
+	W[P1] = R1;
 	SSYNC;
 
-	/* Program the count value */
-	R0.l = 0x100;
-	R0.h = 0x0;
-	P0.h = hi(WDOG_CNT);
-	P0.l = lo(WDOG_CNT);
-	[P0] = R0;
-	SSYNC;
-
-	/* Program WDOG_STAT if necessary */
-	P0.h = hi(WDOG_CTL);
-	P0.l = lo(WDOG_CTL);
-	R0 = W[P0](Z);
-	CC = BITTST(R0,1);
-	if !CC JUMP .LWRITESTAT;
-	CC = BITTST(R0,2);
-	if !CC JUMP .LWRITESTAT;
-	JUMP .LSKIP_WRITE;
-
-.LWRITESTAT:
-	/* When watch dog timer is enabled,
-	 * a write to STAT will load the contents of CNT to STAT
-	 */
-	R0 = 0x0000(z);
-	P0.h = hi(WDOG_STAT);
-	P0.l = lo(WDOG_STAT)
-	[P0] = R0;
-	SSYNC;
-
-.LSKIP_WRITE:
-	/* Enable the reset event */
-	P0.h = hi(WDOG_CTL);
-	P0.l = lo(WDOG_CTL);
-	R0 = W[P0](Z);
-	BITCLR(R0,1);
-	BITCLR(R0,2);
-	W[P0] = R0.L;
-	SSYNC;
-	NOP;
-
-	/* Enable the wdog counter */
-	R0 = W[P0](Z);
-	BITCLR(R0,4);
-	W[P0] = R0.L;
+	/* clear system soft reset */
+	R0.l = 0x0000;
+	W[P0] = R0;
 	SSYNC;
 
-	IDLE;
+	/* issue core reset */
+	raise 1;
 
 	RTS;
+ENDPROC(_bfin_reset)
 
 .data
 
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
index 462c39e..04f3ac3 100644
--- a/arch/blackfin/mach-bf561/head.S
+++ b/arch/blackfin/mach-bf561/head.S
@@ -427,68 +427,30 @@ ENTRY(_bfin_reset)
 	[p0] = r0;
 	SSYNC;
 
-	/* Disable the WDOG TIMER */
-	p0.h = hi(WDOGA_CTL);
-	p0.l = lo(WDOGA_CTL);
-	r0.l = 0xAD6;
-	w[p0] = r0.l;
+	/* make sure SYSCR is set to use BMODE */
+	P0.h = hi(SICA_SYSCR);
+	P0.l = lo(SICA_SYSCR);
+	R0.l = 0x0;
+	W[P0] = R0.l;
 	SSYNC;
 
-	/* Clear the sticky bit incase it is already set */
-	p0.h = hi(WDOGA_CTL);
-	p0.l = lo(WDOGA_CTL);
-	r0.l = 0x8AD6;
-	w[p0] = r0.l;
-	SSYNC;
-
-	/* Program the count value */
-	R0.l = 0x100;
-	R0.h = 0x0;
-	P0.h = hi(WDOGA_CNT);
-	P0.l = lo(WDOGA_CNT);
-	[P0] = R0;
+	/* issue a system soft reset */
+	P1.h = hi(SICA_SWRST);
+	P1.l = lo(SICA_SWRST);
+	R1.l = 0x0007;
+	W[P1] = R1;
 	SSYNC;
 
-	/* Program WDOG_STAT if necessary */
-	P0.h = hi(WDOGA_CTL);
-	P0.l = lo(WDOGA_CTL);
-	R0 = W[P0](Z);
-	CC = BITTST(R0,1);
-	if !CC JUMP .LWRITESTAT;
-	CC = BITTST(R0,2);
-	if !CC JUMP .LWRITESTAT;
-	JUMP .LSKIP_WRITE;
-
-.LWRITESTAT:
-	/* When watch dog timer is enabled,
-	 * a write to STAT will load the contents of CNT to STAT
-	 */
-	R0 = 0x0000(z);
-	P0.h = hi(WDOGA_STAT);
-	P0.l = lo(WDOGA_STAT)
-	[P0] = R0;
-	SSYNC;
-
-.LSKIP_WRITE:
-	/* Enable the reset event */
-	P0.h = hi(WDOGA_CTL);
-	P0.l = lo(WDOGA_CTL);
-	R0 = W[P0](Z);
-	BITCLR(R0,1);
-	BITCLR(R0,2);
-	W[P0] = R0.L;
-	SSYNC;
-	NOP;
-
-	/* Enable the wdog counter */
-	R0 = W[P0](Z);
-	BITCLR(R0,4);
-	W[P0] = R0.L;
+	/* clear system soft reset */
+	R0.l = 0x0000;
+	W[P0] = R0;
 	SSYNC;
 
-	IDLE;
+	/* issue core reset */
+	raise 1;
 
 	RTS;
+ENDPROC(_bfin_reset)
 
 .data
 
-- 
1.5.1.2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux