Neil,
I ran the drives in RAID-0 as you suggested and noticed the same problem.
I also ran memtest86 over night but there were no errors.
I did notice this SIL3114 card doesn't play nice with the other
promise cards (or vice versa). I had to swap them arroudn in the PCI
slots for the system to boot at all. I'll try removing the additional
hardware and see if that resolves the issue.
Thanks, Jesse
On 5/16/07, Neil Brown <[email protected]> wrote:
On Wednesday May 16, [email protected] wrote:
>
> Here is what I am doing to test:
>
> fdisk /dev/sda1 and /dev/sb1 to type fd/Linux raid auto
> mdadm --create /dev/md1 -c 128 -l 5 -n 3 /dev/sda1 /dev/sdb1 missing
> mke2fs -j -b 4096 -R stride=32 /dev/md1
> e2fsck -f /dev/md1
> ---------------------
> Result: FAILS - fsck errors (Example: "Inode 3930855 is in use, but
> has dtime set.")
Very odd. I cannot reproduce this, but then my drives are somewhat
smaller than yours (though I'm not sure how that could be
significant).
Can you try a raid0 across 2 drives? That would be more like the
raid5 layout than raid1.
My guess is some subtle hardware problem, as I would be very
surprised in the raid5 code is causing this. Maybe run memtest86?
NeilBrown
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
