Re: 2.6.22-rc1-mm1 [cannot change thermal trip points]

In 2.6.20.9 I can change trippoints:

echo "105:100:100:78:70:40:30" > /proc/acpi/thermal_zone/TZ0/trip_points
echo 10  > /proc/acpi/thermal_zone/TZ0/polling_frequency

Then I got:
cat /proc/acpi/thermal_zone/TZ0/*
<setting not supported>
cooling mode:   active
polling frequency:       10 seconds
state:                   active[2]
temperature:             45 C
critical (S5):           105 C
active[0]:               78 C: devices=0xdf415a40
active[1]:               70 C: devices=0xdf4159dc
active[2]:               40 C: devices=0xdf41598c
active[3]:               30 C: devices=0xdf41593c

cat /proc/acpi/fan/*/*
status:                  off
status:                  off
status:                  on
status:                  on

And fan turns on.

In 2.6.22-rc1-mm1:
echo "105:100:100:78:70:40:30" > /proc/acpi/thermal_zone/TZ0/trip_points
bash: echo: write error: Błąd wejścia/wyjścia (input/output error)

rutek:/home/maciek# cat /proc/acpi/thermal_zone/TZ0/*
<setting not supported>
polling frequency:       10 seconds
state:                   ok
temperature:             45 C
critical (S5):           256 C
active[0]:               78 C: devices=0xc1827a40
active[1]:               70 C: devices=0xc18279dc
active[2]:               60 C: devices=0xc182798c
active[3]:               50 C: devices=0xc182793c
rutek:/home/maciek# cat /proc/acpi/fan/*/*
status:                  off
status:                  off
status:                  off
status:                  off

Fan turns on when temperature is over 50*C. (want: 30)

A read this:
http://article.gmane.org/gmane.linux.acpi.devel/22750

But I don't have colling_policy, but only colling_mode:
ls /proc/acpi/thermal_zone/TZ0/
cooling_mode  polling_frequency  state  temperature  trip_points

Its bug or feature?

Config, acpidump, dmesg:
http://www.unixy.pl/maciek/download/kernel/2.6.22-rc1-mm1/

-- 
Maciej Rutecki
www.unixy.pl
Kernel Monkeys
(http://kernel.wikidot.com/)

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature

---

• Follow-Ups:
  • Re: 2.6.22-rc1-mm1 [cannot change thermal trip points]
    • From: Chuck Ebbert <[email protected]>

• References:
  • 2.6.22-rc1-mm1
    • From: Andrew Morton <[email protected]>

• Prev by Date: Re: [PATCH 2/2] AFS: Implement shared-writable mmap
• Next by Date: Re: [rfc] optimise unlock_page
• Previous by thread: Re: 2.6.22-rc1-mm1
• Next by thread: Re: 2.6.22-rc1-mm1 [cannot change thermal trip points]
• Index(es):
  • Date
  • Thread

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]