ark3116: receive returns negative

[Jan Engelhardt <jengelh@linux01.gwdg.de>]

Hello,


I seem to have problems with the ark3116 driver from 2.6.18.8. This is a 
USB-RS232 cable. Just opening the /dev/ttyUSB0 device 
gives (this is the 
debug output enabled by `modprobe ark3116 debug=1`).

The lines that look suspicious are
/serial/ark3116.c: 124 < 1 bytes [0xFFFFFFB0]
and
/serial/ark3116.c: ark3116_ioctl cmd 0x5401 not supported

I have also seen things like "id here < -62 [0x10]", which would 
indicate that usb_control_msg() returned something very negative 
(-ETIME!?).

Issuing a write() on an open fd to ttyUSB does not generate any further 
debug output. Is the driver even complete/functional?
I do not know where to go from here, please advise.


Full output:
/serial/ark3116.c: ark3116_open - port 0
/serial/ark3116.c: 111 < 1 bytes [0x03]
/serial/ark3116.c: 112 > ok
/serial/ark3116.c: 113 > ok
/serial/ark3116.c: 114 > ok
/serial/ark3116.c: 115 > ok
/serial/ark3116.c: 116 < 1 bytes [0x03]
/serial/ark3116.c: 117 > ok
/serial/ark3116.c: 118 < 1 bytes [0x02]
/serial/ark3116.c: 119 > ok
/serial/ark3116.c: 120 < 1 bytes [0x00]
/serial/ark3116.c: 121 > ok
/serial/ark3116.c: 122 < 1 bytes [0x01]
/serial/ark3116.c: 123 > ok
/serial/ark3116.c: 124 < 1 bytes [0xFFFFFFB0]
/serial/ark3116.c: ark3116_set_termios - port 0
/serial/ark3116.c: setting CS8
/serial/ark3116.c: setting parity to NONE
/serial/ark3116.c: setting 1 stop bit
/serial/ark3116.c: 000 < 1 bytes [0x02]
/serial/ark3116.c: setting baudrate to 9600 (->reg=312)
/serial/ark3116.c: 147 > ok
/serial/ark3116.c: 148 > ok
/serial/ark3116.c: 149 > ok
/serial/ark3116.c: 150 > ok
/serial/ark3116.c: 151 < 1 bytes [0x03]
/serial/ark3116.c: 152 > ok
/serial/ark3116.c: updating bit count, stop bit or parity (cfg=0x03)
/serial/ark3116.c: 153 < 1 bytes [0x00]
/serial/ark3116.c: 154 > ok
/serial/ark3116.c: ark3116_ioctl cmd 0x5401 not supported


	Jan
-- 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/